Dynoracing BX101476

Contents

Dynoracing 60MM Tachometer User Manual

Model: BX101476

1. Introduction

Thank you for purchasing the Dynoracing 60MM Tachometer. This manual provides essential information for the proper installation, operation, and maintenance of your new RPM gauge. Please read this manual thoroughly before installation and use to ensure optimal performance and safety.

Dynoracing 60MM Tachometer with white lighting
Dynoracing 60MM Tachometer with white lighting.
Dynoracing 60MM Tachometer showing both white and amber lighting options
The tachometer features switchable white and amber backlighting.

2. Package Contents

Ensure all items listed below are present in your package:

  • 1 x RPM Gauge
  • 1 x Gauge Stand with mounting accessories
  • 2 x Cables (for power and signal connections)
  • 1 x Screw knob
  • 1 x Installation Manual (printed, refer to PDF for detailed wiring)
  • 1 x Retail Dynoracing Box
Contents of the Dynoracing Tachometer package
All components included in the Dynoracing Tachometer package.

3. Features

  • High-speed stepper motor for quick response.
  • Two installation methods: flush mount or surface mount.
  • Switchable backlighting: White or Amber.
  • Warning light (RED) for adjustable RPM limits.
  • RPM range: 0 - 10,000 RPM.
  • Reads RPM directly from your vehicle's ECU.
  • Compatible with 4, 6, and 8-cylinder gasoline engines (12V systems).
  • Adjustable warning settings.
  • Peak display function to show the highest recorded RPM.
  • Opening ceremony calibration upon power-on for accurate readings.

4. Installation

4.1 Mounting the Gauge

The tachometer offers two primary installation methods:

  1. Flush Mount: Use the included mounting ring to secure the gauge directly into a dashboard opening.
  2. Surface Mount: Utilize the gauge stand and cup for mounting on top of the dashboard or another flat surface.
Diagram showing two installation methods for the tachometer
Installation Method 1 (flush mount with ring) and Method 2 (surface mount with cup and stand).

4.2 Wiring Instructions

The tachometer takes RPM readings directly from your vehicle's ECU. Detailed wiring diagrams and instructions are provided in the included printed Installation Manual and the official PDF manual. It is crucial to follow these instructions carefully to avoid damage to the gauge or your vehicle's electrical system. If you are unsure about the wiring process, it is recommended to seek professional assistance.

For a comprehensive guide, please refer to the official user manual PDF: User Manual (PDF).

5. Operating Instructions

5.1 Initial Power-On and Calibration

When initially powered on, the gauge will perform an opening ceremony, which calibrates the gauge to ensure accurate readings. The needle will sweep across the dial and return to zero.

Video demonstrating the tachometer's startup sequence and lighting change (white to amber).

5.2 Changing Backlight Color

The gauge can be wired to light up either white or amber. Refer to the wiring instructions in the Installation Manual for details on how to select your preferred color.

Four views of the tachometer displaying white and amber lighting, both on and off
The tachometer displaying white and amber lighting options.

5.3 Setting Alarm Points and Cylinder Count

After the self-check, hold the button for 5 seconds. The pointer lights will flicker. Release the button, then press it again to set the alarm point. Press continuously and quickly for fine-tuning, or hold for rapid adjustment. After approximately 5 seconds, the pointer will automatically return to zero, and you can proceed to the next step.

To set the cylinder count (4/6/8 cylinder), after the self-test or after the pointer returns to zero, hold the button for 10 seconds. The pointer lights will flicker. Release the button, then press it to cycle through cylinder options. Release the button, and after 5 seconds, the pointer will automatically return to zero.

When the meter reaches the set alarm value, the warning lights will flicker continuously.

5.4 Using the PEAK Display Function

After the self-checking sequence is complete, press and release the button. The 'PEAK' indicator (blue light) will illuminate. To clear the PEAK value, hold the button again for 3 seconds. When the 'PEAK' light flashes, release the button. The PEAK value is now cleared, and the pointer will return to zero after about 3 seconds.

6. Specifications

AttributeValue
Brand NameDynoracing
Model NumberBX101476
Special FeaturesTachometer
Measurement Range0-10000 RPM
Item Weight0.4 KG
Item Height60mm
Item Width60mm
Item Length60mm
Material TypeABS+Steel
ColorBlack Case / Red & Amber Lighting
Number Of Cylinders4/6/8
Fitment12V, 4/6/8 cylinder, Gasoline car
Placement on VehicleFront
OriginMainland China

7. Maintenance

To ensure the longevity and accurate performance of your Dynoracing Tachometer, follow these maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the gauge face and body. Avoid abrasive cleaners or solvents that could damage the finish or display.
  • Environmental Conditions: While designed for automotive use, avoid exposing the gauge to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
  • Wiring Inspection: Periodically check all wiring connections to ensure they are secure and free from corrosion or damage. Loose connections can lead to inaccurate readings or intermittent operation.

8. Troubleshooting

8.1 Gauge Not Powering On or Inaccurate Readings

  • Check all power and ground connections for proper installation and secure contact.
  • Verify that the gauge is receiving 12V power.
  • Ensure the RPM signal wire is correctly connected to your vehicle's ECU.
  • Confirm the cylinder setting on the gauge matches your engine (4, 6, or 8 cylinder).

8.2 Buzzing Sound

If the gauge produces a buzzing sound, you can disable it:

  • Restart the power supply to the gauge.
  • Immediately hold down the button on the gauge.
  • Continue holding the button until the buzzing sound disappears.
  • Release the button.
  • To re-enable the buzzing sound, repeat the process.

8.3 Warning Light Not Functioning

  • Ensure the warning RPM threshold has been correctly set as described in Section 5.3.
  • Verify that the engine RPM is actually reaching or exceeding the set warning threshold.

9. User Tips

  • Compatibility Check: This tachometer is designed for 12V gasoline cars with 4, 6, or 8-cylinder engines. Before purchasing or installing, confirm your vehicle's specifications match these requirements.
  • Professional Installation: For complex wiring or if you are unfamiliar with automotive electrical systems, consider professional installation to ensure correct setup and prevent potential damage.
  • Refer to PDF Manual: The included printed manual provides basic instructions. For more detailed wiring diagrams and advanced settings, always refer to the comprehensive PDF user manual.

10. Warranty and Support

For warranty information, technical support, or any product-related inquiries, please contact the Dynoracing official store or your point of purchase. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.