1. Product Overview
The HYULIGHTS 6x15W RGBW 4in1 LED Mini Bee Eye Moving Head Light is a versatile stage lighting effect designed for professional stage and DJ applications. It features six powerful 15W CREE 4-in-1 LEDs, offering RGBW color mixing for a wide spectrum of vibrant colors. With its beam, wash, and zoom effects, this moving head light provides dynamic and engaging visual displays.


Key Features:
- 6x15W CREE 4-in-1 RGBW LEDs
- Beam, Wash, and Zoom effects
- DMX control with 15 channels
- Self-contained installation method
- Efficient cooling fan for heat dissipation
- Compact and lightweight design
2. Safety Information
- Always connect the unit to a grounded power outlet.
- Ensure proper ventilation; do not block the cooling fan.
- Do not operate the unit in wet or damp conditions.
- Avoid direct eye exposure to the light source.
- Disconnect power before cleaning or servicing.
- This product is for professional use; installation and operation should be performed by qualified personnel.
3. Setup
3.1 Unpacking and Inspection
Carefully unpack the fixture and check for any damage during transportation. If any damage is found, do not operate the unit and contact your supplier immediately.
3.2 Mounting the Fixture
The fixture is designed for self-contained installation, meaning it can be placed on a flat surface or mounted using appropriate clamps and safety cables (not included). Ensure the mounting surface or structure can support the weight of the fixture (6.0 kg) and any additional equipment. Always use a safety cable when mounting overhead.
3.3 Power Connection
Connect the fixture to an AC power source within the specified voltage range of 90-240V (AC110V-250V). Ensure the correct plug type (EU, US, AU, UK) is used for your region. The power input port is located on the rear of the unit.
3.4 DMX Connection
For DMX control, connect a DMX cable from your DMX controller to the DMX IN port on the fixture. If linking multiple fixtures, connect the DMX OUT of the first fixture to the DMX IN of the next, and so on. The DMX ports are 3-pin XLR connectors.


4. Operating Instructions
4.1 Control Panel
The fixture features an LED display and four control buttons: MENU, UP, DOWN, and ENTER. These buttons allow you to navigate through the menu options and adjust settings.
- MENU: Cycles through the main menu options.
- UP: Increases values or moves up in menu options.
- DOWN: Decreases values or moves down in menu options.
- ENTER: Confirms selections or enters sub-menus.
4.2 Operating Modes
The Mini Bee Eye Moving Head Light typically supports several operating modes:
- DMX Mode: Allows full control over all functions (color, movement, zoom, strobe) via a DMX controller. The fixture uses 15 DMX channels. Refer to the DMX chart (usually provided in a separate manual or on the manufacturer's website) for specific channel assignments.
- Auto Mode: The fixture runs through pre-programmed light shows automatically. You can often select different auto programs via the control panel.
- Sound Active Mode: The fixture reacts to sound and music, creating dynamic light shows synchronized with the beat. Sensitivity can usually be adjusted.
- Master/Slave Mode: Link multiple fixtures together. One fixture acts as the 'Master' (e.g., in Auto or Sound Active mode), and the others act as 'Slaves', mirroring the Master's actions.
4.3 Light Effects
The fixture produces vibrant RGBW 4-in-1 color mixing, allowing for a wide range of hues. It also features beam, wash, and zoom effects, providing flexibility for various lighting designs. The 10-degree lens angle creates sharp beams.


4.4 Product Demonstration Video
Watch this video for a visual demonstration of the HYULIGHTS Mini Bee Eye Moving Head Light's features and effects.
5. Maintenance
5.1 Cleaning
Regular cleaning of the fixture is essential to maintain optimal performance and extend its lifespan. Use a soft, lint-free cloth to wipe down the exterior. For lenses, use a specialized lens cleaning solution and cloth to avoid scratches. Ensure the unit is powered off and disconnected from the mains before cleaning.
5.2 Cooling System
The fixture is equipped with a cooling fan for efficient heat dissipation. Periodically check that the fan intake and exhaust vents are clear of dust and debris. Blocked vents can lead to overheating and reduced performance.
5.3 Storage
When not in use, store the fixture in a dry, dust-free environment. If storing for extended periods, consider using a protective case to prevent damage.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Power cable not connected; no power from outlet; fuse blown | Check power cable connection; test outlet; replace fuse if necessary |
| No light output | Fixture in blackout mode; DMX signal issue; LED failure | Check DMX controller settings; verify DMX cable; contact support if LEDs are faulty |
| No DMX control | Incorrect DMX address; faulty DMX cable; DMX controller issue | Verify DMX address setting on fixture; test DMX cable; check DMX controller functionality |
| Fixture overheating | Blocked ventilation; prolonged use in high ambient temperature | Ensure vents are clear; operate in a well-ventilated area; allow cool-down periods |
| Erratic movement/behavior | Intermittent DMX signal; internal fault | Check DMX connections; try resetting the fixture; contact support |
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | HYULIGHTS |
| Model Number | 6x15w |
| Item Type | Stage Lighting Effect |
| Occasion | Professional Stage & DJ |
| LED Source | 6pcs*15W CREE 4IN1 LED |
| Color Emitting | RGBW 4in1 color mixing |
| Total Power | 150W |
| Power Source | AC |
| Voltage | 90-240V (AC110V-250V) |
| Nominal Voltage | Other |
| Bulbs Included | Yes |
| Luminous Flux | >82000 |
| DMX Channels | 15chs |
| Lens Angle | 10 degree |
| Installation Method | self-contained |
| Certification | CE, RoHS |
| High-concerned chemical | None |
| Origin | Mainland China |
| Package Dimensions (L x W x H) | 23 cm x 23 cm x 25 cm |
| Package Weight | 6.0 kg |
8. User Tips
- DMX Setup: When setting up DMX, ensure all fixtures have unique DMX addresses and that the last fixture in the chain has a DMX terminator connected to its DMX OUT port to prevent signal reflection.
- Mounting Options: While the fixture is self-contained, consider investing in sturdy clamps and safety cables for overhead mounting to ensure maximum safety and flexibility in placement.
- Power Cycle: If the fixture behaves unexpectedly, a simple power cycle (turning it off, waiting a few seconds, then turning it back on) can often resolve minor glitches.
9. Warranty and Support
This HYULIGHTS product is certified with CE and RoHS standards, ensuring compliance with European safety, health, and environmental protection requirements. For any technical support, warranty claims, or service inquiries, please contact the manufacturer or your point of purchase. Keep your proof of purchase for warranty validation.