1. Introduction
This manual provides detailed instructions for the safe and proper installation and use of your Wallpad 146x86mm Wall Switch and Socket Mounting Box. This universal box is designed to house 146*86mm switches and sockets, commonly used for 3X6 British double frame panels. Please read all instructions carefully before beginning installation.
2. Safety Information
Warning: Always prioritize safety during installation.
- Always cut off the power supply to the circuit before installation. Use an electric tester to confirm there is no electricity.
- Do not drill or chisel into walls without first checking for hidden wires, water pipes, or gas pipes to prevent leaks or short circuits.
- Use appropriate tools correctly to prevent injury.
- Ensure the installation height complies with local home electrical safety requirements.
- Do not modify the box structure or use non-compatible electrical components.
- If you are not familiar with electrical operations, please hire a professional electrician.
3. Product Overview
The Wallpad 146x86mm Mounting Box is a durable and versatile solution for installing wall switches and sockets. It features a stable structure designed to withstand significant pressure and includes moveable screw bolts for easy adjustment during installation.
Product showcase video for the 146 Mounting Box by Wallpad, demonstrating its features and compatibility.
4. Installation Steps
Tools Needed:
- Electric drill
- Screwdriver
- Level
- Tape measure
- Pencil
Materials Needed:
- 86-type wall mount box (provided)
- Expansion screws / plastic expansion tubes
- Self-tapping screws
- Decorative cover (for switch/socket)
4.1. Concealed Installation (New Decoration)
- Mark the installation position with a pencil. For sockets, typically 30cm above the ground; for switches, typically 120-130cm above the ground.
- Chisel a groove in the wall slightly larger than the box (approx. 86x86x40/50mm).
- Place the box into the groove, use a level to ensure it is perfectly horizontal, and fix it in place with cement mortar.
- Allow 24 hours for the mortar to cure completely before proceeding. Then, install your switches/sockets and cover with the decorative cover.
4.2. Surface-mounted Installation (Renovation)
- Mark the screw hole positions on the wall according to the box's hole spacing (60mm).
- Drill holes at the marked positions and insert expansion screws or plastic expansion tubes.
- Align the mounting box with the drilled holes and fix it firmly with self-tapping screws. Use a level to ensure it is straight.
- Install electrical components (switches/sockets) and the decorative cover.
5. Usage & Limitations
This Wallpad mounting box is designed for general home use with 146*86mm wall switches and sockets.
Limitations:
- Not suitable for industrial high-load electrical equipment.
- Do not install in damp areas (e.g., bathrooms without waterproof treatment) or outdoor environments.
- Maximum load capacity: 2kg (total weight of installed electrical components).
6. Operating Instructions
The Wallpad mounting box is a passive component designed to safely house electrical switches and sockets within a wall. Once installed, its primary function is to provide a secure and compliant enclosure for your electrical devices. There are no active operating steps for the box itself; operation pertains to the switches and sockets installed within it.
7. Maintenance
The Wallpad mounting box requires minimal maintenance. Ensure the area around the installed switch or socket is kept clean and free from dust and debris. Periodically check that the switch/socket plate is securely fastened to the box. Do not use harsh chemicals or abrasive cleaners on the box or any installed components.
8. Troubleshooting
As a passive component, the mounting box itself typically does not experience operational issues. Most problems would relate to the installation process or the electrical components housed within it.
- Loose Fit: If the switch/socket feels loose after installation, ensure the screws securing it to the box are tightened properly. If the box itself is loose in the wall (for concealed installation), the mortar may not have cured correctly or the groove was too large. For surface-mounted, check the self-tapping screws.
- Incompatible Components: Ensure that any switches or sockets being installed are compatible with the 146x86mm standard and fit correctly within the box dimensions.
- Electrical Issues: Any electrical issues (e.g., no power, flickering lights) are likely related to the wiring or the switch/socket itself, not the mounting box. Consult a qualified electrician for diagnosis and repair.
9. Specifications
| Feature | Detail |
|---|---|
| Brand Name | Wallpad |
| Model Number | Box For 146*86mm Switch & Socket |
| Material | PVC, Imported High Quality PC |
| Origin | Mainland China |
| Certification | CE |
| Size | 133*82*55mm |
| Function | For 3X6 British double frame 146*86mm |
| Color | White |
| Design | Universal Box used for all 146*86MM switch& Socket |
| Place of Origin | WenZhou China (Mainland) |
| Mounting Hole Distance | 120mm |
| High-concerned chemical | None |
| Maximum Load Capacity | 2kg |
10. User Tips
- Users have noted the material feels resistant and the box matches described dimensions and images, indicating good quality and accurate sizing.
- For installations in wooden walls, self-tapping screws are recommended for secure fastening.
- When installing outlets, especially if they will bear significant weight or frequent use, ensure the box is very well secured. Some users suggest deeper boxes might be preferable for outlets if not adequately reinforced.
- If applying wallpaper, the precise fit of this box means edges may not be visible, contributing to a clean finish.
11. Warranty and Support
This Wallpad mounting box comes with a 12-year warranty.
Manufacturer Information:
- Full Name: WenZhou Wallpad Electric Co.,LTD
- Country: China
- City: Wenzhou Zhejiang Province
- Detailed Address: No.86 Jin Feng Xi Lu, Tian He Street, Long Wan Qu, Wen Zhou City, China
- Postal Code: 325000
- Phone Number: 86-15167890330
- Email Address: 278907249@qq.com
Responsible Person for Compliance (EU Region):
- Name: Humiss International B.V.
- Country: Netherlands
- Address: Joop Geesinkweg 701, Amsterdam-Duivendrecht, the Netherlands
- Phone Number: +31 (0)20 369 8116
- Email Address: business@humiss.com
12. Compliance Information
- Compliance Mark: CE Mark
- Applicable Directives & Standards:
- EU Directive: 2014/35/EU (Low Voltage Directive)
- Harmonized Standards: EN 60670-1:2018, IEC 60670-1:2018
- National Standard (China): GB/T 17466-2022
For further details, please refer to the official user manual PDF: User manual (PDF)