FMS 70mm Viper V2

Contents

FMS 70mm Viper V2 PNP 15th Anniversary Edition EDF Jet Instruction Manual

Model: 70mm Viper V2

Brand: FMS

1. Introduction

Congratulations on your purchase of the FMS 70mm Viper V2 PNP 15th Anniversary Edition EDF Jet. This high-performance electric ducted fan (EDF) jet is designed for intermediate to expert pilots, offering an exhilarating remote control flying experience. The 15th Anniversary Edition features significant improvements, including a full set of CNC metal shock-absorbing landing gear (also known as kneeling nose gear), enhancing simplicity, stability, and ease of handling during takeoff, flight, and landing.

FMS 70mm Viper V2 15th Anniversary Edition EDF Jet in flight, highlighting its 'Super Viper V2' designation and CNC metal shock absorbing landing gear.

FMS 70mm Viper V2 15th Anniversary Edition EDF Jet

2. Safety Information

WARNING: This is not a toy! Improper use can lead to serious injury or property damage.

  • This product is intended for recreation use only.
  • Illegal modification of drones/planes is strictly prohibited.
  • Always adhere to the relevant laws and regulations concerning the use of drones/planes in your country or area to ensure legal and safe operation.
  • Minimum Age Recommendation: 14 years and older.
  • Operator Skill Level: Intermediate to Expert.
  • Recommended Environment: Outdoor, in open areas free from obstacles, people, and animals.
  • Always maintain a safe distance from yourself and others during operation.
  • Never fly near airports, restricted airspace, or in adverse weather conditions.

3. Package Contents

The FMS 70mm Viper V2 PNP (Plug-N-Play) package includes the following:

  • Assembled aircraft components (fuselage, wings, tail sections)
  • Pre-installed motor (3060KV1900 Inner runner)
  • Pre-installed Electronic Speed Controller (80A ESC)
  • Pre-installed Servos (8x 9g metal digital servos)
  • Pre-installed 70mm Ducted Fan (12-blade)
  • CNC metal shock-absorbing landing gear
  • Operating Instructions Manual
  • Original Box

NOTE: A 2.4Ghz 6-channel transmitter (radio), receiver, 6S 3300mAh 35C LiPo battery, and compatible charger are NOT included and must be purchased separately.

4. Specifications

FeatureSpecification
Wingspan1100mm (43.3 inches)
Overall Length1025mm (40.4 inches)
Flying WeightAround 1795g
Motor Size3060KV1900 Inner runner
ESC80A
Servo8x 9g metal digital servo
Radio (Not included)2.4Ghz 6 Channel
CG (Center of Gravity)90-95mm from the leading edge of Main Wing
EDF Size70mm Ducted Fan (12-blade)
Recommended Battery (Not included)6S 3300mAh 35C LiPo
AileronYes
ElevatorYes
RudderYes
FlapsYes
RetractsYes
Approx. Flying Duration4 minutes
Minimum Age Recommendation14+
Experience LevelIntermediate
Recommended EnvironmentOutdoor
Assembly Time10~30 minutes
Assembly RequiredYes
MaterialDurable EPO, Carbon Fiber, Metal, Plastic
Power SourceElectric
Remote ControlYes (Transmitter not included)
Controller ModeMODE1, MODE2
Controller BatteryNot included
Charging Time3-4 hours (for recommended battery)
Charging Voltage22.2V (for recommended battery)
Aerial PhotographyNo
Detailed specifications table for the FMS 70mm Viper V2, including wingspan, length, flying weight, motor, ESC, servo, radio, CG, EDF size, recommended battery, control surfaces, flight duration, age, experience, environment, assembly time, and material.

Detailed Specifications and Dimensions

5. Assembly Instructions

The FMS 70mm Viper V2 comes in an 'Almost Ready' state, requiring minimal assembly, typically 10-30 minutes. The design incorporates screw-together construction and pre-installed ball-head joints for ease of assembly and precise control.

  1. Unpack Components: Carefully remove all aircraft components from the packaging. Identify the fuselage, main wings, horizontal stabilizers, and vertical stabilizer.
  2. Wing Assembly: Attach the main wings to the fuselage using the provided screws. Ensure the connections are secure. The design features screw-together construction for a firm fit.
  3. Tail Assembly: Secure the horizontal and vertical stabilizers to the rear of the fuselage. Verify that all control surfaces (ailerons, elevator, rudder, flaps) move freely and are correctly aligned.
  4. Landing Gear: The CNC metal shock-absorbing landing gear is pre-installed. Ensure it extends and retracts smoothly if applicable, and that all wheels spin freely.
  5. Cockpit Installation: The cockpit features a convenient clip-on design. Secure it in place after any internal adjustments or battery installation.
  6. Control Surface Connections: Verify that the pre-installed ball-head joints are properly connected to the control horns on the ailerons, elevator, rudder, and flaps, providing precise surface control.
  7. Final Inspection: Double-check all connections, screws, and moving parts to ensure they are secure and functioning correctly before proceeding to the pre-flight checklist.
Disassembled FMS 70mm Viper V2 components, showing the fuselage, wings, and tail sections ready for assembly.

Main components of the FMS 70mm Viper V2 before assembly

Close-up view of the pre-installed ball-head joints for precise surface control and the screw-together construction of the FMS 70mm Viper V2.

Pre-installed ball-head joints and screw-together construction

Image showing the CNC metal shock absorbing landing gear and the lightweight EPO material construction of the FMS 70mm Viper V2.

CNC metal shock absorbing landing gear and EPO material

Detailed view of the FMS 70mm Viper V2 cockpit with a scale-realistic pilot and the clip-on cockpit design mechanism.

Clip-on cockpit design with scale-realistic pilot

6. Pre-Flight Checklist

Before each flight, perform the following checks to ensure safe operation:

  • Battery Check: Ensure your 6S 3300mAh 35C LiPo flight battery is fully charged and securely installed in the aircraft.
  • Radio System: Power on your 6-channel transmitter and receiver. Confirm proper binding and functionality of all control channels (ailerons, elevator, rudder, throttle, flaps, retracts).
  • Control Surface Movement: Verify that all control surfaces move freely and in the correct direction relative to your transmitter inputs. Check for any binding or excessive play.
  • Center of Gravity (CG): Confirm the aircraft's center of gravity is within the recommended range of 90-95mm from the leading edge of the main wing. Adjust battery position if necessary.
  • Mechanical Connections: Inspect all screw-together connections and linkages for tightness and security.
  • Landing Gear: Check that the CNC metal landing gear extends and retracts properly and that the wheels are securely attached and spin freely.
  • Propeller/EDF Unit: Ensure the 70mm 12-blade EDF unit is free of debris and spins smoothly without obstruction.
  • Environmental Check: Confirm you are in a suitable outdoor flying area, free from obstacles, people, and other aircraft. Check weather conditions for safe flight.

7. Operating Instructions

The FMS 70mm Viper V2 is an EDF jet designed for outdoor flight by intermediate to expert pilots. It supports Controller Modes 1 and 2, which should be configured on your transmitter.

  • Takeoff: With the CNC metal shock-absorbing landing gear, the Viper V2 offers stable ground handling. Apply throttle smoothly and maintain directional control with the rudder. Once sufficient speed is gained, gently apply elevator to lift off.
  • Flight: The Viper V2 is known for its simplicity, stability, and ease of handling. Practice smooth control inputs. Utilize the ailerons, elevator, and rudder for precise maneuvering. Flaps can be used for slower flight and landing approaches.
  • Approximate Flight Duration: Expect approximately 4 minutes of flight time with the recommended 6S 3300mAh 35C LiPo battery, depending on throttle management. Monitor your battery voltage closely.
  • Landing: Approach the landing strip into the wind. Deploy flaps as needed to reduce speed. Manage throttle to control descent rate and use elevator for pitch control. Aim for a smooth touchdown on the main landing gear, then gently lower the nose wheel.
Close-up view of the high-quality 80A ESC, powerful KV1900 in-runner motor, and the latest 70mm 12-blade EDF unit, which are key components for the jet's performance.

High-performance EDF unit with motor and ESC

8. Maintenance

Regular maintenance will ensure the longevity and optimal performance of your FMS 70mm Viper V2.

  • Post-Flight Inspection: After each flight, visually inspect the aircraft for any damage, cracks in the EPO foam, loose connections, or bent landing gear.
  • Cleaning: Clean the aircraft body with a soft, damp cloth to remove dirt, grass stains, or debris. Avoid using harsh chemicals.
  • Component Check: Periodically check the motor, ESC, and servos for any signs of wear or malfunction. Ensure all servo linkages are free-moving and secure.
  • Landing Gear Maintenance: Inspect the CNC metal landing gear for smooth operation. Lubricate moving parts if necessary.
  • Battery Care: Always store LiPo batteries at a storage voltage and in a fire-safe bag. Do not overcharge or over-discharge batteries.

9. Troubleshooting

This section provides general troubleshooting tips for common issues. For more complex problems, please contact customer support.

  • Aircraft not responding to controls:
    - Check if the transmitter and receiver are powered on and properly bound.
    - Ensure the flight battery is charged and correctly connected.
    - Verify all servo connections are secure and servos are functioning.
  • Motor not spinning or weak thrust:
    - Check battery charge level.
    - Inspect motor and ESC connections for looseness or damage.
    - Ensure the EDF unit is free of obstructions.
    - Check for any damage to the motor or EDF blades.
  • Aircraft pulls to one side during takeoff/flight:
    - Check control surface trims on your transmitter.
    - Inspect control surfaces for proper alignment and ensure they are not bent or warped.
    - Verify landing gear is straight and wheels are aligned.
  • Short flight times:
    - Ensure the battery is fully charged.
    - Check battery health; older batteries may have reduced capacity.
    - Reduce aggressive throttle usage during flight.

Disclaimer:

⚠️️For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.

11. Support

For technical assistance, spare parts, or any questions not covered in this manual, please contact your retailer or the manufacturer directly. Please have your product model number (70mm Viper V2) and any relevant purchase information ready when contacting support.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.