NB ERGONOMIC P4

Contents

NB NEW P4 Full Motion TV Wall Mount

Model: P4

Introduction

Thank you for choosing the NB NEW P4 Full Motion TV Wall Mount. This articulating bracket is designed to securely hold 32-55 inch LED and LCD televisions, offering a retractable 3-arm swing for optimal viewing flexibility. With a robust metal construction and a maximum load capacity of 70kg (154 lbs), it provides a safe and versatile solution for your home entertainment setup. This manual provides detailed instructions for proper installation, operation, and maintenance.

NB NEW P4 Full Motion TV Wall Mount

Overview of the NB NEW P4 Full Motion TV Wall Mount.

Safety Precautions

WARNING: Improper installation or use of this product can result in serious injury or damage. Please read and understand all instructions before assembly and use.

  • Products must be installed by professionals.
  • Contact qualified installers if you have difficulty understanding instructions or encounter problems.
  • Do not assemble or install if any product components or accessories are damaged or missing. Contact your local supplier for replacement parts.
  • This product is suitable for 32"-55" LCD/plasma screens with a maximum load capacity of 27.2kg (60lbs).
  • The wall for installation must be able to support three times the total weight of the mount, TV, and related accessories.
  • This product is designed for vertical wall mounting with wooden studs or solid concrete/masonry walls. The minimum stud size required is 2"x4" (51x102mm).
  • Do not use this product for purposes other than its designated design.
  • The product design includes sliding parts; handle with care during assembly and operation.
  • Ensure that the TV's power cable is not damaged during installation.
  • All power and data cables must be protected against twisting, compression, or cutting.
  • The manufacturer is not responsible for damages to the wall caused by overloading or accidents.
  • The manufacturer disclaims any responsibility for damages or physical injuries resulting from self-modification, improper installation, overloading, incorrect use, or wear and tear of the product.

Package Contents

Please verify that all parts are included and undamaged before proceeding with installation.

Part Description Quantity
AM4x25 Screws4X
BM6x25 Screws4X
CM8x30 Screws4X
DM6 Screws4X
EM6x12 Screws4X
FWall Anchors (Φ15x48.2x10)4X
G10mm Wrench1X
HM7x70 Screws2X
IWall Anchors (Φ10x47x66)2X

Note: Some hardware included may not be used depending on your specific installation.

Specifications

Feature Detail
Model NumberP4
Brand NameNB ERGONOMIC
Screen Size Suitable32" - 55" (LED, LCD TVs)
Maximum Load Weight27.2kg (60 lbs) / 70kg (154 lbs)
Standard VESA100x100, 200x100, 200x200, 300x200, 300x300, 400x200, 400x400 mm
Adjustment TypeFull-Motion
Tilt Angle+8° to -5°
Swivel Angle180°
Level Adjust±4°
Distance to WallAdjustable from 50mm to 400mm
Enclosure MaterialMetal
Number of Panels1
Installation TypeWall Mounting
OriginMainland China
Detailed dimensions of the TV wall mount

Detailed dimensions of the mount.

VESA plate dimensions and compatibility

VESA plate dimensions and compatible hole patterns.

Setup & Installation

Before you begin, ensure you have all the necessary tools and that your wall structure can support the mount and your TV. Professional installation is highly recommended.

Video Installation Guide

This video demonstrates the assembly and installation process for the TV wall mount.

Step-by-Step Instructions

  1. Remove VESA Plate for later use

    Carefully remove the VESA plate from the main mount unit. This plate will be attached to your TV later.

  2. Install Flexi Mount onto Masonry or Concrete Wall

    For masonry or concrete walls, use the appropriate wall anchors (F) and screws (H). Mark the drilling points using the mount as a template. Drill holes of 10mm diameter and 70mm depth. Insert the wall anchors, then secure the mount to the wall using the screws. Ensure screws are firmly tightened.

    Installation on masonry or concrete wall

    Mounting the bracket to a wall.

  3. Install Flexi Mount onto Wood Stud

    For wood stud walls, locate the center of the wood stud. Mark the drilling points using the mount as a template. Drill pilot holes of 4mm diameter and 70mm depth. Secure the mount directly to the wood stud using the appropriate screws (H). Ensure screws are firmly tightened.

  4. Display Installation (Attach TV)

    Attach the VESA plate (removed in step 1) to the back of your TV using the appropriate M4, M6, or M8 screws (A, B, C, D, E) that fit your TV's VESA pattern. Once the VESA plate is securely attached to the TV, carefully lift the TV and hook the VESA plate onto the main arm of the wall mount. Secure the TV to the mount using the provided locking mechanisms or screws.

    TV attached to wall mount

    TV attached to the wall mount.

  5. Cable Management

    Utilize the integrated cable covers to hide and organize your TV cables. Route the cables through the designated channels on the mount arms to maintain a clean and tidy appearance and prevent damage to the cables.

    Cable cover feature

    Illustration of the cable cover feature.

Operating Instructions

The NB NEW P4 mount offers various adjustments for optimal viewing.

  • Tilt Adjustment: The TV can be tilted up to +8 degrees and down to -5 degrees. Loosen the tilt adjustment screws, set the desired angle, and then re-tighten the screws to secure the position. Tilt up/down adjustment diagram

    Diagram showing tilt adjustment range.

  • Swivel Adjustment: The mount allows for a 180-degree swivel, enabling you to position your TV for viewing from different angles in the room. Gently push or pull the TV to the desired swivel angle.
  • Distance to Wall Adjustment: The retractable arms allow you to adjust the distance of the TV from the wall, ranging from a minimum of 50mm to a maximum of 400mm. Extend or retract the arms as needed. Adjustable distance from wall diagram

    Diagram illustrating adjustable distance from the wall.

  • Level Adjustment: The mount features a ±4° level adjustment to ensure your TV is perfectly horizontal after installation. Use the provided tools to fine-tune the level. Level adjust diagram

    Diagram showing the ±4° level adjustment.

Maintenance

  • Periodically check all screws and connections to ensure they remain tight and secure.
  • Clean the mount with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the finish.
  • Ensure that the moving parts of the mount operate smoothly. If any stiffness is observed, consult a professional.

Troubleshooting

  • Mount feels loose: Re-check all wall mounting screws and TV attachment screws. Ensure they are tightened according to the instructions. Do not overtighten.
  • Difficulty adjusting TV position: Check for any obstructions. Ensure all adjustment mechanisms are properly loosened before attempting to move the TV, and re-tightened once the desired position is achieved.
  • TV is not level: Use the ±4° level adjustment feature to correct the horizontal alignment.

User Tips

  • Always double-check your TV's VESA pattern and weight before purchasing and installing to ensure compatibility.
  • When installing on a wood stud, use a stud finder to accurately locate the center of the stud for maximum security.
  • For optimal cable management, bundle cables together with ties before routing them through the mount's cable covers.

Frequently Asked Questions

Q: Can this mount be used for a 32-inch television?
A: Yes, this mount is designed to support televisions ranging from 32 inches to 55 inches.

Warranty & Support

For detailed warranty information, technical support, or if you require further assistance, please refer to the official user manual PDF or contact your retailer.

A comprehensive user manual in PDF format is available for download: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.