1. Introduction
The LAUNCH X431 SmartLink C 2.0 is a heavy-duty vehicle diagnostic module designed to expand the capabilities of compatible LAUNCH X431 diagnostic tablets. Operating on a Linux system with dual Cortex-A7+Cortex-M7 processors, 8GB RAM, 256MB storage, and a 320x480 resolution display, it supports Bluetooth, Wi-Fi, and USB communication. This module enables comprehensive system-wide fault diagnosis, including code reading, code clearing, data stream analysis, special functions, and action testing for a wide range of commercial vehicles, passenger cars, and new energy vehicles. It is specifically designed to work with LAUNCH X431 V+, X431 PRO3, and X-431 PRO3S series tablets.

2. Package Contents
The X431 SmartLink C 2.0 package includes the following items. Please verify all components upon unboxing:
- 1x Overseas Super Remote Diagnosis Box V2.0 (Maintenance End)
- 1x HD15F to OBDII 16 Male Integrated Test Connector, RoHS
- 1x DB15F to HD15F Test Main Line (without DC), L=1000mm, RoHS
- 1x Double Clamp Power Cord (English, without LAUNCH), RoHS
- 1x Cigarette Lighter Cable (English, no LAUNCH), RoHS
- 4x Fuse, AC250V/5A, φ5*20mm ROHS
- 2x Fuse, AC250V/5A, φ6*30mm ROHS
- 1x X431 PAD4HD USB Type A to Type B Cable, RoHS
- 1x Category 6 Gigabit Network Cable (Blue) 15m, RoHS
- 1x SmartLinkC V2.0 Heavy Duty Truck Module Multilingual Quick Start Guide, RoHS
- 1x X431 PAD4HDB15M-For CAT-9/CAT 9PIN Integrated Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For VOLVO-8/Volvo 8PIN Integrated Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-16 Integral Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-Type II OBD-9 Integral Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-6 Integral Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For JUMPER-10 Heavy Truck Jumper 10PIN Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For IVECO-30/IVECO 30PIN Integrated Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For IVECO-38/IVECO 38PIN Integrated Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For MAN-12/Man 12PIN Integrated Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For BENZ-14/Benz 14PIN Integrated Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For MAN-37/Man 37PIN Integrated Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For RENAULT-12/Reynolds 12PIN Integrated Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For MITSUBISHI-12+16/FUSO 12+16PIN Linear Diagnostic Connector, RoHS
- 1x X431 PAD4HDB15M-For HYUNDAI-16/Hyundai Truck 16PIN Linear Diagnostic Connector, RoHS
- 4x X-431 PAD IV Electric Control Adapter Cable 1
- 4x X-431 PAD IV Electric Control Adapter Cable 2
- 4x X-431 PAD IV Electric Control Adapter Cable 3
- 4x X-431 PAD IV Electric Control Adapter Cable 4
- 4x X-431 PAD IV Electric Control Adapter Cable 5
- 4x X-431 PAD IV Electric Control Adapter Cable 6
- 4x X-431 PAD IV Electric Control Adapter Cable 7
- 4x X-431 PAD IV Electric Control Adapter Cable 8
- 4x X-431 PAD IV Electric Control Adapter Cable 9
- 1x Universal Password Envelope (without LAUNCH)

3. Components and Controls
The SmartLink C 2.0 Dongle serves as a Vehicle Communication Interface (VCI) device. Familiarize yourself with its components:
- DB-15 Diagnostic Connector: Connects the diagnostic cable.
- 3.97-inch Touchscreen: Display interface for device status and basic operations.
- DC-IN Port:
- Warning: Generally, the VCI dongle is powered via the vehicle's DLC (Data Link Connector) through the DB-15 diagnostic connector. DO NOT connect the DC-IN port to an external DC power supply if the VCI dongle is normally powered on.
- If the DLC pin is damaged or the DLC does not provide sufficient power, connect the DC-IN port to an external DC power supply.
- No responsibility is taken for damage or loss caused by not following the above method.
- LAN/WAN Port: Connects a crossover cable for firmware updates.
- Data I/O Port: Connects the VCI dongle to the diagnostic tablet for vehicle diagnosis.

4. Setup
4.1. VCI Activation & Software Download
Before first use, activate your VCI and download the heavy-duty vehicle diagnostic software to your diagnostic device. Ensure your diagnostic device is properly connected to the internet.
- Start the diagnostic app on your tablet and navigate to Profile/User Information (or similar, depending on your diagnostic device) -> Activate VCI.
- Enter the 12-digit product serial number (starting with 98) and the 8-digit activation code (found in the password envelope). Tap Activate.
- Once activated, wireless communication between your tablet and the VCI device will be established automatically.
- Navigate to the Update Center and tap Update to download and install the diagnostic software.
- After successful VCI activation, a new HD/Heavy Duty tab will appear on the main diagnostic menu screen.
- To diagnose a commercial vehicle, go to VCI/VCI-Management (or similar) and select the desired VCI serial number. Connect the VCI, diagnostic device, and the vehicle to be tested, then proceed to the diagnostic module to start a diagnostic session.


5. Operating Instructions
5.1. Connection & Diagnosis
- Ensure the vehicle ignition is OFF and the vehicle battery voltage is within 9-36 Volts.
- Locate the vehicle's DLC (Data Link Connector), typically found in the driver's cab for commercial vehicles.
- Connect the SmartLink C 2.0 to the vehicle using one of the following methods:
- For OBDII-equipped vehicles: Use the provided diagnostic cable (DB15F to HD15F data cable + OBD II adapter).
- For non-OBDII-equipped vehicles: Select the appropriate adapter based on the vehicle's DLC type. Replace the OBDII adapter with the chosen target adapter.
- Alternative Power Supply (if DLC is damaged or insufficient):
- Battery Clamp Cable: Connect one end of the battery clamp cable to the VCI's DC-IN port and the other end to the vehicle battery.
- Cigarette Lighter Cable: Connect one end of the cigarette lighter cable to the VCI's DC-IN port and the other end to the vehicle's cigarette lighter socket.
- For Wired Diagnosis: If performing vehicle diagnosis via a data cable, connect one end of the data cable to the VCI's data transfer port and the other end to the USB port of the diagnostic device.
- Turn the vehicle ignition ON. The VCI is now ready for diagnosis.



6. Maintenance
- General Care: Keep the device clean and free from dust and moisture. Avoid exposing it to extreme temperatures or direct sunlight. Protect it from drops and impacts.
- Software Updates: Regularly check for and install software updates for both the SmartLink C 2.0 firmware and the diagnostic software on your tablet via the Update Center. This ensures optimal performance and the latest vehicle coverage.
- Cable Inspection: Before each use, inspect all diagnostic cables and connectors for any signs of damage, fraying, or corrosion. Replace damaged cables immediately to prevent electrical issues or inaccurate readings.
- Storage: When not in use, store the SmartLink C 2.0 and its accessories in its original carrying case in a cool, dry place.
7. Troubleshooting
- Device Not Powering On:
- Check all power connections to the vehicle's DLC or alternative power sources (battery clamps, cigarette lighter).
- Verify the vehicle battery voltage is within the 9-36V operating range.
- Ensure the DC-IN port is correctly used according to the warnings in Section 3.
- Communication Errors:
- Verify that Bluetooth or Wi-Fi connections between the SmartLink C 2.0 and your diagnostic tablet are active and stable.
- Check the integrity of all diagnostic cables and connectors.
- Ensure the VCI has been successfully activated as per Section 4.1.
- Restart both the SmartLink C 2.0 and the diagnostic tablet.
- Software Issues (e.g., software not loading, errors during diagnosis):
- Ensure your diagnostic tablet has sufficient storage space.
- Try re-downloading and reinstalling the diagnostic software from the Update Center.
- Verify that the software version is compatible with your SmartLink C 2.0 firmware.
- VCI Activation Problems:
- Double-check the 12-digit serial number and 8-digit activation code for any typos.
- Ensure your diagnostic tablet has a stable internet connection during the activation process.
- Inaccurate or Missing Data:
- Ensure all connections are secure and free from corrosion.
- Verify that the correct vehicle make, model, and year have been selected in the diagnostic software.
- Check for any pending software updates for the module or the diagnostic software.
8. Specifications
| Feature | Specification |
|---|---|
| CPU | Dual processor Cortex-A7 + Cortex-M7 |
| Operating System | Linux |
| Display Resolution | 320 x 480 |
| Power Consumption | < 6W |
| Internal Storage | 8GB |
| Memory (RAM) | 256MB |
| Working Temperature | 0℃ ~ 50℃ (32°F ~ 122°F) |
| Working Voltage | 9V DC — 36V DC |
| Dimensions (L x W x H) | 200mm x 110mm x 47mm |
| Communication Methods | Wi-Fi, Bluetooth, Ethernet |
| Item Weight | 10kg (approx. including packaging) |
| Power (W) | 9W |
| External Testing Certification | CE |
| Bluetooth Frequency Range | 2402 - 2480 MHz |
| Wi-Fi (HT20) Frequency Range | 2412 - 2472 MHz |
| Wi-Fi (HT40) Frequency Range | 2422 - 2462 MHz |
| Bluetooth Transmit Power | 16.62 dBm EIRP |
| Wi-Fi Transmit Power | 19.29 dBm EIRP |


9. User Tips
- Compatibility is Key: Remember that the LAUNCH X431 SmartLink C 2.0 Module cannot be used as a standalone device. It requires a compatible LAUNCH diagnostic tablet from the X431 V+, X431 PRO3, or X-431 PRO3S series to function.
- Stay Updated: Regularly check for and install the latest software and firmware updates. This ensures you have the most current vehicle coverage, bug fixes, and performance enhancements.
- Secure Connections: Always ensure all cables and connectors are securely attached before starting any diagnostic procedure to prevent data loss or damage to the device or vehicle.
- Power Management: Pay attention to the power supply warnings, especially regarding the DC-IN port, to avoid damaging the device.
10. Warranty and Support
The LAUNCH X431 SmartLink C 2.0 module typically comes with a 365-day free replacement policy. For specific warranty terms, conditions, and duration, please refer to the documentation provided by your seller or contact the official LAUNCH support channel.
Technical Support: Free and timely technical support is generally available for LAUNCH products. For assistance with setup, operation, or troubleshooting, please contact your authorized dealer or LAUNCH customer service.
For further details, you may also refer to the official user manual PDF: SmartLink C V2.0 Dongle Quick Start Guide (PDF).