DOOYA DM25LE

Contents

DOOYA DM25LE Tubular Battery Motor Instruction Manual

Model: DM25LE

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your DOOYA DM25LE Tubular Battery Motor. This DC motor is designed for various applications, including electric blinds and roller shades, offering convenience and efficient control. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.

2. Product Features

  • DC Motor: Efficient and reliable direct current operation.
  • Electric Limit Switch: Allows precise setting of upper and lower travel limits.
  • Built-in Receiver: Integrated radio receiver for wireless remote control.
  • Lower Power Consumption: Designed for energy efficiency.
  • Resistance Protection Function: Enhances safety and motor lifespan.
  • Third Limit Point: Provides an additional programmable stop position.
  • Dot-move & Light-adjust Function: Enables fine-tuning of shade position and light control.

3. Package Contents

The standard package for the DOOYA DM25LE Tubular Battery Motor typically includes the following components:

  • DOOYA DM25LE Tubular Motor
  • Remote Controller (e.g., DC2700 model)
  • Easy Installing Brackets
  • End Cap / Crown and Drive Adapter
DOOYA Tubular Motor DM25LE with components

Figure 3.1: DOOYA DM25LE Tubular Motor and included components.

Remote controller DC2700

Figure 3.2: Example of a compatible remote controller, model DC2700.

4. Specifications

AttributeValue
Model NumberDM25LE
Motor TypeDC Electronic Radio Tubular Motor
Operating Voltage8V DC
Power7.0W
Current0.87A
Protection RatingIP44
Compatible Tube DiameterApprox. 38mm (Motor diameter approx. 37.2mm)
MaterialMetal (motor casing)
OriginMainland China
Package Length46 cm
Package Width6 cm
Package Height6 cm
Package Weight1.0 kg
DM25LE Motor Label with specifications

Figure 4.1: Close-up of the DM25LE motor label showing technical specifications.

Technical diagram of motor tube diameter

Figure 4.2: Diagram illustrating the motor's diameter (37.2mm) and weight per meter for the tube.

5. Setup and Installation

The DOOYA DM25LE motor is designed for easy installation into a 38mm diameter tube, suitable for various window covering applications.

5.1 Pre-Installation Checks

  • Ensure the tube for your blind or shade has an inner diameter of approximately 38mm.
  • Verify that you have all components listed in Section 3.
  • Confirm the power supply for the 8V DC motor is available and correctly rated.

5.2 Mounting the Motor

The motor can be installed using the provided easy installing brackets. Common installation types include:

  • Exterior Installation
  • Side Installation
  • Built-in Installation
  • Ceiling Installation

Follow the specific instructions provided with your blind or shade system for mounting the brackets and inserting the motor into the tube.

Newly updated easy installing brackets

Figure 5.1: Newly updated easy installing brackets for the tubular motor.

5.3 Wiring

Connect the motor to its compatible 8V DC power supply. Ensure all connections are secure and follow local electrical codes. The motor has a built-in receiver, so no external wiring for the remote control is typically needed beyond the power connection.

6. Operating Instructions

The DM25LE motor is controlled wirelessly via a compatible remote control (e.g., DC2700).

6.1 Pairing the Remote Control

Refer to the remote control's specific manual for pairing instructions. Generally, this involves a short programming sequence on the motor and remote to establish communication.

6.2 Setting Limit Positions

The motor features an electric limit switch for setting the upper and lower travel limits of your blind or shade. This prevents the shade from over-rolling or under-rolling.

  • Upper Limit: Use the remote to drive the shade to the desired uppermost position. Follow the remote's programming instructions to save this as the upper limit.
  • Lower Limit: Drive the shade to the desired lowermost position. Follow the remote's programming instructions to save this as the lower limit.
  • Third Limit Point: This motor also supports a third intermediate stop position. Consult your remote's manual for programming this feature.

6.3 Basic Operation

  • Up/Open: Press the 'Up' button on the remote to raise the shade.
  • Down/Close: Press the 'Down' button on the remote to lower the shade.
  • Stop/Pause: Press the 'Stop' button (often a central button) to halt the shade at any desired position.
  • Dot-move & Light-adjust: Use specific buttons or sequences on your remote for precise incremental movements or to adjust slat angles for light control, if applicable to your shade type.

7. Maintenance

The DOOYA DM25LE Tubular Battery Motor is designed for low maintenance. However, regular checks can ensure optimal performance.

  • Cleaning: Keep the motor and surrounding area free from dust and debris. Use a soft, dry cloth for cleaning. Do not use abrasive cleaners or solvents.
  • Battery Check (if applicable): If your power supply includes a battery, ensure it is charged and functioning correctly according to its own manual.
  • Limit Settings: Periodically check that the upper and lower limit settings are accurate and adjust if necessary.
  • Connections: Ensure all power connections remain secure.

Do not attempt to open the motor casing, as this may void the warranty and could lead to electric shock or damage.

8. Troubleshooting

If you encounter issues with your DOOYA DM25LE motor, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Motor does not respond to remote.Remote battery low/dead; Remote not paired; Power supply issue.Replace remote battery; Re-pair remote (refer to remote manual); Check power connection to motor.
Shade stops at incorrect positions.Limit settings are incorrect.Re-program the upper, lower, and third limit points as per remote control instructions.
Motor makes unusual noise.Obstruction in the tube or shade mechanism; Motor mounting issue.Inspect for obstructions; Ensure motor is securely mounted and aligned within the tube.
Motor runs intermittently.Loose wiring; Power supply instability.Check all power connections; Ensure stable power supply.

If the problem persists after attempting these solutions, please contact customer support.

9. User Tips

  • Power Supply: While the motor operates on 8V DC, ensure your power adapter is compatible with your local mains voltage (e.g., 110V or 220V AC input) to provide the correct 8V DC output to the motor.
  • Tube Compatibility: The motor is designed for a 38mm diameter tube. Using an incorrect tube size may lead to improper function or damage.
  • Remote Control Options: Consider if a wall-mounted remote control (if available from DOOYA) would be more convenient for your setup than a handheld remote.
  • Shade Size: For larger shades, such as those around 2.5 meters in width, ensure the motor's torque (0.7Nm as seen on some labels) is sufficient for the weight of your specific blind material.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please refer to the documentation provided at the time of purchase or contact your retailer. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.