Sunsun HJ-111b, HJ-311b, HJ-411b, HJ-611b

Contents

Sunsun Aquarium Fish Tank Multi-Functional Internal Water Pump Filter User Manual

Models: HJ-111b, HJ-311b, HJ-411b, HJ-611b

1. Product Overview

The Sunsun Multi-Functional Internal Water Pump Filter is designed for use in aquariums and reptile tanks, providing essential water circulation, filtration, and aeration. This versatile unit can be installed vertically for fish tanks or horizontally for reptile tanks, offering flexibility for various aquatic environments. It is available in several models, including HJ-111b, HJ-311b, HJ-411b, and HJ-611b, each with varying power and flow rates to suit different tank sizes.

Sunsun HJ-311B internal filter operating in an aquarium
Figure 1: Sunsun HJ-311B internal filter operating in an aquarium.

2. Safety Instructions

  • Always disconnect the power supply before performing any maintenance or cleaning.
  • Ensure the filter is fully submerged in water during operation to prevent damage to the motor.
  • Do not operate the pump if the power cord or plug is damaged.
  • This appliance is for indoor use only and should not be used in environments where it may be exposed to extreme temperatures or direct sunlight.
  • Keep out of reach of children.
  • Ensure the voltage rating of the filter matches your local power supply (110V or 220-240V, depending on model).

3. Package Contents

Upon opening the package, please verify that all components are present and undamaged:

  • Internal Water Pump Filter Unit
  • Spray Bar
  • Air Tube
  • Nozzles/Connectors (various sizes)
  • Suction Cups for mounting
  • Filter Media (e.g., sponge)
  • User Manual (this document)
Sunsun HJ-111B internal filter with its packaging and accessories
Figure 2: Sunsun HJ-111B internal filter with its packaging and accessories.

4. Specifications

Specifications vary by model. Please check the label on your specific unit for precise details.

FeatureDetail
BrandSunsun
TypeAquarium Internal Filter / Water Pump
MaterialPlastic
Voltage110V or 220-240V (model dependent)
High-concerned chemicalNone
Package Dimensions (approx.)18cm (L) x 12cm (W) x 5cm (H)
Package Weight (approx.)0.3 kg

Model-Specific Specifications:

ModelVoltagePower (W)Flow Rate (L/H)
HJ-111B220-240V2W300L/H
HJ-311B220-240V20W300L/H
HJ-411B(Check unit label)(Check unit label)(Check unit label)
HJ-611B(Check unit label)(Check unit label)(Check unit label)
Close-up of Sunsun HJ-311B internal filter showing specifications
Figure 3: Close-up of Sunsun HJ-311B internal filter showing specifications (example for HJ-311B).

5. Setup Instructions

  1. Unpack and Inspect: Carefully remove all components from the packaging. Inspect for any damage.
  2. Assemble Components:
    • Attach the spray bar to the filter's outlet nozzle.
    • If using for aeration, connect the air tube to the designated air intake port (if available on your model).
    • Select the appropriate nozzle/connector for your desired outflow (e.g., for connecting a hose). Refer to Figure 6 for examples of hose connections.
  3. Mounting:
    • Attach the suction cups to the filter unit.
    • For Fish Tanks (Vertical Installation): Position the filter vertically inside the aquarium, ensuring the entire unit is submerged and the water outlet is above or at the water surface for optimal circulation and aeration. Press the suction cups firmly against the tank wall to secure.
    • For Reptile Tanks (Horizontal Installation): For shallow water environments, the filter can be placed horizontally. Ensure the water inlet is fully submerged and the outlet is positioned to create desired water movement.
  4. Water Level: Ensure the water level in your tank is sufficient to fully submerge the filter unit. Operating the pump dry will cause damage.
  5. Connect to Power: Once the filter is securely installed and fully submerged, plug the power cord into a suitable electrical outlet.
Vertical installation of the filter in a fish tank
Figure 4: Vertical installation for fish tanks.
Horizontal installation of the filter in a reptile tank
Figure 5: Horizontal installation for reptile tanks.
Diagram illustrating different hose connections (5mm/8mm and 9mm/12mm) for the filter
Figure 6: Examples of hose connections for the filter (Inner Diameter: 5mm, Outer Diameter: 8mm; Inner Diameter: 9mm, Outer Diameter: 12mm).

6. Operating Instructions

  • Once plugged in, the filter will immediately begin to operate, circulating and filtering the water.
  • Ensure the water flow is consistent and that the spray bar (if used) is creating adequate surface agitation for oxygen exchange.
  • Monitor the water level regularly to ensure the filter remains fully submerged.

7. Maintenance

Regular maintenance is crucial for the longevity and efficient operation of your filter. Perform these steps at least once a month, or more frequently if water clarity decreases:

  1. Disconnect Power: Always unplug the filter from the electrical outlet before handling.
  2. Remove from Tank: Carefully remove the filter unit from the aquarium.
  3. Disassemble: Open the filter casing to access the impeller and filter media.
  4. Clean Impeller: Remove the impeller and clean it thoroughly with a small brush under running water. Ensure no debris is lodged in the impeller well.
  5. Clean Filter Media:
    • Rinse the filter sponge in old aquarium water (from a water change) to preserve beneficial bacteria. Do not use tap water directly, as chlorine can kill these bacteria.
    • If your model uses activated carbon or other chemical media, replace it as recommended by the media manufacturer (typically every 2-4 weeks). The Q&A suggests changing sponge and charcoal for model 311B.
  6. Clean Casing: Rinse the filter casing and spray bar with clean water to remove any accumulated sludge or algae.
  7. Reassemble and Reinstall: Reassemble the filter, ensuring all parts are correctly fitted. Reinstall the filter in the tank and plug it back in.

8. Troubleshooting

ProblemPossible CauseSolution
Filter not starting/no powerNot plugged in; power outage; faulty outlet; damaged cord/plug.Check power connection; test outlet with another device; inspect cord for damage (do not use if damaged).
Low water flow or no flowClogged filter media; blocked impeller; low water level; air in pump.Clean filter media and impeller (see Maintenance); ensure filter is fully submerged; gently shake filter to release trapped air.
Unusual noise or vibrationImpeller obstructed by debris; impeller not seated correctly; air trapped in pump.Disconnect power, remove and clean impeller, ensure it's correctly seated; gently shake filter to release air.

9. User Tips

  • Model Differences: Users often inquire about the differences between models like HJ-411B and HJ-611B. Always refer to the product label or detailed specifications provided by the seller for precise power, flow rate, and recommended tank size for your specific model.
  • Filter Media Replacement: For models like the HJ-311B, the sponge and any activated carbon should be changed regularly. Sponges can be rinsed during weekly water changes, but activated carbon typically needs replacement every 2-4 weeks to remain effective.
  • Placement: For optimal filtration and aeration, ensure the filter is placed in a location that allows for good water circulation throughout the tank.

10. Warranty and Support

For warranty information, please refer to the terms and conditions provided by your retailer or the manufacturer at the time of purchase. If you encounter any issues not covered in this manual or require further assistance, please contact your retailer or the Sunsun customer support directly.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.