1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Steelmate 986E 1-Way Motorcycle Alarm System. This system is designed to enhance the security of your motorcycle with features such as remote engine start, engine immobilization, and anti-hijacking capabilities, all controlled via a durable, waterproof mini transmitter.

2. Product Overview
2.1. Components
The Steelmate 986E system typically includes the following components:
- 2 x Transmitters (Remote Controls)
- 1 x ECU (Electronic Control Unit)
- 1 x Alarm Speaker (Siren)
- 1 x Set Installation Accessory (Wiring harness, fuses, etc.)
- 1 x English User Manual (PDF version available for download)



2.2. Key Features
- Durable and waterproof transmitters.
- Waterproof ECU for enhanced reliability.
- Remote engine start and keyless driving functionality.
- 4-button transmitters for comprehensive control.
- Adjustable shock sensor sensitivity via transmitter.
- Anti-hijacking protection.
- Engine immobilization for theft prevention.
3. Specifications
| Attribute | Value |
|---|---|
| Model Name | 986E |
| Item Type | Theft Protection |
| Material | Metal & Plastic |
| Voltage | 9~16V |
| Static Current | <3.5mA |
| Siren SPL | 105dB~125dB |
| Frequency Range | 433.92MHz |
| Item Weight | 357g |
| Item Length | 15cm |
| Item Width | 12cm |
| Item Height | 6cm |
| Origin | Mainland China |
4. Setup and Installation
Installation of the Steelmate 986E Motorcycle Alarm System requires technical knowledge and should ideally be performed by a qualified professional. Incorrect installation can lead to system malfunction or damage to your motorcycle's electrical system.
4.1. General Guidelines
- Ensure the motorcycle's power is disconnected before beginning installation.
- Mount the ECU in a secure, hidden, and dry location.
- Mount the siren in a location where its sound will not be obstructed.
- Route all wiring carefully to avoid pinching, abrasion, or exposure to excessive heat or moisture.
- Connect the wiring harness according to the detailed wiring diagram provided in the full user manual.
- WARNING: DO NOT IMMERSE IN WATER! Ensure all connections are properly sealed and protected from water ingress.
For a comprehensive wiring diagram and step-by-step installation instructions, please refer to the official user manual PDF: Steelmate 986E User Manual (PDF).
5. Operating Instructions
The Steelmate 986E system is controlled via its 4-button transmitter. Familiarize yourself with the buttons and their functions:

5.1. Basic Functions
- Arm Button (Lock Icon): Press to arm the alarm system. The motorcycle will be secured.
- Disarm Button (Unlock Icon): Press to disarm the alarm system.
- Engine Start Button (Lightning Bolt Icon):
- Press this button twice to remotely start the engine.
- The engine will run for a programmed duration of 8 minutes and then stop automatically.
- If the ignition key is turned to the ON position during this programmed duration, the engine will continue to run.

Figure 6: Remote Engine Start in action. - Locating Button (Bell Icon): Press to locate your motorcycle (e.g., by sounding the horn or flashing lights).
5.2. Advanced Features
- Keyless Driving: Once the system is disarmed, you can start and drive your motorcycle without using the physical key, depending on the installation configuration.
- Adjustable Shock Sensor Sensitivity: The sensitivity of the shock sensor can be adjusted via the transmitter to suit your preference and environment, reducing false alarms.
- Anti-Hijacking: If the system detects an attempt to start the motorcycle via ignition while armed, the siren will chirp for 30 seconds, turn signals will flash, and the engine will be immobilized to prevent theft.

Figure 7: Anti-Hijacking protection. - Engine Immobilization: This feature prevents the engine from starting when the alarm system is armed, providing an additional layer of security.
6. Maintenance
- Water Protection: While the ECU and transmitters are waterproof, avoid immersing them in water. Ensure all components are kept as dry as possible.
- Battery Replacement: Replace transmitter batteries as needed to ensure reliable operation. Refer to the full manual for battery type and replacement instructions.
- Cleaning: Clean the components with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Regular Checks: Periodically check all wiring connections for security and signs of wear or corrosion.
7. Troubleshooting
If you encounter issues with your Steelmate 986E alarm system, consider the following basic troubleshooting steps:
- System Not Responding: Check the transmitter battery. Ensure the motorcycle's battery is charged and connections are secure.
- False Alarms: Adjust the shock sensor sensitivity via the transmitter. Ensure the ECU is mounted securely and not subject to excessive vibrations.
- Remote Start Failure: Verify the motorcycle's ignition is off. Check for any error codes if your motorcycle has a diagnostic system.
- Siren Not Sounding: Check the siren's wiring connection and ensure it is not damaged.
For more complex issues, it is recommended to consult a professional installer or contact customer support. Refer to the full user manual PDF for detailed troubleshooting guides.
8. User Tips
Based on common user experiences, here are some tips for optimal use:
- Transmitter Care: Keep your transmitters away from extreme temperatures and strong magnetic fields to prolong their lifespan.
- Shock Sensor Adjustment: Experiment with the shock sensor sensitivity settings to find the balance that protects your motorcycle without triggering false alarms from minor disturbances.
- Professional Installation: For peace of mind and to ensure all features function correctly, consider professional installation, especially if you are not experienced with motorcycle electrical systems.
9. Warranty and Support
9.1. Warranty Information
The Steelmate 986E Motorcycle Alarm System comes with a 12-month manufacturer's limited warranty for defective items, excluding items damaged or misused after receipt. Accessories are covered by a 3-month warranty.
To claim warranty service, defective items must be reported and returned within the warranty period, preferably in their original packaging. You will need to provide details of the defect and your order number. Warranty claims for items damaged or misused, or those with an expired warranty, will not be honored.
9.2. Manufacturer and Support Contact
For technical support, warranty claims, or further inquiries, please contact the manufacturer or their authorized representative:
Manufacturer:
- Company Name: Dongguan Yugao Sporting Goods Co., Ltd.
- Email: b55sumaitn2608@163.com
- Telephone: 86-18976659008
EU Authorized Representative:
- Company Name: SOLIDAUTHORITYLIMITED
- Email: phoebe8706@gmail.com
- Telephone: 33-761441379
For the most detailed information, always refer to the complete user manual PDF: Steelmate 986E User Manual (PDF).