DT-6507 Green LED Alarm Clock Instruction Manual

1. Introduction

The DT-6507 Green LED Alarm Clock is a stylish and functional addition to any home or office. Featuring a sleek mirror design, this electronic clock not only displays the time but also shows the date and temperature. It operates on 3 AAA batteries (not included) or can be powered via a USB cable, making it versatile for any setting. The clock has an automatic brightness adjustment feature for nighttime use, ensuring it won't disturb your sleep. With large, easy-to-read green digits, it's perfect for anyone who values both aesthetics and functionality. Ideal for makeup application or as a bedside clock, it also includes a snooze function and memory settings to retain your time even during power outages. Upgrade your space with this modern clock that combines style and practicality.

For a visual overview of the product, please refer to the images below:

Figure 1: Front view of the DT-6507 Green LED Alarm Clock displaying 12:06.

2. Safety & Warnings

• This product is intended for adult use only.
• Keep out of reach of children and pets to prevent accidental injury or ingestion of small parts.
• Ensure correct installation of batteries and USB cable.
• If you notice any abnormal noise or equipment error after installation, discontinue use immediately.
• Follow all instructions for proper use; misuse may cause harm or damage to the device.
• Store the product in a dry and shady place, away from high temperatures, humidity, and direct sunlight to prolong its lifespan.

3. Product Overview

Package Contents:

• 1x Curved Electronic Clock

Note: AAA batteries are not included.

Key Features:

• Sleek mirror design
• Time, date, and temperature display
• Automatic brightness adjustment for nighttime
• Large, easy-to-read green LED digits
• Snooze function (default 5 minutes)
• Memory settings (retains time during power outages when batteries are installed)
• Dual power options: 3x AAA batteries (not included) or USB cable (included)

Figure 2: Angled view of the DT-6507 Green LED Alarm Clock showing control buttons (MODE, ALARM, SNZ/LIGHT, UP, DOWN) and displaying 17:07.

4. Setup

4.1 Powering the Device

The DT-6507 alarm clock can be powered in two ways:

1. USB Power: Connect the provided USB cable to the clock and a compatible USB power adapter (not included) or a USB port on a computer. This is the primary power source for continuous operation.
2. Battery Backup: Insert 3 AAA batteries (not included) into the battery compartment. These batteries serve as a backup to maintain time and settings during a power outage. The clock will not display continuously on battery power alone to conserve energy.

4.2 Initial Placement

Place the clock on a stable, flat surface. Its sleek mirror design makes it suitable for a bedside table, desk, or vanity. Ensure it is away from direct heat sources or excessive moisture.

Figure 3: The DT-6507 Green LED Alarm Clock on a bedside table, displaying 12:00.

5. Operating Instructions

The clock features several buttons for control: MODE, ALARM, SNZ/LIGHT, UP, and DOWN.

Figure 4: Detailed view of clock features including brightness, temperature, and snooze.

5.1 Setting Time and Date

1. Press the MODE button repeatedly to cycle through Time, Date, and Temperature display modes.
2. When in Time display mode, press and hold the MODE button to enter time setting. The hour digits will flash.
3. Use the UP and DOWN buttons to adjust the hour.
4. Press MODE again to move to minute setting, then use UP and DOWN to adjust.
5. Continue pressing MODE to set the year, month, and day in the same manner.
6. Press MODE one last time or wait a few seconds for the settings to save automatically.

5.2 Setting the Alarm

1. Press the ALARM button once to view the current alarm time.
2. Press and hold the ALARM button to enter alarm setting. The hour digits will flash.
3. Use the UP and DOWN buttons to adjust the alarm hour.
4. Press ALARM again to move to minute setting, then use UP and DOWN to adjust.
5. Press ALARM one last time or wait a few seconds for the alarm setting to save.
6. To activate/deactivate the alarm, press the ALARM button briefly when not in setting mode. An alarm icon will appear/disappear on the display.

5.3 Snooze Function

• When the alarm sounds, press the SNZ/LIGHT button to activate the snooze function. The alarm will pause for 5 minutes (default interval) and then sound again.
• To stop the alarm completely, press any other button (e.g., MODE, ALARM, UP, DOWN).

5.4 Brightness Adjustment

The clock features an automatic brightness adjustment for nighttime use. To manually adjust brightness:

• Press the SNZ/LIGHT button briefly when the alarm is not sounding. This will cycle through different brightness levels (e.g., bright, dim, off).

5.5 Temperature Display

• Press the MODE button to switch to the temperature display.
• To switch between Celsius (°C) and Fahrenheit (°F), press the DOWN button while in temperature display mode.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the mirror surface and body of the clock. Do not use abrasive cleaners or solvents, as they may damage the finish.
• Storage: When not in use for an extended period, remove the AAA batteries to prevent leakage. Store the clock in a dry, cool place away from direct sunlight.
• Battery Replacement: Replace AAA batteries when the display becomes dim or the memory function fails during power outages.

7. Troubleshooting

Common Issues and Solutions:

Display is blank or dim:

Ensure the USB cable is securely connected to a power source. If using battery backup, check if the AAA batteries are inserted correctly and are not depleted. Replace batteries if necessary. Adjust brightness using the SNZ/LIGHT button.

Alarm does not sound:

Verify that the alarm is activated (alarm icon visible on display). Check that the alarm time is set correctly. Ensure the volume is not set to zero (if applicable, though this model typically has a fixed alarm sound).

Time/settings reset after power outage:

Ensure 3 AAA batteries are installed in the battery compartment. These batteries provide backup power for memory retention during main power interruptions.

Incorrect temperature reading:

Ensure the clock is not placed near heat sources or in direct sunlight, which can affect sensor accuracy. Press the DOWN button to switch between Celsius and Fahrenheit if needed.

8. Specifications

9. User Tips

Based on general user feedback for similar products, here are some tips for optimal use:

• For continuous display and full functionality, always use the USB power cable. Batteries are primarily for backup.
• When setting the time or alarm, be patient and allow a few seconds for the settings to save after making adjustments.
• The mirror surface can be prone to fingerprints; regular gentle cleaning with a microfiber cloth will keep it looking new.

10. Warranty & Support

Manufacturer Information:

Taiyuan shunteji electronic commerce co., ltd
Unit 1, Building B, Building 4, Left Bank of Evergrande Riverside, No.96 Wenxing Road, Wanbailin District, Taiyuan City, Shanxi Province 2505 Code: 030000
Email: sanbaijiu390@163.com
Phone: +86 15360940440

EU Authorized Representative:

E-CrossStu GmbH
Felix-Dahn-Str 4
Email: E-CrossStu@web.de
Phone: +49 71191222069

For further assistance or inquiries, please contact the manufacturer or the EU authorized representative directly.

A PDF version of this user manual is available for download here.