12.3" Virtual Cockpit Speedometer for Audi Q5 (2010-2018) User Manual

1. Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your 12.3-inch Virtual Cockpit Speedometer for Audi Q5 models manufactured between 2010 and 2018. This digital instrument cluster is designed to enhance your driving experience with a high-resolution display, advanced features, and seamless integration with your vehicle's existing systems.

The device runs on a Linux system with near zero cache, ensuring quick and smooth performance. It supports original car functions, offers multiple UI styles, and includes built-in wireless CarPlay and Android Auto mirroring.

2. Safety Information

• Professional installation is highly recommended to ensure correct wiring and functionality.
• Ensure the vehicle's power is completely off before beginning any installation or wiring work.
• Do not attempt to disassemble or modify the device, as this may void the warranty and cause damage.
• Keep the device away from water, moisture, and extreme temperatures.
• Always prioritize safe driving. Do not operate settings or features that distract you from the road.

3. Specifications

4. Setup and Installation

This digital instrument cluster is designed for plug-and-play installation using ISO cables. However, professional installation is recommended.

4.1. Pre-Installation Settings

• Speed Limit and Winter Tires: Set the speed limit and turn off winter tire settings in your original car system.
• Speed Limit Alarm: Set the speed limit alarm to 250 km/h.
• Original Buzzer: If your original car's motherboard has a buzzer, ensure it is retained. Otherwise, alarm sounds and other functions may not work.
• Small Motherboard: Keep the original car motherboard's small motherboard as shown in the diagram if your old cluster includes it.

Image Description: This image illustrates the importance of preserving OEM features, including the original car's small motherboard, to ensure proper functioning and bypass security systems.

4.2. HDMI Connection (Optional)

The digital cluster includes an HDMI connection on its motherboard. If you wish to use the HDMI sync display function from an Android radio player to the digital cluster, you will need an additional HDMI cable and an HDMI exchange box (available separately from the seller).

1. Connect the HDMI output from the digital cluster to the HDMI cable.
2. Connect the HDMI cable to the HDMI exchange box.
3. Connect the HDMI exchange box to the USB port of your Android player.
4. Once connected, open the digital cluster and navigate to the navigation interface. Press the down button to activate the function.

Note: The HDMI sync function requires the radio to be an Android player with video output. It will not work with original or Linux system radios from the car.

Image Description: A visual guide demonstrating how to connect the HDMI cable and exchange box between the digital cluster and an Android player for sync display functionality.

Image Description: Two different types of HDMI cables and their corresponding exchange boxes are shown. The specific type shipped depends on the car model.

5. Operating Instructions

After successful installation, the digital cluster will start up quickly (approximately 2 seconds) when you turn on the engine. You can then customize various settings and utilize its features.

5.1. General Features

• Quick Start: Linux system ensures fast boot-up without delay.
• OEM Feature Preservation: Keeps every factory function intact, including accurate mileage (odometer), VIN, service indicators, and all vehicle-specific settings and warnings.
• Rich UI Personal Style: Multiple cool UI options and themes are available to switch freely.
• HD Display: 1920*720 resolution provides vibrant and true-to-life colors.
• Built-in Wireless CarPlay & Android Auto: Safely access iPhone/Android navigation, communication, and entertainment features.
• Optional Camera Support: Supports Rear Cam, DVR, and 360° Cam (requires optional HDMI cable + exchange box).

Image Description: A visual summary of the digital cluster's key features, including Wireless Carplay, Linux System, Cool Theme Style, Original Car Data Retention, Sync Display, Safer Driving, 1080*720 LCD HD display, Multi-language translation, and Rich Option Settings.

5.2. Settings Menu Navigation

Access the settings menu to customize your digital cluster. The menu structure is intuitive, allowing you to personalize various aspects of the display and functionality.

Image Description: A screenshot displaying various UI settings available on the digital cluster, including UI Selection, Preference Set, Theme Switching, Style, Physical Light Set, Trip Set, System Preference, Language, and Unit Display.

5.2.1. Fuel Tank Set

If the fuel tank level displayed is inaccurate, first fill the tank completely. Then, access the settings to calibrate the fuel level. Remember the full tank value and input it into the system.

5.2.2. Car Type Set

Go to Settings > Car Type, and select your specific car model. After selection, turn off the engine, cut power, lock the car, and wait for 5 minutes before restarting. The system will then be configured for your car.

5.2.3. Speed Calibration

In Dashboard Settings > Calibration Settings > Speed, enter the difference between the displayed speed and the actual speed to calibrate the average speed value.

5.2.4. Consumption Set

In Dashboard Settings > Calibration Settings > Consumption, change the setting to manual. Then, enter the difference between the displayed consumption and the actual consumption to calibrate the average consumption value.

5.2.5. Preference Set

This section includes various small settings to personalize your experience:

• Voltage display frequency
• Reverse left and right
• Width indicator light
• Move up and down / left and right
• Zoom ratio
• Time Source
• Race mode
• Boot Sound
• Tire pressure
• Check MIL
• Phone mirror
• OBD Silence

5.2.6. Unit Set

Configure units for various measurements:

• Distance (km, mi)
• Vehicle Speed (km/h, mph)
• Volume (L, Gallon US/UK)
• Consumption (L/100km, km/L, MPG US/UK)

5.2.7. Language Set

Go to Settings > Language Settings. The system supports 14 different languages.

Image Description: A screenshot showing the multi-language support feature, with various national flags indicating available languages for the digital cluster interface.

5.2.8. LHD/RHD Configuration

If your vehicle is Right-Hand Drive (RHD), go to the configuration settings and set it to LHD or RHD accordingly.

5.2.9. CarPlay Connect

Access the "CarPlay" option. Once connected, press down to reveal a menu allowing you to adjust the region or switch devices. Adjusting the region changes the interface display zone, while switching devices allows you to toggle between CarPlay, AirPlay, Android Auto, or HiCar. If you have an Android phone, select Android Auto to connect directly via Bluetooth.

5.2.10. Trip Set

Go to the travel data menu. Press OK to reset the trip data.

5.2.11. Theme Set

Go to Settings > Theme. Enter the Interior menu and select your desired theme (e.g., A8 or A7). Press OK to apply.

5.2.12. Physical Light Set

Normally, the "physical light" should be closed. It is not necessary to turn it on unless your car model specifically requires it and the physical light is present in the digital cluster.

5.2.13. Radio Display Zone Set

In Settings > Preference > Zoom Radio, you can adjust the radio display zone from 1.0 to 0.** as desired.

6. Maintenance

• Cleaning: Use a soft, dry cloth to clean the screen and exterior of the unit. Avoid abrasive cleaners or solvents.
• Software Updates: The system supports updates via the USB port. Periodically check the manufacturer's website or contact support for available firmware updates to ensure optimal performance and access to new features.
• Environmental Conditions: Operate the device within recommended temperature and humidity ranges to prolong its lifespan.

7. Troubleshooting

• No Power/Display: Check all power connections and ensure the vehicle's ignition is on. Verify that the original car motherboard is correctly connected.
• Alarm Sounds/Functions Not Working: Confirm that the original car motherboard buzzer was retained during installation, if applicable.
• Inaccurate Readings (Speed/Fuel): Perform the respective calibration steps (Speed Calibration, Fuel Tank Set, Consumption Set) as described in the Operating Instructions.
• HDMI Sync Display Not Working: Ensure your radio is an Android player with video output functionality. The HDMI sync will not work with original or Linux car radios. Verify all HDMI cable connections.
• System Lag/Unresponsiveness: Try restarting the vehicle. Ensure the system software is up to date.
• Language Issues: Check the Language Set menu to ensure the desired language is selected.

8. User Tips

• Take advantage of the multiple UI themes to personalize your dashboard to your preference.
• For optimal performance, ensure your system software is updated regularly via the USB port.
• Always perform the initial calibration steps (fuel tank, speed, consumption) accurately after installation for precise readings.

9. Warranty and Support

The product comes with a 2-year warranty period. In case of quality problems, a 90-day free return and refund policy is offered. If the product is broken upon receipt, please refuse to sign for the parcel and return it to the overseas warehouse.

For any questions or installation assistance, please contact the seller. An engineering team is available to provide support.