bowAI OB8S Max 3-in-1 Intelligent Sweeping Robot User Manual

1. Important Safety Information

Please read all safety instructions carefully before using the Intelligent Sweeping Robot. Keep this manual for future reference.

Battery Safety

• **Caution:** Battery leakage exudate can cause human injury. If the battery leaks, ensure the exudate does not come into contact with your eyes or skin.
• In case of contact, immediately wash hands and eyes with clean water. If you still feel unwell, seek medical advice.
• Charging at a voltage above 5V is prohibited. Use only the provided charging cable and a compatible power adapter.
• If the product is not in use for an extended period, turn off the bottom switch to prevent continuous power consumption.

2. Product Overview

The bowAI OB8S Max is an intelligent 3-in-1 sweeping, vacuuming, and mopping robot designed for home and office use. It features APP intelligent planning, anti-drop, and obstacle avoidance capabilities.

Product Features

• 3-in-1 Functionality: Sweeping, Vacuuming, and Mopping.
• 135ml Large Water Tank for effective wet mopping.
• Multiple Cleaning Modes: Free Cleaning, Scheduled Cleaning, Edge Cleaning, Bow Sweep.
• Intelligent Anti-Drop and Sensitive Obstacle Avoidance.
• APP Intelligent Control for remote operation and scheduling.
• 6.8cm Slim Body design to clean under furniture.
• 2000Pa Super Suction for thorough dust removal.
• 510ML Sealed Dust Box, easy to clean weekly.
• Low Noise Operation: Below 70dB.
• Long-lasting 3000mAh Lithium Battery with approximately 80 minutes of runtime.

Image: bowAI OB8S Max Robot Vacuum Cleaner highlighting its 3-in-1 functionality and APP control.

3. Package Contents

Ensure all items are present in the package:

Image: Visual representation of the product components included in the package.

4. Setup Guide

4.1 Initial Charging

Upon receiving the product, it is recommended to fully charge the robot for approximately 5 hours before its first use. Connect the USB cable to the robot and a compatible power adapter (ensure voltage is not above 5V).

The indicator light will be red during charging and turn off when fully charged.

4.2 Installing the Mopping Cloth and Water Tank

1. Paste the mopping cloth onto the bottom of the external water tank.
2. Open the water inlet cover of the water tank and fill it with clean water. Close the cover tightly.
3. Align the column of the water tank with the corresponding hole on the robot's bottom and press it down firmly for installation.

Image: Steps for attaching the mopping cloth and filling the water tank.

Image: The external water tank for wet mopping.

4.3 APP Download and Connection

1. Scan the QR code provided in the manual (or on the product packaging) with your mobile phone to download and install the product APP.
2. Ensure the sweeping robot's master switch (located at the bottom) is in the 'ON' position.
3. Open the APP on your phone. If prompted, allow Bluetooth access.
4. In the APP, select the cleaning robot from the list of available devices and click to connect.

Image: Mobile APP interface for controlling the robot.

Image: Overview of APP control features including scheduling, mode switching, and status monitoring.

5. Operating Instructions

5.1 Power On/Off

• **To Power On:** Press the power switch on the robot's top panel or use the APP to start.
• **To Power Off:** Press and hold the power switch, or turn off the master switch at the bottom of the robot.

5.2 Cleaning Modes

The robot offers various cleaning modes to suit different needs:

• **Free Cleaning:** Whole house cleaning without specific path planning.
• **Scheduled Cleaning:** Set specific times for the robot to start cleaning automatically via the APP.
• **Edge Cleaning:** The robot focuses on cleaning along walls and furniture edges.
• **Bow Sweep:** The robot follows a systematic bow-shaped path for efficient and thorough cleaning.

Image: Illustration of the robot's various cleaning modes.

5.3 APP Control

Use the dedicated mobile APP to control the robot remotely. Features include:

• Start/Stop cleaning.
• Select cleaning modes.
• Set cleaning schedules.
• Monitor robot status.
• Manual directional control.

5.4 Navigation and Safety

• **Intelligent Anti-Collision:** The robot is sensitive to various environments and will reverse direction upon encountering obstacles.
• **Smart Anti-Drop:** Equipped with 3 sets of anti-drop sensors at the bottom to detect height differences and prevent falls.
• **Obstacle Climbing:** Features rear-drive large wheels, allowing it to easily climb 15° obstacles and navigate different floor types (carpet, floor, brick).

Image: Robot demonstrating intelligent anti-collision by reversing direction.

Image: Robot demonstrating its ability to overcome 1.8cm obstacles.

6. Maintenance

6.1 Dust Box Cleaning

The 510ML sealed dust box is designed for easy cleaning once a week. Regular cleaning ensures optimal suction performance.

1. Open the magnetic cover on the robot.
2. Raise and remove the dust box.
3. Open the dust box to empty accumulated garbage.
4. Clean the fine filter and re-install the dust box into the robot.

Image: Diagram of the 510ML sealed dust box and its components for cleaning.

6.2 Mopping Cloth and Water Tank

• After each mopping session, remove and clean the mopping cloth.
• Empty any remaining water from the water tank and rinse it. Allow both to air dry before re-assembly or storage.

6.3 Brushes and Sensors

• Regularly check the side brushes for tangled hair or debris and clean them as needed.
• Wipe the anti-drop sensors and other optical sensors with a soft, dry cloth to ensure proper function.

7. Troubleshooting

If you encounter any issues with your bowAI OB8S Max robot, please refer to the following common problems and solutions:

• **Robot does not turn on:** Ensure the master switch at the bottom is ON and the battery is charged.
• **Robot stops unexpectedly:** The battery might be low. Charge the robot. If the issue persists, check for obstructions or errors indicated by the robot's lights.
• **Poor cleaning performance:** Clean the dust box, filter, and brushes. Ensure the water tank is filled for mopping.
• **Robot gets stuck frequently:** Clear obstacles from the cleaning path. Ensure the robot's sensors are clean.
• **APP connection issues:** Ensure Bluetooth is enabled on your phone and the robot is powered on. Try restarting both the APP and the robot.

For persistent issues, please contact customer support.

8. Specifications

Image: Product packaging showing dimensions (33cm x 13cm x 32cm).

9. User Tips

• **First Use:** Always fully charge the robot for 5 hours before the very first use to optimize battery life.
• **Power Management:** If you plan not to use the robot for an extended period, remember to turn off the master switch at the bottom to prevent battery drain.
• **Charging Station:** The robot is designed to return to its charging station automatically when the battery is low. Ensure the charging station is placed in an accessible area.
• **Optimal Mopping:** For best mopping results, ensure the water tank is adequately filled and the mopping cloth is clean.

10. Warranty and Support

This product has been inspected to meet stipulated quality standards. For detailed warranty information, please refer to the terms and conditions provided at the time of purchase.

For technical support, troubleshooting assistance, or to inquire about replacement parts, please contact your retailer or the manufacturer's customer service.

A user manual in PDF format is available for download: View User Manual (PDF)