Dreamcolor Acrylic Interior Car LED Strip Light

Introduction

This manual provides instructions for the installation, operation, and maintenance of your Dreamcolor Acrylic Interior Car LED Strip Light (18-in-1 Symphony Series). This kit is designed to enhance your vehicle's interior with dynamic, customizable ambient lighting, featuring RGBIC technology and app control.

Package Contents

The complete 18-in-1 upgrade kit includes the following components:

• 4 x Starry Sky Acrylic LED Door Light Strips (with integrated clips for recessed installation)
• 1 x Main Dashboard LED Light Strip
• 1 x Secondary Dashboard LED Light Strip
• 4 x Footwell Lights (Under-seat lighting)
• 4 x Interior Door Handle Lights
• 4 x Door Storage Pocket/Cupholder Lights
• 1 x Central Controller Module (with QR code for app download)
• 4 x Sub-Control Modules (for wireless multi-zone door communication)
• Complete plug-and-play power harness
• Cable ties
• Adhesive pads

Technical Specifications

Setup and Installation

Warning: Installation should be performed by individuals familiar with automotive electrical systems. Disconnect the vehicle's battery before beginning installation to prevent electrical shorts or damage.

1. Plan Layout: Determine the desired placement for each light strip (dashboard, doors, footwells, door handles, storage pockets).
2. Install Light Strips:
   • For Starry Sky Acrylic LED Door Light Strips: Utilize the integrated clips for recessed installation into appropriate gaps in door panels.
   • For other light strips (dashboard, footwell, door handle, storage pocket): Use the provided adhesive pads to secure them in place.
3. Connect Wiring: Refer to the wiring diagram below for proper connections.
   • Connect the main dashboard LED light strip (110cm) and secondary dashboard LED light strip (35cm) to the central controller module.
   • Connect the four door light strips (two 60cm and two 50cm) to the sub-control modules.
   • Connect footwell lights, interior door handle lights, and door storage pocket/cupholder lights to the appropriate ports on the central or sub-control modules as indicated in the diagram.
   • Connect the plug-and-play power harness to the central controller module and to a suitable 12V DC power source in your vehicle (e.g., fuse box, accessory power).
4. Secure Wiring: Use cable ties to neatly secure all wiring, ensuring it does not interfere with moving parts or create hazards.
5. Mount Control Modules: Secure the central and sub-control modules in discreet, accessible locations using adhesive pads or other suitable methods.
6. Reconnect Power: Once all connections are secure and verified, reconnect the vehicle's battery.

For a visual demonstration of the lighting effects, please refer to the product video:

Operating Instructions

The ambient lighting system can be controlled via a smartphone app or physical buttons.

1. Smartphone App Control

1. Download App: Scan the QR code on the Central Controller Module to download the dedicated smartphone application.
2. Connect via Bluetooth: Enable Bluetooth on your smartphone and open the app. The app should automatically detect and connect to the lighting system.
3. Customize Settings:
   • Brightness and Speed: Adjust the intensity of the lights and the speed of dynamic effects.
   • Color Selection: Choose from 256 individual colors or explore 16 million color options.
   • Preset Modes: Select from hundreds of pre-programmed lighting modes, including waterfall effects, rainbow lighting, and flowing water-like transitions.
   • Welcome Animation: Configure an elegant welcome animation that activates upon starting the vehicle.

2. Physical Switch/Button Module

• Power ON/OFF: Press the power button on the physical control module to turn the lamp ON/OFF.
• Mode Switching: Use the dedicated buttons to quickly cycle through different lighting modes without needing your smartphone.

3. Music Synchronization / Voice Rhythm

• The system features a built-in high-sensitivity microphone.
• Activate the music synchronization mode via the app. The lights will then pulse, flash, or smoothly transition in response to your music or ambient sounds.

User Tips

• For optimal visual effect, install the light strips in areas with minimal direct sunlight.
• Experiment with different app modes and custom colors to find your preferred ambiance.
• Ensure all connections are tight and secure to prevent flickering or intermittent operation.

Maintenance

• Cleaning: Gently wipe the acrylic light panels with a soft, dry, or slightly damp cloth. Avoid abrasive cleaners or solvents.
• Inspection: Periodically check wiring connections for any signs of wear or looseness.
• Software Updates: Check the smartphone app regularly for any available firmware updates for the control module to ensure optimal performance and new features.

Troubleshooting

Frequently Asked Questions (FAQ)

Q: Lamp Fails to Illuminate?

A: Check the power supply connection to the central controller module. Ensure the vehicle's 12V power source is active. Verify all wiring connections are secure and that no light strips or bulbs are damaged.

Q: Flickering Light?

A: Flickering light may indicate poor electrical contact. Recheck all wiring connections, especially at the control modules and individual light strips. Ensure the power supply is stable.

Q: App cannot connect to the device?

A: Ensure Bluetooth is enabled on your smartphone. Restart the app and try reconnecting. If issues persist, try restarting your vehicle to cycle power to the lighting system.

Warranty and Support

For any issues or inquiries regarding your Dreamcolor Acrylic Interior Car LED Strip Light, please contact customer service. Provide your product model and a detailed description of the issue for efficient support.

Avoid Damp Environments: Do not use this product in humid conditions.

Keep Out of Reach of Children: Prevent accidental operation by children.