Product Overview
The AUXITO Dual Color LED Fog Light Bulbs are designed to provide superior illumination for your vehicle, offering both 6500K white and 3000K gold yellow light options. These bulbs feature a 1:1 same beam design as halogen bulbs, ensuring bright light without blinding oncoming vehicles and eliminating dark spots. With a durable aviation aluminum body and IP65 waterproof rating, they are built for reliability and a long lifespan.
Setup and Installation
These LED fog light bulbs are designed for easy, plug-and-play installation, closely matching the size of standard halogen bulbs. They feature a non-polarity socket for straightforward connection.
- Ensure your vehicle's ignition is off and the engine is cool.
- Locate your vehicle's fog light housing. Consult your vehicle's owner's manual for specific instructions on accessing the fog light bulbs.
- Carefully remove the existing halogen fog light bulb from its socket.
- Insert the AUXITO LED fog light bulb into the housing. The non-polarity design means it can be inserted in either orientation.
- Secure the bulb in place and reconnect any wiring harnesses.
- Test the lights to ensure proper function.
Important Note:
For some sensitive vehicles, an additional CANbus adapter or load resistor may be required to prevent dashboard errors or flickering lights. If you experience these issues after installation, consider purchasing and installing a compatible CANbus adapter or load resistor.
Operating Instructions
The AUXITO Dual Color LED Fog Light Bulbs feature a switchback function, allowing you to toggle between 6500K white light and 3000K gold yellow light. This is typically achieved by simply turning your fog lights off and then immediately back on. The bulbs are designed to sync perfectly, ensuring both lights display the same color.
The 6500K white light provides bright, clear illumination for general driving conditions, while the 3000K gold yellow light is ideal for enhancing visibility in adverse weather conditions such as fog, snow, or heavy rain.
Maintenance
The AUXITO LED Fog Light Bulbs are designed for minimal maintenance due to their robust construction and efficient design.
- Durability: The bulbs feature a whole aviation aluminum lamp body, ensuring excellent heat dissipation and structural integrity.
- Protection: With an IP65 waterproof rating and fanless, dustproof design, these bulbs are protected against water, dust, and extreme weather conditions, ensuring normal operation in rain or snow.
- Lifespan: The highly efficient and reliable cooling system contributes to a long lifespan of 30,000 hours, reducing the need for frequent replacements.
Periodically inspect the bulbs for any physical damage or debris accumulation. Clean with a soft, dry cloth if necessary. Avoid using abrasive cleaners or solvents.
Troubleshooting
If you encounter any issues with your AUXITO LED Fog Light Bulbs, refer to the following common problems and solutions:
- Flickering Lights or Dashboard Errors: As noted in the setup section, some sensitive vehicles may require a CANbus adapter or load resistor to resolve these issues. If flickering or error messages appear, installing such a device is recommended.
- One Bulb Not Lighting Up: Check the connection to ensure it is secure. Although the bulbs are non-polarity, re-inserting the bulb in the opposite orientation can sometimes resolve connection issues.
- Incorrect Color Display: Ensure the switchback function is being activated correctly (turn off and immediately on). If one bulb displays a different color, try cycling the lights a few times.
- Dim or Uneven Light Output: Verify that the bulbs are correctly seated in the housing and that there is no obstruction. Ensure your vehicle's electrical system is providing adequate voltage (DC 9-30V).
If problems persist after attempting these solutions, please contact AUXITO customer support for further assistance.
Specifications
| Feature | Specification |
|---|---|
| Socket Type | H8 H9 H11 H16(JP) |
| LED Chips | 12Pcs CSP LED Chips |
| Waterproof Rating | IP65 |
| Working Voltage | DC 9-30V |
| Lumen Output | 2000LM/bulb, 4000LM/set |
| Power Output | 20W/bulb, 40W/set |
| Color Temperature | 3000K Gold Yellow + 6500K White |
| Lifespan | 30,000 Hours |
| Material | Aviation Aluminum |
| Certification | CE |
| Origin | Mainland China |
| Package Contents | 2 Pcs Fog Lamp |
| Package Weight | 0.11 kg |
| Package Dimensions | 10 x 10 x 8 cm |
Warranty and Support
The AUXITO Dual Color LED Fog Light Bulbs come with a 1-Year Warranty from the date of purchase. This warranty covers manufacturing defects and ensures the product performs as specified under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact AUXITO customer service through the retailer where you purchased the product. Please have your proof of purchase ready when contacting support.
User Tips
- Easy Color Switching: To change between white and yellow light, simply turn your fog lights off and then immediately back on. The bulbs are designed to synchronize their color changes.
- Check for CANbus: If your vehicle is known to be sensitive to aftermarket LED bulbs (e.g., BMW, Ford Focus), be prepared to install a CANbus adapter or load resistor to prevent flickering or dashboard error messages.
- Beam Pattern: These bulbs offer a 1:1 beam design similar to halogen, providing focused light. Some users note that the LED strip is narrow, which can result in a concentrated beam, especially when used in the far-end position.
- Brightness: Users consistently report these bulbs are very bright, offering a significant upgrade over standard halogen bulbs.
- Fitment: The bulbs are generally reported to fit perfectly into standard H8, H9, H11, H16(JP) bases without modifications.