LHY AUDIO LT3042

Contents

LHY LT3042 Low Noise High Precision Linear Voltage Regulator User Manual

Model: LT3042

1. Introduction

Thank you for purchasing the LHY LT3042 Low Noise High Precision Linear Voltage Regulator. This device is designed to provide exceptionally clean and stable DC power, significantly reducing noise and interference for sensitive audio and digital equipment. Featuring a high-capacity battery, the LT3042 offers both 5V and 12V output options (depending on the model) and includes USB output capabilities for versatile use.

2. Safety Information

  • Read Instructions: Before operating the device, thoroughly read and understand all instructions in this manual.
  • Electrical Safety: Do not expose the device to water, moisture, or extreme temperatures. Ensure hands are dry when handling.
  • Ventilation: Do not block any ventilation openings. Ensure adequate airflow around the device to prevent overheating.
  • Power Adapter: Use only the specified power adapter for charging. Using an incorrect adapter may damage the device or pose a safety risk.
  • Disassembly: Do not attempt to disassemble, modify, or repair the device yourself. Refer all servicing to qualified personnel.
  • Placement: Place the device on a stable, flat surface away from direct sunlight, heat sources, and flammable materials.
  • Children and Pets: Keep the device out of reach of children and pets to prevent accidents.

3. Product Overview

3.1 Front Panel Controls and Indicators

The front panel provides essential controls and status indicators:

  • DC Input: Power input port for charging.
  • Charging Indicator: Illuminates when the device is charging (typically orange) and changes color (typically green) when fully charged.
  • Battery Status LEDs: Four LEDs indicating battery charge levels: 25%, 50%, 75%, 100%.
  • DC Output Indicator: Illuminates when DC output is active.
  • Input Switch (ON/OFF/Charge): Controls the power input and charging function.
  • Output Switch (ON/OFF): Controls the DC power output.
LHY LT3042 Front Panel
Figure 3.1: Front Panel Layout of LHY LT3042. Shows DC Input, Charging, Battery Status LEDs, DC Output, and ON/OFF switches.

3.2 Rear Panel Ports (Model Dependent)

The rear panel features different ports based on the 5V USB or 12V version:

  • 5V USB Version:
    • DC-OUT: DC power output port.
    • USB 5V: USB Type-A output port providing 5V.
    • V.Adj: Voltage adjustment port (typically factory-set).
    • DCIN 9V: DC power input port for charging (requires 9V adapter).
  • 12V Version:
    • DC12V: DC power output port providing 12V.
    • V.Adj: Voltage adjustment port (typically factory-set).
    • DC16.8V IN: DC power input port for charging (requires 16.8V adapter).
LHY LT3042 Rear Panels
Figure 3.2: Rear Panel Layouts. Top shows the 12V version with DC12V output and DC16.8V IN. Bottom shows the 5V USB version with DC-OUT, USB 5V, and DCIN 9V.

3.3 Internal Architecture

The LT3042 utilizes a sophisticated internal design for optimal performance:

  • High-Capacity Batteries: Equipped with Samsung batteries for extended operation.
  • Charge/Discharge Protection: Built-in circuitry at the bottom of the unit protects against overcharge and over-discharge, ensuring battery longevity and safety.
  • Filter Energy Storage: Advanced filtering components minimize ripple and noise.
  • LT3042+PNP Architecture: Professional noise reduction technology, achieving noise levels as low as 1μV, combined with PNP expansion for high current and low noise output.
LHY LT3042 Internal Diagram
Figure 3.3: Internal Architecture. Highlights Samsung batteries, charge/discharge protection, filter energy storage, and LT3042+PNP architecture.

4. Setup

4.1 Initial Charging

Before first use, it is recommended to fully charge the device:

  1. Connect the appropriate DC power adapter to the input port on the rear panel (DCIN 9V for 5V version, DC16.8V IN for 12V version).
  2. For the 12V version, set the front panel Input Switch to 'Charge' and the Output Switch to 'OFF'.
  3. For the 5V version, set the front panel Input Switch to 'ON' and the Output Switch to 'OFF'.
  4. The 'Charging' indicator on the front panel will illuminate (orange). Monitor the Battery Status LEDs to track charging progress.
  5. Charging is complete when the 'Charging' indicator turns green and all Battery Status LEDs are lit.

4.2 Voltage Adjustment (V.Adj)

The V.Adj port on the rear panel allows for fine-tuning of the output voltage. This is typically factory-calibrated and should not require adjustment under normal circumstances. If precise voltage adjustment is needed, use a suitable tool and a multimeter to monitor the output voltage carefully.

5. Operating Instructions

The LHY LT3042 offers several operating modes controlled by the front panel switches.

5.1 Operating Modes for 12V Version

12V Version Operating Modes
Figure 5.1: Front panel with switches highlighted for 12V version. Table details operating modes.
Table 5.1: 12V Version Operating Modes
ModeInput SwitchOutput SwitchStatus
1OFFOFFShutdown
2ChargeOFFCharging
3ChargeONCharging and Outputting Simultaneously
4OFFONPure Battery Output

Note: When using the 12V version, the adapter's green light indicates a full charge, while an orange light indicates charging in progress.

5.2 Operating Modes for 5V Version

5V Version Operating Modes
Figure 5.2: Front panel with switches highlighted for 5V version. Table details operating modes.
Table 5.2: 5V Version Operating Modes
ModeInput SwitchOutput SwitchStatus
1OFFOFFShutdown
2ONOFFCharging
3ONONCharging and Outputting Simultaneously
4OFFONPure Battery Output

Note: For the 5V version, the 'Charging' indicator on the panel will be green when fully charged and orange when charging.

5.3 Connecting Devices

Use appropriate DC cables or USB cables to connect your equipment to the LT3042. For optimal noise isolation with USB devices, the 5V version can utilize a dual USB-A cable setup:

  • One USB-A cable (e.g., blue) for data signal connection to your computer.
  • Another USB-A cable (e.g., black) for independent power supply from the LT3042 to your USB device. This isolates the device from potential noise and interference from the computer's power supply.
USB Connection for Noise Isolation
Figure 5.3: Example of USB connection for noise isolation. Shows separate USB cables for signal and power to a USB device, isolating it from computer power noise.

6. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the exterior of the device. Do not use liquid cleaners or abrasive materials.
  • Storage: When not in use for extended periods, store the device in a cool, dry place. Ensure the battery is not fully discharged before storage.
  • Battery Care: To prolong battery life, avoid frequent deep discharges. If storing for a long time, charge the battery to about 50-70% every few months.
  • Ventilation: Ensure the device's vents are not obstructed to prevent overheating.

7. Troubleshooting

  • Device Does Not Power On:
    • Ensure the battery is charged.
    • Check that both Input and Output switches are in the correct 'ON' position for the desired operation.
  • No Output Power:
    • Verify the Output Switch is set to 'ON'.
    • Check the Battery Status LEDs; the battery might be too low.
    • Ensure the connected device is not drawing excessive current, which might trigger protection circuits.
  • Device Overheats:
    • Ensure proper ventilation around the device.
    • Reduce the load on the output.
    • If overheating persists, discontinue use and contact support.

8. Specifications

Table 8.1: LHY LT3042 Technical Specifications
FeatureSpecification
ModelLT3042
Battery Capacity20000mAh
Output Voltage (5V Version)5V DC (USB and DC-OUT)
Output Voltage (12V Version)12V DC
Output Current (5V Version)Up to 2A (shared between DC-OUT and USB)
Output Current (12V Version)Up to 2A
Noise LevelAs low as 1μV
Voltage Accuracy1%
Continuous Discharge Time (5V, 1.25A load)Approximately 7 hours
Continuous Discharge Time (12V, 2A load)Approximately 2 hours
Full Charge Time (5V Version)Approximately 6 hours
Full Charge Time (12V Version)Approximately 3 hours
Input Voltage (5V Version)9V DC
Input Voltage (12V Version)16.8V DC

9. User Tips

No specific user tips were available from provided reviews or Q&A. However, general advice for using high-precision power supplies includes:

  • Always ensure your connected device's voltage and current requirements match the LT3042's output to prevent damage.
  • For critical audio applications, experiment with pure battery output mode for the cleanest power delivery.

10. Warranty and Support

For warranty information, technical support, or service inquiries, please contact your original retailer or the manufacturer. Do not attempt to repair the device yourself, as this may void your warranty and could cause further damage or injury.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.