KERDOM Ergonomic Executive Office Chair

Contents

KERDOM Ergonomic Executive Office Chair

Instruction Manual

Introduction

Thank you for choosing the KERDOM Ergonomic Executive Office Chair. This manual provides detailed instructions for the assembly, operation, and maintenance of your new office chair. Please read this manual thoroughly before assembly and use to ensure proper function and longevity of the product. Keep this manual for future reference.

KERDOM Ergonomic Executive Office Chair

Figure 1: KERDOM Ergonomic Executive Office Chair (Black)

Safety Information

  • Ensure all components are securely fastened before use.
  • Do not stand on the chair.
  • Do not use the chair if any parts are damaged or missing.
  • Keep children away from moving parts during assembly and adjustment.
  • Do not exceed the maximum weight capacity of 400 lbs (181 kg).

Package Contents

Before beginning assembly, please verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

Upgraded Components of the KERDOM Office Chair

Figure 2: Illustration of Upgraded Components including SGS Air Rod, 360° Casters, 400 LBS base, and Chassis.

  • Backrest
  • Seat Cushion
  • Armrests (Left and Right)
  • Chair Base (High Load-Bearing Tripod)
  • Casters (Low Noise Rollers)
  • SGS Certified Air Rod (Gas Lift)
  • Mechanism Plate
  • Hardware (Screws, Washers, Allen Wrench)

Assembly / Setup

Assembly is required for this office chair. Follow these general steps. Refer to the included assembly diagram for specific screw placements and orientation.

  1. Attach Casters to Base: Insert the casters into the holes at the end of each leg of the chair base until they click securely into place.
  2. Insert Gas Lift: Place the SGS Certified Air Rod (gas lift) into the center hole of the chair base.
  3. Attach Mechanism Plate to Seat: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Secure it with the provided screws. Ensure the lever is facing the front of the seat.
  4. Attach Armrests to Seat: Secure the armrests to the sides of the seat cushion using the provided screws. Pay attention to the 'L' (left) and 'R' (right) markings if present.
  5. Attach Backrest to Seat and Armrests: Connect the backrest to the seat cushion and the armrests using the remaining screws. Ensure all connections are firm.
  6. Connect Seat Assembly to Gas Lift: Carefully place the assembled seat onto the gas lift, ensuring the tapered end of the gas lift fits securely into the mechanism plate.
  7. Final Check: Wiggle the chair gently to ensure all parts are stable and securely fastened.
Chair components: SGS Certified Air Rod, Low Noise Roller, High Load-Bearing Tripod

Figure 3: Key components for assembly: Gas Lift, Casters, and Chair Base.

Operating Instructions

Your KERDOM office chair offers several adjustable features to enhance your comfort and support.

  • Height Adjustment: Locate the lever on the right side beneath the seat. To raise the seat, lift the lever while taking your weight off the seat. To lower the seat, lift the lever while seated. Release the lever to lock the height.
  • Recline/Tilt Function (90°-120° Regulation): The chair features a recline function allowing adjustment between 90° (working), 105° (watching), and 115° (relaxing). Use the lever on the left side (or the same lever as height adjustment, depending on model) to unlock the tilt. Lean back to your desired angle and push the lever in to lock. Pull out to unlock and return to upright position.
  • Tilt Tension Adjustment: A round knob located under the front of the seat allows you to adjust the tension of the recline mechanism. Turn clockwise to increase tension (making it harder to recline) or counter-clockwise to decrease tension (making it easier to recline).
  • Flip-Up Armrests (90°): The armrests can be flipped up by 90 degrees. This feature allows you to push the chair closer to your desk or save space when not in use. Simply lift the armrests upwards until they lock into the vertical position. Push them down to return to the horizontal position.
  • 360° Swivel: The chair is designed with a 360° swivel function for easy movement and access to different areas of your workspace without standing up.
  • Quiet Smooth Wheels: The low-noise rollers provide smooth and quiet mobility across various floor surfaces.
Chair features: 90°-120° Regulation, 360° Rotation, Height Adjust, Quiet Smooth Wheels

Figure 4: Visual guide to chair adjustments including recline, rotation, height, and wheels.

90° Flip-Up Armrest feature

Figure 5: Demonstration of the 90° flip-up armrest for space-saving.

Maintenance

  • Cleaning: For the PU leather material, wipe with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners. The material is wear-resistant and easy to clean.
  • Hardware Check: Periodically check all screws and bolts to ensure they are tight. Re-tighten if necessary to maintain stability and prevent squeaking.
  • Caster Care: Keep the wheels clean from hair and debris to ensure smooth rolling.
  • Gas Lift: The SGS Certified Air Rod is designed for durability and consistent performance. No specific maintenance is required, but ensure it operates smoothly.
  • General Inspection: Regularly inspect the chair for any signs of wear or damage. Address any issues promptly to prevent further damage or safety hazards.
PU Leather Material properties: Non-deformable, Wear Resistant, Easy To Clean

Figure 6: Features of the PU leather material, highlighting ease of cleaning and durability.

Troubleshooting

Problem Possible Cause Solution
Chair wobbles or is unstable Loose screws or uneven assembly. Check and tighten all screws, especially those connecting the seat, backrest, and armrests. Ensure the gas lift is fully seated in the base.
Height adjustment not working Gas lift not properly installed or damaged; lever mechanism stuck. Ensure the gas lift is correctly inserted. Check if the lever is obstructed. If the gas lift is faulty, it may need replacement.
Chair squeaks Loose connections; friction between parts. Tighten all screws. Apply a small amount of silicone lubricant to moving parts or contact points if necessary.
Casters not rolling smoothly Debris (hair, dust) caught in wheels; damaged casters. Clean any debris from the caster wheels. If damaged, casters may need replacement.
Recline/Tilt function not working Tilt lock engaged; tilt tension too tight. Ensure the tilt lock lever is disengaged. Adjust the tilt tension knob counter-clockwise to loosen.

Specifications

Product Dimensions Diagram

Figure 7: Detailed product dimensions including height, width, and seat depth.

Feature Detail
Brand KERDOM
Type Office Furniture, Office Chair
Material PU Leather (Non-deformable, Wear Resistant, Easy To Clean), Metal Frame
Color Black
Adjustable Height Yes
Ergonomics Yes (Head, Back, Lumbar, Hip/Leg Support)
Recline Function 90°-120° Regulation (Swing Function)
Armrests Yes, 90° Flip-Up Armrests
Rotation 360° Swivel
Cushioning Yes, 13cm / 5.1" Thick Seat Cushion
Rollers/Wheels Yes, Low Noise Rollers / Quiet Smooth Wheels
Gas Lift SGS Certified Air Rod (Level 3)
Base Strong Metal Base / High Load-Bearing Tripod
Maximum Weight Capacity 400 lbs (181 kg)
Product Dimensions (approx.) Overall Height: 113-123 cm (44.5-48.4 in)
Seat Width: 52 cm (20.5 in)
Seat Depth: 50 cm (19.7 in)
Base Diameter: 70 cm (27.6 in)
Package Dimensions (approx.) Length: 72 cm, Width: 28 cm, Height: 63 cm
Package Weight (approx.) 15.7 kg
Ergonomic Lumbar Support Diagram

Figure 8: Ergonomic design highlighting head, back, lumbar, and hip/leg support.

User Tips

  • Optimal Ergonomics: Adjust the chair height so your feet are flat on the floor and your knees are at a 90-degree angle. Use the recline function to find a comfortable working or relaxing posture throughout the day.
  • Space Saving: Utilize the 90° flip-up armrests to easily tuck the chair under your desk when not in use, maximizing your workspace.
  • Regular Cleaning: Wipe down the PU leather regularly with a damp cloth to keep it looking new and prevent dirt buildup.

Warranty and Support

For any questions, concerns, or support regarding your KERDOM Ergonomic Executive Office Chair, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.