Bileeko Single DIN Car Radio

Contents

Bileeko Single DIN Car Radio Stereo Audio System

User Instruction Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Bileeko Single DIN Car Radio Stereo Audio System. This system features a wireless remote, RGB light, APP control, FM radio, lossless MP3 playback, memory card slot, AUX input, and dual USB ports. Please read this manual thoroughly before using the product to ensure proper function and safety.

Safety Information

  • Ensure proper wiring connections to prevent damage to the unit or your vehicle. Incorrect wiring can cause fire or malfunction.
  • Do not operate the unit in a way that distracts you from driving. Always prioritize road safety.
  • Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
  • Do not attempt to disassemble or modify the unit. This could lead to electric shock or damage and will void the warranty.
  • Keep the volume at a level that allows you to hear outside traffic sounds.

Package Contents

Verify that all items are present in the package:

  • 1 x Car Stereo System
  • 1 x Remote Controller (requires 2 x AAA batteries, not included)
  • 1 x Wiring Harness (4 accessories)
  • 1 x User Manual (this document, also available as PDF)
Bileeko Single DIN Car Radio with remote, wiring harness, and installation tools
Image: Main product unit, remote control, wiring harness, and removal tools.

Product Overview

Front Panel Introduction

Front and rear panel diagram of the car radio with labeled buttons and ports
Image: Front and rear panel layout with labeled controls and connections.
  • Microphone input: For hands-free calling.
  • Time setting (CLK): Button to adjust the clock.
  • Next track: Skip to the next audio track.
  • End call / Power on/off / Mode (O/MOD): Multifunction button for power, mode selection, and ending calls.
  • Mute: Silence audio output.
  • Previous track: Go to the previous audio track.
  • Reset hole (RST): Small hole for resetting the unit.
  • BND: Band selection for radio, short press to answer phone.
  • 1/>II: Radio preset 1, Pause/Play playback.
  • 2/INT: Radio preset 2, Intro playback.
  • 3/RPT: Radio preset 3, Repeat playback.
  • 4/RDM: Radio preset 4, Random playback.
  • 5/-10: Radio preset 5, skip back 10 tracks/select folder.
  • 6/+10: Radio preset 6, skip forward 10 tracks/select folder.
  • Card slot (TF): For small memory cards (up to 256GB).
  • USB read: USB 2.0 port (black) for data reading.
  • USB charging: USB port (orange) for fast charging.
  • IR: Infrared receiver for remote control.
  • AUX: Front AUX input.

Rear Panel Connections

  • ISO standard plug: For power cord and speaker wire connections.
  • Radio antenna: Input for car radio antenna.
  • Audio left channel output: RCA output for left audio channel.
  • Audio right channel output: RCA output for right audio channel.

Dimensions

Diagram showing the dimensions of the car radio unit
Image: Dimensions of the car stereo unit.
  • Installation Size: Approx. 178 x 50mm / 7 x 2in
  • Panel Size: Approx. 187 x 58mm / 7.4 x 2.3in
  • Main Unit Depth: Approx. 65mm / 2.6in

Setup

Connection / Wiring

Refer to the wiring diagram for correct connections. Different colored cables connect to different parts of your car's electrical system. Incorrect wiring can cause damage to the unit or vehicle.

Wiring harness for the car radio
Image: The included wiring harness.

Wiring Guide:

  • Black: Negative (Ground)
  • Red: Connect to ACC (Accessory Power)
  • Blue: Automatic Antenna / Remote Turn-On
  • Yellow: Positive Pole (Constant 12V Power)
  • Front Left Speaker +: Green
  • Front Left Speaker -: Green/Black
  • Rear Left Speaker +: White
  • Rear Left Speaker -: White/Black
  • Front Right Speaker +: Grey
  • Front Right Speaker -: Grey/Black
  • Rear Right Speaker +: Purple
  • Rear Right Speaker -: Purple/Black

For a detailed visual wiring diagram, please consult the User Manual PDF.

Note: The unit includes an auto power-off guard for reverse power connection, but always double-check your wiring before powering on.

Installation

The unit is designed for a standard single DIN slot. Ensure sufficient space for the unit and its wiring. Use the provided removal tools (if applicable) to remove your old head unit. Connect the wiring harness as described above, then slide the new unit into the dashboard slot until it clicks into place. Secure it with any mounting brackets or screws provided with your vehicle or the unit.

Operating Instructions

Power ON/OFF

  • Turn On: Short press the O/MOD button.
  • Turn Off: Short press the O/MOD button again.

Note: When turning on for the first time, you may hear FM noise if no FM signal is present. This is normal. On subsequent power-ups, the unit will play the last FM station.

Setting the Clock

  1. Long press the "CLK" button. The "minute" display will twinkle. Rotate the Volume control knob to adjust the minutes.
  2. Short press "CLK" or rotate the Volume control. The "hour" display will twinkle. Rotate the Volume control knob to adjust the hours.
  3. Long press "CLK" again or wait 3 seconds to save the time.

Note: In some cars, the clock may still display when the radio is off. This depends on how your car's power system is wired (constant power vs. accessory power). This is a characteristic of the vehicle's wiring, not a defect of the device.

FM Radio

Car radio displaying FM 96.3 MHz frequency
Image: FM radio display.

Automatic Search:

  1. Short press the "AMS" button. The radio will automatically search for FM stations from 87.5-108MHz and store up to 18 stations (F1P1-F1P6, F2P1-F2P6, F3P1-F3P6).
  2. The radio will then play the found stations in order (5 flashes per station).
  3. It will return to the first radio station to play normally.

Semi-automatic Search:

  • Short press the ">>" or "<<" buttons to manually scan frequencies.
  • When you find a desired station, press the opposite button to stop searching.

Saving Stations (1-6):

  • Once you are on a desired station, long press one of the 1-6 preset buttons for 5 seconds to save it.

Bluetooth Mode

Pairing:

  1. Short press the "O/MOD" button until the LCD displays "TUNE - BT - AUX".
  2. Select "BT" mode. On your smartphone, search for Bluetooth devices and select "CAR-BT".
  3. Enter the password "0000" if prompted. Some phones may connect automatically.
  4. Upon successful pairing, the LCD will display "BT ON".

Call Control:

  • End Call: Short press the "O/MOD" button.
  • Answer Call: Short press the "BND" button.

USB/AUX Mode

Car radio showing various playback methods: USB, SD card, and AUX input
Image: Various playback methods supported.
  • Insert a USB disk into the black USB 2.0 port or connect a portable player via a 3.5mm AUX cable to the front AUX input.
  • Audio will automatically play through the car speakers.

Note: The radio may take approximately 10 seconds to read files from USB devices.

SD Card Mode

  • Gently insert a small memory card (SD/MMC) into the TF card slot.
  • Select "SD" mode using the O/MOD button. Music playback will start automatically.

Note: The radio may take approximately 10 seconds to read files from the memory card.

Button Functions (Playback)

  • 1/>II Button: Short press to play/pause.
  • 2/INT Button: Short press to play the first few seconds of each track (intro). Press again to stop intro and listen to the full track.
  • 3/RPT Button: Short press to repeat the current track. Press again to cancel repeat mode.
  • 4/RDM Button: Short press to play tracks in random order. Press again to cancel random mode.
  • 5/-10 Button: Short press to skip back 10 tracks. Long press to select a folder.
  • 6/+10 Button: Short press to skip forward 10 tracks. Long press to select a folder.

Audio Copy / Recording

Car radio displaying 'REC' for audio recording
Image: Audio copy feature with 'REC' indicator.
  • The unit supports recording from radio, music, and AUX input.
  • To Start Recording: Long press the volume knob. The screen will display "REC".
  • To End Recording: Long press the volume knob again.

APP Control & RGB Light

Smartphone connected to car radio via app for control
Image: Smartphone demonstrating APP control.
  • The unit supports smartphone APP integration for remote control of main unit and playback functions.
  • Download the official APP (refer to the PDF manual for QR code or app store name).
  • Connect your smartphone via Bluetooth to use the APP.
  • The APP also features a car location finding function.
  • The unique RGB key backlighting offers seven color options for customizable driving ambiance, controllable via the unit or APP.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the unit's surface. Do not use abrasive cleaners or solvents.
  • Dust: Regularly clean dust from the front panel and around buttons to ensure smooth operation.
  • Temperature: Avoid leaving the unit in direct sunlight or extremely hot/cold conditions for extended periods.

Troubleshooting

Problem Possible Cause Solution
No power Incorrect wiring; Blown fuse; Vehicle power issue. Check all wiring connections (especially constant 12V and ACC). Check vehicle fuses. Ensure car battery is charged.
No sound Speaker wires disconnected; Volume too low; Mute function active; Incorrect audio source. Check speaker wiring. Increase volume. Deactivate mute. Select correct audio source (FM, USB, AUX, BT).
FM noise on first startup No FM signal detected initially. This is normal. Once an FM station is tuned, it will play normally.
Clock resets or doesn't save time Unit not receiving constant 12V power (yellow wire). Verify the yellow wire is connected to a constant 12V power source in your vehicle. This is often a vehicle-specific wiring characteristic.
Bluetooth pairing fails Incorrect pairing steps; Device not in pairing mode; Interference. Ensure the unit is in BT mode. Restart Bluetooth on your phone and the car stereo. Try pairing again. Ensure no other devices are connected.
USB/SD card not reading Unsupported format; Corrupted files; Card/drive issues. Ensure files are in supported formats (MP3/WMA/WAV/FLAC/APE). Try a different USB drive/SD card. Reformat the drive/card if necessary.

Specifications

Feature Specification
Item Type Single DIN Car Stereo
Material ABS, Aluminum Alloy
Screen Type LCD Display (66x22mm)
Control Methods Panel Key, Wireless Remote, Wireless APP Control
Bluetooth Version 5.1 (Default Name: SWL-BT)
Output Power 60W x 4 Channels
Radio Frequency FM 87.5-108MHz
Key Light RGB Seven Color Light Effect
Phone Connection Support (via APP for remote control)
Location Find Car Support (via phone APP)
Wiring Guard Auto power off guard for reverse power connection
Front USB Ports 1 x USB 2.0 Reading (Black), 1 x USB Charging (Orange)
Small Memory Card Supports up to 256GB (Not Included)
Reset Key Supported
Audio Output 4 Channels (2 Left Channels + 2 Right Channels)
Audio Input Front AUX Input (Left Channel + Right Channel)
Audio Formats MP3/WMA/WAV/FLAC/APE
Remote Controller Battery 2 x AAA Battery (Not Included)

Note: This unit is not a CD player.

User Tips

  • Pre-set your favorite stations: Take a few minutes to scan and save your most listened-to FM stations for quick access while driving.
  • Organize your media: For USB drives and SD cards, organize your music into folders to easily navigate using the +10/-10 buttons.
  • Utilize APP control: The smartphone app can offer a more intuitive way to control settings and playback, especially for passengers.
  • Check remote batteries: If the remote isn't responding, ensure the AAA batteries are fresh and correctly inserted.
  • Consider external amplification: For enhanced sound quality, the 4-channel AV interface output allows for easy expansion with external amplifiers or subwoofers.

Warranty and Support

This product comes with a standard manufacturer's warranty. For specific warranty terms, duration, and support inquiries, please refer to the seller or the official product page where you made your purchase. Keep your proof of purchase for warranty claims.

If you encounter any issues not covered in this manual, please contact the seller's customer support for professional technical guidance and services.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.