Sembo Block J-50 Carrier Fighter Military Assembly Model 202280

Contents

Sembo Block J-50 Carrier Fighter Military Assembly Model

Model: 202280

Brand: Sembo Block

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Sembo Block J-50 Carrier Fighter Military Assembly Model. Crafted from high-quality ABS plastic, this building block set offers an engaging and educational experience, enhancing fine motor skills, spatial awareness, and storytelling abilities. Please read through this manual carefully before beginning assembly to ensure a smooth and enjoyable building process.

Sembo Block J-50 Carrier Fighter Military Assembly Model
Figure 1: Sembo Block J-50 Carrier Fighter Military Assembly Model

2. Important Safety Warnings

  • Choking Hazard: This product contains small parts and is not suitable for children under three (3) years old. Do not swallow any parts to avoid choking.
  • Recommended Age: This model is recommended for ages 6 years old and above. Some complex steps may require assistance for younger builders. The manufacturer also recommends for ages 14+y and 18+.
  • Material Safety: Micro building blocks are made of high-quality, durable, non-toxic, and environmentally friendly ABS plastic. Its smooth surface and rounded design are intended to ensure the safety of children.
  • California Proposition 65 Warning: ⚠ WARNING: This product can expose you to chemicals including phthalates (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
  • Product Images: Product images may differ slightly from the actual product. Please refer to the actual product for final appearance.

3. Package Contents

Your Sembo Block J-50 Carrier Fighter Military Assembly Model package should contain the following:

  • High-quality ABS plastic building blocks (approximately 735 pieces)
  • Detailed assembly instruction booklet (not explicitly provided but implied for building blocks)

If any parts are missing upon receipt, please contact the seller immediately for assistance.

4. Assembly Instructions

The Sembo Block J-50 model utilizes self-locking bricks for a secure and stable build. Follow the step-by-step instructions provided in the included assembly booklet. Ensure each piece is firmly connected to achieve the intended structure and functionality.

Key Assembly Features:

  • Wing Restoration: The model features a mechanism for 'random wing restoration' and an 'Open S1 Lambda starting wing' design, allowing for dynamic display options.
  • Movable Components: Pay close attention to the assembly of movable parts such as the tail wings, main wings, landing gear, and cockpit door.
Detailed view of J-50 wing restoration and S1 Lambda starting wing
Figure 2: Detailed view of wing restoration and the 'Open S1 Lambda starting wing' mechanism.

5. Operating Features

Once assembled, your J-50 Carrier Fighter model boasts several interactive and display features:

  • Wing Folding: The wings can be folded to restore a carrier-based mode, mimicking real-life fighter jet operations. The movable tail wing design and main wing can also be folded for various display configurations.
  • Landing Gear: The landing gear can be retracted, allowing the model to be displayed in a 'charging into battle' flight posture.
  • Opening Cockpit: The cockpit door can be opened, revealing the interior and adding to the realism of the model.
  • Dual-Stream High-Volume Nozzle: The model features a dual-stream high-volume nozzle design, enhancing its realistic appearance.
  • Four-Way Magazine Design: The model incorporates a four-way magazine design, allowing for a 'heavy-duty impact mode' display.
J-50 model demonstrating wing folding, retracted landing gear, and nozzle design
Figure 3: Operational features including wing folding, retracted landing gear, and dual-stream high-volume nozzle design.
Close-up of J-50 cockpit with open canopy
Figure 4: Close-up of the J-50 cockpit with an open canopy.
J-50 model showing movable tail wing and foldable main wing
Figure 5: Aerial view highlighting the movable tail wing and foldable main wing.
J-50 model showcasing four-way magazine design
Figure 6: J-50 model in flight, showcasing the four-way magazine design and heavy-duty impact mode.
Top-down view of J-50 model demonstrating random wing restoration
Figure 7: Top-down view demonstrating random wing restoration.

6. Maintenance

To keep your Sembo Block J-50 model in excellent condition:

  • Cleaning: Use a soft, dry cloth to gently wipe away dust. For stubborn dirt, a slightly damp cloth can be used, followed by immediate drying. Avoid harsh chemicals or abrasive cleaners.
  • Storage: Store the model in a cool, dry place away from direct sunlight and extreme temperatures to prevent material degradation or discoloration.
  • Handling: Handle the model with care, especially movable parts, to prevent accidental breakage.

7. Troubleshooting

Missing Parts: If you discover any missing parts during or after assembly, please contact the seller immediately. Provide details of the missing components to facilitate a quick resolution.

Loose Connections: If any blocks feel loose, ensure they are pressed firmly together until they 'lock' into place. Self-locking bricks are designed for a snug fit.

8. Specifications

Feature Detail
Model Name J-50 Carrier Fighter Military Assembly Model
Model Number 202280
Brand Sembo Block
Material High-quality ABS Plastic
Block Type Small building block (Compatible with Lego), Self-Locking Bricks
Number of Pieces Approximately 735 PCS
Product Dimensions (L x W x H) 35.3 cm x 36.1 cm x 7.3 cm (13.9 in x 14.2 in x 2.9 in)
Box Dimensions (L x W x H) 56.0 cm x 37.8 cm x 8.0 cm (22.0 in x 14.9 in x 3.1 in)
Recommended Age 6 years old and above (also 14+y, 18+y)
Certification CE Certified
Electric Components No
Origin Mainland China
Technical diagram with J-50 model dimensions and piece count
Figure 8: Technical diagram showing model dimensions and piece count.

9. Warranty and Support

For any issues regarding missing parts, defects, or general inquiries about your Sembo Block J-50 Carrier Fighter Military Assembly Model, please contact the seller directly through your purchase platform. They will be able to provide the most accurate and timely support for your product.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.