1. Introduction
The HIROYASU HI-E380 is a new generation full-band two-way radio designed for amateur radio enthusiasts. It offers extensive frequency coverage and a range of powerful features, ensuring reliable communication across various bands and scenarios.
This manual provides detailed instructions for setting up, operating, and maintaining your HI-E380 walkie talkie. Please read it thoroughly to ensure proper use and to maximize your device's performance and lifespan.

2. Getting Started
2.1. Package Contents
Before you begin, please check the package contents to ensure all items are present:
- 1x HIROYASU HI-E380 Radio Body
- 1x High gain FM/136-174/400-470MHz Antenna (21.5cm)
- 1x 2200mAh Li-tthium polymer Battery (Model BT11)
- 1x Type-C charging Cable
- 1x Belt clip
- 1x English Manual
- 1x Lanyard

2.2. Device Overview
Familiarize yourself with the main components and controls of your HI-E380 walkie talkie:

- Antenna: For transmitting and receiving signals.
- Power Knob: Turns the device on/off and adjusts volume.
- Indicator Light: Shows device status (e.g., transmitting, receiving, charging).
- Display Screen: 1.77-inch 128*160 resolution full-color display for information.
- Microphone Jack: For external microphone connection.
- Headphone Jack: For external headphone connection.
- Analog PTT: Push-To-Talk button for analog transmission.
- PF2/PF3: Programmable function keys.
- Number Keypad: For frequency input and menu navigation.
- Type-C Charging Port: For charging the device.
3. Setup
3.1. Battery Installation
- Ensure the walkie talkie is powered off.
- Locate the battery compartment on the back of the device.
- Align the 2200mAh Li-polymer battery (BT11) with the compartment.
- Gently push the battery into place until it clicks securely.
3.2. Antenna Attachment
- Locate the antenna connector on the top of the radio.
- Screw the provided high-gain antenna clockwise onto the connector until it is finger-tight. Do not overtighten.
- For optimal performance, ensure the correct antenna is used for the desired frequency range. For example, a 27MHz frequency requires a CB antenna.
3.3. Charging the Battery
The HI-E380 features a Type-C charging port and supports optional dock charging.

- Type-C Charging: Connect the provided Type-C charging cable to the radio's Type-C port and a power adapter. Plug the power adapter into an AC power outlet.
- Dock Charging (Optional): Insert the battery pack or the radio with the battery pack into a compatible charging dock. Ensure proper contact with the charging terminals.
- Charging Indicator: When charging, the red indicator light will be on. It will turn green when charging is complete.
4. Operating Instructions
4.1. Basic Operations
4.1.1. Power On/Off and Volume Adjustment
Rotate the Power Knob clockwise to turn on the radio. Continue rotating to increase volume. Rotate counter-clockwise to decrease volume and turn off the radio.
4.1.2. Main Frequency Band Selection
From the Standby Screen, short press the [A/B] key or long press the [EXIT] key to select the main frequency. The larger display indicates the currently active main frequency band.
4.1.3. PTT Function
When operating on the A band, press the PTT key to transmit on the A band frequency. When operating on the B band, press the PTT key to transmit on the B band frequency.
4.1.4. Channel Mode and Frequency Mode Switch
Short press the [VFO/MR] key or long press the [OK] key button to switch between channel mode and frequency mode.
4.1.5. AM Air Band Mode
Short press the [VFO/MR] key or long press the [OK] key to switch to frequency mode. Directly input the air band frequency within the range of 108 MHz to 136 MHz. The radio will automatically enter AM reception mode, and the channel status will display AM. This mode is primarily used to receive AM modulated signals.

4.1.6. Commercial FM Radio Broadcast Reception
- Long press the button 0 to turn on the FM RADIO; the screen will display the current frequency.
- Use the UP/DOWN keys or the channel knob to adjust the frequency. You can also input a frequency directly via the keypad.

4.2. Menu Navigation
To access and configure advanced settings, use the menu system:
- Press the [OK/MENU] key to enter the main menu.
- Use the UP/DOWN keys or the channel knob to select the desired menu item.
- Press the [OK/MENU] key again to enter the selected menu.
- Use the UP/DOWN keys or the channel knob to choose menu options, or input keypad numbers to enter the function quickly.
- Press the [OK/MENU] key to confirm and return to the main menu.
- Press [EXIT] to exit the menu and return to normal operation mode.
4.2.1. Shortcut Keys Combination
The device features several shortcut key combinations for quick access to functions:
| Key Combination | Function |
|---|---|
| Long press number 1 | SCAN (Enter scanning function) |
| Long press number 2 | Memory Channel (Store frequency into channel) |
| Long press number 3 | Frequency step (Set frequency step) |
| Long press number 4 | Power Select (Select High, Middle, Low power) |
| Long press number 5 | Squelch (Adjust squelch levels) |
| Long press number 6 | Dual Standby (Turn on/off dual standby) |
| Long press number 7 | CTCSS (Set CTCSS sub tone) |
| Long press number 8 | Shift Direction (Set repeater shift direction) |
| Long press number 9 | Offset (Set repeater offset frequency) |
| Long press number 0 | FM Radio (Turn on FM Radio broadcast) |
| Long press number # | Keypad lock (Lock/Unlock keypad) |
| Short press number # | DTMF (DTMF tone edit) |
| Short press number * | R/T (Switch R/T) |
4.2.2. LCD Display Icons
The LCD display uses various icons to indicate the radio's status and active functions:
| Icon | Description |
|---|---|
| CT | Analog Sub-audio Tone Indicator. |
| DCS | Digital Sub-audio Tone Indicator. |
| H | High Power Indicator. |
| M | Medium Power Indicator. |
| L | Low Power Indicator. |
| N | Narrowband Mode Indicator. |
| W | Wideband Mode Indicator. |
| + | Frequency Mode (+ Frequency Offset). |
| - | Frequency Mode (- Frequency Offset). |
| R | Frequency/Channel Mode Inverted Frequency. |
| T | Simplex Mode. |
| SC | SC (Encryption) Indicator. |
| AM | AM Modulation Indicator. |
| SCR | Scrambler Function. |
| VOX | VOX (Voice-Operated Transmission). |
| DW | Dual Standby. |
| HO | Monitor Function Enabled. |
| ♪ | Side Tone Enabled. |
| 🔒 | Keypad Lock. |
| RSSI | Signal Strength. |
| A/B | A/B Band. |
| VOL | Transmit Audio Volume. |
| 🔋 | Battery Status. |
4.3. Advanced Features
4.3.1. Bluetooth Mobile App Programming
The HI-E380 can be programmed wirelessly via a mobile app, eliminating the need for complex cables.
- Ensure Bluetooth is enabled on your radio (Menu 49: BLUETOOTH ON).
- Download the 'walkie-talkie' app by scanning the QR codes below or searching in your app store.
- Open the app and connect to your HI-E380 via Bluetooth.
- Once connected, you can read and write channel information, frequency modes, and other optional settings directly from your phone.

4.3.2. Frequency Sweep Function / Wireless Copy Frequency
This function allows you to seek frequencies and sub-tones of nearby radios or quickly replicate frequencies between devices.
- Assign PF2/PF3 buttons as SEARCH from Menu 24-26.
- Press the assigned PF button until the LCD displays "SEARCH/SEEK...".
- Press the OK button to select the frequency band (UHF/VHF/200M/300M).
- After capturing a frequency, it will continue to seek sub-tone CTCSS/DCS. If no sub-tone is found, the LCD will display "NONE."
- Press the [MENU] key to save the frequency to a specified channel, or press the UP or DOWN key to start the next frequency scan.

4.3.3. NOAA Weather Channel Function
Stay informed with NOAA weather alerts and updates (for USA, Canada, and Mexico).
- Define a PF button as NOAA from Menu 24-26.
- Press the designated side key to activate this function. The radio has 10 built-in fixed frequencies.
- Use the UP/DOWN keys to select the frequency you want to listen to.

4.3.4. DTMF Encode Sending
Fast Operation: Press and hold the PTT button while entering number keys 0-9, MENU, UP, DOWN, EXIT, *, and #. The radio will transmit DTMF codes 0-9, A, B, C, D, *, and #. Release the button to stop sending codes.
Editing DTMF Code: In standby mode, short press the [#] button to enter the DTMF code editing interface. You can enter codes 0-9, OK, UP, DOWN, Exit, *, and # via the keypad. Press PTT to send the DTMF code.

4.3.5. PTT-ID Function
Transmit identity codes or call codes via DTMF. There are 15 sets of call codes, configurable through "Programming Software → Edit → DTMF". Each signal or A/B band can independently select the call code group to be sent.
Configure identity code parameters via "Programming Software → Edit → DTMF → Local ID Code". There are three transmission methods:
- Send on Press: After pressing the PTT, the call code/identity code is sent first, followed by the voice signal.
- Send on Release: After releasing the PTT, the call code/identity code is sent, then the transmission ends.
- Send Both: The call code/identity code is sent both when the PTT is pressed and released.
Note: Since the identity code operation is independent of the call code, if there is a conflict between the identity code and the call code settings, the identity code will be sent.
4.3.6. Intelligent Noise Reduction
This feature ensures clear voice communication even in noisy environments, improving communication efficiency. Enable/disable via Menu 47: NOISE REDUCTION.

4.3.7. Spectrum Analyzer
The built-in spectrum analyzer provides rich spectrum information and analysis functions, helping to solve signal interference problems and improve communication quality and efficiency.

4.3.8. Shortwave Reception
The HI-E380 supports ShortWave (SW) band reception, giving you access to a broader range of communications and broadcasts. To access the shortwave interface, assign the PF3 side key as the shortcut to enter shortwave, then press PF3 briefly. Alternatively, press and hold '0' to enter the shortwave interface.

4.3.9. Channel Zone Function
Organize and manage your channels efficiently with Zone grouping, making it easier to switch between different user groups or operations. The radio supports 64*15 zone channels.
4.3.10. Other Features
- 10W Tri-power: Adjustable High, Middle, Low power modes.
- 8.33KHz Aviation Frequency Step: For precise tuning in aviation bands.
- Dual PTT: For flexible transmission control.
- SOS Function: For emergency signaling.
- Scrambler: Voice scrambler function (Menu 46) to prevent unauthorized listening.
- 1750Hz Tone: For repeater access.
- English/Russian Machine Language: Selectable language options (Menu 21).
5. Maintenance
To ensure optimal performance and extend the lifespan of this product, please follow these guidelines:
5.1. Daily Maintenance
- Do not pierce or scratch the product with hard objects.
- Do not store the product in environments containing chemical corrosive substances.
- Do not carry or use the product by pulling the earphone cable.
- When not using the earphone jack, cover the interface with the protective cap.
5.2. Cleaning Procedure
Before cleaning, please power off the device and remove the battery:
- Regularly use a dry, clean, lint-free cloth or a soft brush to remove dust from the product surface and charging terminals.
- If the buttons or casing become dirty, use a neutral detergent and a non-woven cloth for cleaning. Do not use detergents, alcohol, sprays, or petroleum-based chemicals as they may damage the surface casing.
- After cleaning, ensure the product is completely dry before use.
6. Troubleshooting
If you encounter issues with your HIROYASU HI-E380, refer to the following common problems and solutions:
- No Power: Check if the battery is properly installed and charged. Ensure the power knob is turned on.
- Cannot Transmit/Receive: Verify the antenna is securely attached. Check the selected frequency and channel settings. Ensure the battery has sufficient charge.
- Poor Audio Quality: Check for proper microphone and headphone connections. Ensure the noise reduction feature is not overly aggressive if experiencing muffled audio.
- Keypad Locked: Long press the '#' key to unlock the keypad.
- Bluetooth Connection Issues: Ensure Bluetooth is enabled on both the radio and your mobile device. Restart both devices and try pairing again. Check app permissions for Bluetooth access.
- Programming Errors: Double-check frequency and channel settings in the programming app before writing to the radio.
If the problem persists, consult the full user manual (PDF) or contact customer support.
7. Specifications
| Attribute | Value |
|---|---|
| Brand Name | HIROYASU |
| Model Number | HI-E380 |
| Output Power (w) | 5w-10w |
| Battery Capacity (mAh) | 2200 |
| Waterproof / Water-Resistant | No |
| Battery Included | Yes |
| Material | Plastic |
| Storage Channel | 960 |
| Frequency Range | 108-136mhz, 144-148MHz, 156-163MHz, 2.3-30Mhz, 220-260 MHz, 27Mhz, 300-390MHz, 400-520MHz, 430-440 MHz, 446MHz, 462-467MHz, 470-600MHz, 520-1710Khz, 65-108mhz, 400-470mhz, 136-174 MHz |
| Dimensions | 330*45*56mm (Antenna Included) |
| Walkie Talkie Type | Portable |
| Is_Display | Yes |
| Maximum Range | 5km-10km |
| Use | Outdoor |
| Origin | Mainland China |
| Certification | CE, FCC, RoHS |
| FCC ID | 2BN9A-BT11 |

8. User Tips
- Bluetooth Programming: While convenient, some users have reported initial difficulties with Bluetooth connectivity. Ensure your radio's Bluetooth is 'ON' in the menu and try restarting both the radio and your phone if connection issues arise.
- Antenna Selection: The standard antenna covers FM/136-174/400-470MHz. For frequencies outside this range (e.g., 27MHz CB or 50MHz), a specialized, compatible antenna must be purchased separately for optimal performance.
- Manual Clarity: If parts of the included printed manual are unclear, refer to the comprehensive digital user manual (PDF) for more detailed explanations and diagrams.
9. Frequently Asked Questions (FAQ)
- Q: Can I purchase the batteries separately?
- A: Please check with the seller or authorized distributors for separate battery purchases.
- Q: What is the power output at 27 MHz?
- A: The radio has an output power of 5W-10W across its supported frequency ranges. For specific power output at 27 MHz, refer to the detailed specifications or contact technical support.
- Q: Does it support TX and RX on FM for 30-50 MHz for ham use?
- A: The frequency range includes 2.3-30MHz (RX only for SW/MW/LW), 18-30MHz (FM Tx & RX, AM RX), and 50-54MHz (6 Meters). Please refer to the detailed frequency band list in the specifications for exact TX/RX capabilities on specific FM frequencies within the 30-50 MHz range.
10. Warranty & Support
10.1. Warranty Terms
The warranty period for this product starts from the date of sale (based on the date on the sales invoice). The main unit is covered for 12 months, and the battery and charging accessories are covered for 6 months. The following cases will require paid repair services during the warranty period:
- Failure to present this warranty card and the purchase invoice.
- This card shows signs of alteration or does not match the product.
- Defects and damages caused by using this product under non-standard conditions.
- Defects and damages caused by misuse, accidents, water ingress, or negligence.
- Defects and damages resulting from improper testing, operation, repair, installation, modification, or adjustment.
- Defects and damages caused by unauthorized repairs or disassembly.
- Defects and damages caused by force majeure.
- Normal wear and tear from regular use.
This warranty card serves as an important proof for the end user to enjoy warranty services. It must be stamped and filled out completely by an authorized dealer to be valid. Please keep it safe.
10.2. Further Support
For additional assistance, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official HIROYASU support channels.