1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your LEEOCAR 9-inch Android 14 Car Multimedia Player. Please read this manual thoroughly before installation and use to ensure proper function and safety.
Compatibility Note: This unit is designed for Toyota Camry models from 2006 to 2011. It does NOT work with models equipped with the JBL High Line Deluxe System unless a specific high-end wiring harness is purchased separately.

Figure 1.1: LEEOCAR Multimedia Player installed in a Toyota Camry dashboard. Note the 'Before' and 'After Installed' views, and a warning regarding JBL High Line Deluxe Systems.
2. Package Contents
Please check the package carefully to ensure all items are present:
- 1 x 9-inch Android Car Radio Unit
- 1 x Radio Frame (for Toyota Camry fitment)
- 1 x GPS Antenna
- 1 x Power Cable Harness
- 1 x Radio Antenna Adapter
- 2 x USB Cables (4-pin and 6-pin)
- 1 x RCA Input/Output Harness
- 1 x Reversing Line
- 1 x User Manual (this document)
- 1 x Backup Camera (Optional, if purchased)
- 1 x Crowbar (for trim removal)

Figure 2.1: Visual representation of all items included in the package.
3. Installation Guide
Important: Always disconnect the vehicle's battery before starting any installation work to prevent electrical damage or injury.
3.1. Confirming Your Camry Version
Before installation, it is crucial to identify if your Toyota Camry has a JBL sound system. This will determine the correct wiring harness to use.
- Without JBL: The original radio will not have a 'JBL' logo. The back of the original radio should have a socket configuration similar to the 'Fit' example below.
- With JBL: The original radio will have a 'JBL' logo. This system requires a high-end wiring harness (XC-1637) which is sold separately. The back of the original radio will have a different socket configuration ('Not Fit' example below).

Figure 3.1: Guide to confirm your Toyota Camry's audio system (JBL vs. Non-JBL) by checking the radio's front panel and rear connectors.
3.2. Radio Rear Panel Pinout Diagram
Familiarize yourself with the connections on the rear of your new multimedia player.

Figure 3.2: Rear panel pinout diagram and overall dimensions. Key connections are: 1. Power Cable, 2. RCA Cable, 3. USB Cable 1, 4. USB Cable 2, 5. CAM-IN Wire, 6. Radio Antenna, 7. GPS Antenna.
3.3. Radio Wiring Diagram
This diagram illustrates the general wiring connections for the unit. Refer to the 'Wiring Harness Connection Tutorial' for specific steps.

Figure 3.3: Detailed radio wiring diagram. This image also includes a warning about the CANBUS box and checking for missing accessories.
3.4. Wiring Harness Connection Tutorial
Note: Do not connect wiring while power is on. Doing so may result in system errors, fuse damage, or permanent malfunction. Always disconnect the battery before installation.
Connect the provided wiring harnesses to the corresponding ports on the car radio and your vehicle's factory wiring. Only connect the plugs labeled on the original car radio. The remaining plugs do not need to be connected.

Figure 3.4: Dimension and Interface overview, showing the ISO plug for fast wiring and various input/output ports.
For vehicles with a JBL audio system, use the XC-1637 harness. Connect the 10-Pin Reversing Cable if you are retaining the factory camera.
4. Initial Setup and Configuration
4.1. Steering Wheel Controls Setup
To configure your steering wheel controls:
- Go to Car Settings → Factory (password: 000000) → CarType Setting, and select 'NO Canbus'.
- Then go to Car Settings → General → SWC Type, and select 'Learning Type'.
- Tap 'Enter SWC setting interface' and follow the on-screen instructions to manually program your steering wheel control (SWC) keys.

Figure 4.1: Steering Wheel Controls learning interface.
4.2. Custom Boot Logo/Startup Logo
- Download your desired image (resolution 1280x720, PNG format).
- Rename the image to 'zxdzlogo'.
- Place it in the root directory of a USB drive and insert it into the device.
- Go to Settings → System → About device → Local Update, select the logo and start the upgrade.
- After the upgrade, go to Car Settings → Factory (password: 000000) → Dedicated logo settings → Boot Screen Logo to change the logo.
4.3. Setting Date and Time
Ensure your GPS antenna is properly connected (on the A-pillar or outside the dash). Connect your radio to Wi-Fi or a hotspot, then go to Settings → System → Date and Time, and enable 'Use network provided time' and 'Use network-provided time zone.'
4.4. Wi-Fi Connection
The unit supports Wi-Fi internet access. Go to Settings → Network & Internet → Wi-Fi, turn Wi-Fi on, and select your desired network to connect.

Figure 4.2: Wi-Fi internet access allows installation of various applications.
4.5. Wireless CarPlay / Android Auto (via Zlink)
- Turn on Wi-Fi and Bluetooth on your phone.
- On the radio, open the Bluetooth Phone app and find the corresponding Bluetooth device name. The PIN code is 0000.
- On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code: 0000, and complete the pairing.
- For iPhone: Tap 'Use CarPlay' when prompted, and set the device type as Car Stereo.
- For Android: Make sure Location is turned on and your phone supports wireless Android Auto (Android 11 or above is recommended).
- Open the ZLINK app on the car radio. CarPlay or Android Auto should launch automatically.

Figure 4.3: CarPlay and Android Auto integration.
4.6. Mirror Link (via Zlink)
For iOS (Wireless Mirroring)
- Open the ZLINK app on the car stereo and select 'Wireless Mirroring'.
- Enable your phone's cellular data and personal hotspot, and allow others to join.
- Connect the car stereo's WiFi to the personal hotspot.
- Swipe down from the top of your phone screen to access the control center, tap 'Screen Mirroring,' and select 'zj-airplay' to pair.
For Android (Wireless Mirroring)
- On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter PIN 0000, and complete pairing.
- Open the ZLINK app on the radio and select 'Wireless Mirroring'.
- Scan the QR code to download the 'zPlus' app.
- Enable your phone's hotspot and connect the radio's WiFi to the phone hotspot.
- Open the 'zPlus' app on your phone, select 'Wireless Connection' to start mirroring.

Figure 4.4: Mirror Link functionality for Android and iPhone.
5. Operating Instructions
5.1. Radio (FM with RDS)
The unit supports FM radio with RDS (Radio Data System). You can store up to 18 FM radio stations.
- Frequency Range: FM 87.5 - 108.0 MHz.
- RDS Features: RT (Radio Text), AF (Alternative Frequencies), TA (Traffic Announcement) provide additional information and improved listening experience.

Figure 5.1: FM Radio interface.
5.2. Bluetooth Function (Version 4.1)
Bluetooth 4.1 allows for hands-free calling and music playback, enhancing driving safety.
- Hands-free Calling: Access your phone book and make calls directly from the unit.
- Music Playback: Stream audio from your Bluetooth-enabled device.

Figure 5.2: Bluetooth function for calls and music.
5.3. GPS Navigation
The unit supports both online and offline GPS navigation. Ensure the GPS antenna is properly installed for optimal signal reception.
- Online Navigation: Connect to Wi-Fi/hotspot and use apps like Google Maps, Waze, etc.
- Offline Navigation: Download maps to the unit's internal storage via Wi-Fi, then use them without an internet connection.

Figure 5.3: GPS Navigation interface.
5.4. Multimedia Playback
The unit supports various audio and video formats for playback from USB drives or internal storage.
- Audio Formats: MP3, FLAC, APE, WMA, WAV, AAC, AMR.
- Video Formats: AVI, ASF, MP4, MOV, MPG, MPEG1/2/4, VOB, MKV, FLV, TS, WMV, RMVB, 3GP.

Figure 5.4: Multiple User Interface Options, including multimedia playback screens and sound settings.
5.5. Backup Camera Function (Optional)
If a backup camera is connected, the unit will automatically display the rear view when the vehicle is shifted into reverse gear, enhancing safety.
- Supports AHD cameras.
- Camera is optional and may be purchased separately.

Figure 5.5: Backup Camera Function display.
5.6. Sound Settings (EQ)
The unit features a 16-band EQ adjustment and 4x45W amplifiers for customizable sound output, including surround sound and subwoofer output.

Figure 5.6: Dynamic Sound EQ interface.
6. Maintenance
To ensure the longevity and optimal performance of your multimedia player, follow these simple maintenance guidelines:
- Cleaning the Screen: Use a soft, lint-free cloth (microfiber is recommended) to gently wipe the screen. For stubborn smudges, slightly dampen the cloth with water or a screen-cleaning solution specifically designed for electronics. Avoid using harsh chemicals, abrasive cleaners, or paper towels, as these can scratch or damage the screen.
- General Cleaning: Use a soft, dry cloth to wipe the unit's frame and buttons. Avoid spraying liquids directly onto the unit.
- Environmental Conditions: Keep the unit away from extreme temperatures, direct sunlight for prolonged periods, and excessive moisture.
- Software Updates: Periodically check for software updates (if available from the manufacturer) to ensure optimal performance and access to new features.
7. Troubleshooting (FAQs)
7.1. General Issues
- Factory Password: The default factory password is 000000.
- Freezing/Stuttering: If the radio experiences issues like freezing or stuttering, go to Settings → System → Reset options → Erase all data (factory reset).
- Original Car Protocol Information Errors: Select the corresponding car model in the car model protocol selection chart. Connect the radio to the internet, then go to Car settings → System → CAN Apk Update to complete the upgrade.
7.2. Camera Related Issues
- Rear Camera Image Reversed (Left to Right): Go to Car Settings → General and toggle the 'Rear Mirror' option to adjust.
- Factory Rear Camera Image Not Clear: Factory rear cameras often use CVBS (360P) while this radio supports AHD (1080P). For better image quality, use the supplied AHD camera.
- Turn Off Camera Guideline: Go to Car Settings → General and turn off 'Reverse Line'.
7.3. Audio and Connectivity
- Sirius XM Radio Support: The radio does not have a port for connecting a SiriusXM tuner. Check the Play Store for online SiriusXM apps, but compatibility is not guaranteed.
- Factory Microphone Support: The factory microphone cannot be retained. Connect the external microphone to the 3.5mm port on the RCA cable. Install the microphone on the driver's side sun visor, facing the driver.
- Voice Assistant (Siri, etc.): Voice assistants are activated through your phone. Connect your phone to the radio via Bluetooth, Android Auto, or CarPlay to use the voice assistant feature.
- Unstable WiFi Connection: Verify that the single yellow RCA camera port is properly connected to the radio, as adjacent small wires are for Wi-Fi and Bluetooth signals. Note that Bluetooth and Wi-Fi cannot be used at the same time.
8. Specifications
| Feature | Specification |
|---|---|
| Operating System | Android 14 |
| Display Size | 9 inches |
| Display Resolution | 1280x720 IPS Capacitive Touch Screen |
| CPU | Quad-core Cortex A53 1.5GHz |
| RAM | 2GB |
| ROM (Internal Storage) | 32GB |
| Radio Tuner | FM with RDS (87.5M-108M) |
| Bluetooth Version | 4.1 |
| Output Power | 4 x 45W |
| Voltage | 12V |
| Special Features | WiFi, 4G Network Support (via dongle), Built-in GPS, Split Screen, MP3 players, CarPlay, Voice Control, Android Auto, DSP, Reversing Input, Steering Wheel Control, Can-Bus Support |
| Digital Media Format | MP4, MP3, WMA, JPEG |
| OSD Language | Multi-language support (including English, German, French, Spanish, etc.) |
| Item Weight | 2.5kg |
| Certification | CE, FCC, WEEE, EAC, RoHS, KC |
9. User Tips
- GPS Antenna Placement: For best GPS signal reception, mount the GPS antenna on the A-pillar or just outside the dashboard, avoiding placement inside the dash.
- Microphone Installation: When installing the external microphone, place it on the driver's side sun visor, with the microphone head facing the driver, for optimal voice pickup during calls.
- JBL System Awareness: Always double-check if your vehicle has a JBL sound system before installation, as it requires a specific wiring harness.
- Software Updates: Keep your unit's software updated for the latest features and performance improvements.
10. Support and Warranty
For technical support, warranty information, or any issues not covered in this manual, please refer to the seller's contact information or the official product support channels. The product typically comes with a 1-year warranty.
You can access additional technical support and function manuals by scanning the QR code provided in the original instruction manual (if available).