LEEOCAR 10.1 inch Android 15 Car Radio for Toyota Camry

Contents

LEEOCAR 10.1" Android 15 Car Radio User Manual

For Toyota Camry 7 XV 50 55 (2012-2017)

Product Overview

The LEEOCAR 10.1-inch Android 15 Car Radio is a multimedia car player designed for Toyota Camry models from 2012 to 2017. It features a 10.1" 1280x720 2.5D IPS capacitive touchscreen, offering a seamless and user-friendly infotainment experience. This unit supports Apple CarPlay and Android Auto, GPS navigation, Wi-Fi connectivity, Bluetooth, and steering wheel controls. It comes with a CANBUS system for real-time vehicle information synchronization.

LEEOCAR 10.1 inch Android 15 Car Radio installed in a Toyota Camry dashboard, displaying a CarPlay interface.
The 10.1-inch Android 15 Car Radio seamlessly integrated into a Toyota Camry dashboard, showcasing its CarPlay interface.
LEEOCAR 10.1 inch Android 15 Car Radio with key features highlighted: Android 15, 4GB+64GB, 10 inch IPS Touchscreen, CarPlay, Android Auto, Bluetooth, WiFi, GPS NAV, SWC, FM Radio, Reversing.
Key features of the LEEOCAR 10.1-inch Android 15 Car Radio.

Setup and Installation

This section provides instructions for installing your new car radio. It is recommended to disconnect the car battery before starting any wiring to prevent system errors or damage.

1. What's Included in the Package?

Verify that all components are present in your package:

Diagram showing the contents of the product package: Radio Frame, Power Cable & Canbus Box & USB Cable, Power Cable & USB Cable, RCA Harness Cable, Reverse Line & GPS Antenna, Instruction manual, USB Cable (6pin).
Package Contents
  • 1 x 2 DIN Car Radio
  • 1 x Radio Frame
  • 1 x GPS Antenna
  • 1 x Power Cable & Canbus Box & USB Cable
  • 1 x RCA Connection Cable
  • 1 x USB Cable (6pin)
  • 1 x Reverse Line
  • 1 x Installation Instructions

Optional accessories (not included): AHD Rear View Camera, Dash Camera, DAB BOX2.

2. Radio Rear Panel Pinout Diagram

Refer to the diagram below for the pinout configuration of the radio's rear panel. This is crucial for correct wiring.

Detailed diagram showing the dimensions of the car radio and its frame, along with a comprehensive pinout diagram for the rear panel. Labels include AV Cable, Power Cable, USB 1, USB 2, Radio antenna, GPS antenna, Rear View Camera input, AUX-L IN, AUX-R IN, Video input, Audio Out Rear L/R, Audio Out Front L/R, Subwoofer, and MIC.
Dimensions and Rear Panel Interfaces

3. Wiring Harness Connection Tutorial

Warning: Do not connect wiring while power is on. Doing so may result in system errors, fuse damage, or permanent malfunction. Always disconnect the battery before installation.

The CANBUS box is pre-connected to the wiring harness. Do not disconnect the CANBUS connector, as functions may be disabled.

  1. Identify the appropriate connectors for your vehicle's original car radio.
  2. Connect the plugs labeled on the original car radio. Remaining plugs do not need to be connected.
  3. For USB connectivity, use the provided 4-pin USB cable for better performance.
  4. For the rear view camera, identify the appropriate connector and connect it to the female connector on the 10-pin Reversing Cable.

4. Steering Wheel Controls Setup Tutorial

If your vehicle has a factory radio, navigate to Car Settings → Factory (password: 000000) → CarType Setting, and select "NO Canbus". Then go to Car Settings → General → SWC Type, and select "Learning Type". Tap "Enter SWC setting interface" and follow the on-screen instructions to manually program your steering wheel control (SWC) keys.

Image showing the car radio interface for steering wheel control setup, with buttons for mute, previous, next, volume up/down, home, play/pause, hangup, answer, SRC, band, back, shuffle, EQ, and navi. A note indicates that each button has functions for short and long presses.
Steering Wheel Control Interface

5. Rear Camera Wiring Tutorial

For a visual guide on connecting the rear camera, please refer to the video tutorial available via QR code in the full PDF manual or on the support website.

6. Removing Original Radio and Installing New One

For a detailed video tutorial on how to remove your original vehicle's radio and install the new LEEOCAR unit, please refer to the video tutorial available via QR code in the full PDF manual or on the support website.

Operating Instructions

1. GPS Navigation

The unit supports online and offline navigation. You can download your preferred GPS application for navigation. For offline maps, connect to Wi-Fi to download maps to the radio's internal storage first.

Car radio display showing a GPS navigation map with various navigation app icons like Here WeGo, Google Maps, and iGO.
GPS Navigation Interface

2. Wi-Fi Internet

Connect to Wi-Fi to access the internet and download applications from the App Store (e.g., YouTube, TikTok, Spotify). An independent antenna ensures strong Wi-Fi reception.

Car radio display showing various applications available with Wi-Fi internet access, including YouTube, Facebook, and other media and utility apps.
Wi-Fi Internet and App Access

3. Apple CarPlay & Android Auto

Connect your iPhone to Apple CarPlay or your Android smartphone to Android Auto for secure access to calls, texts, navigation, and music. Operate via touchscreen or voice control.

Comparison image showing Apple CarPlay and Android Auto interfaces on the car radio, with a smartphone displaying the respective app logos.
CarPlay and Android Auto Interfaces
  1. Turn on Wi-Fi and Bluetooth on your phone.
  2. On the radio, open the Bluetooth Phone app and find the corresponding Bluetooth device name (PIN code: 0000).
  3. On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code: 0000, and complete the pairing.
  4. For iPhone: Tap "Use CarPlay" when prompted, and set the device type as Car Stereo.
  5. For Android: Ensure Location is turned on and your phone supports wireless Android Auto (Android 11 or above is recommended).
  6. Open the ZLINK app on the car radio. CarPlay or Android Auto should launch automatically.

4. Bluetooth Function

Supports hands-free calling and music playback. The built-in microphone allows for safe driving communication. Access phone book and music playback interfaces.

Car radio display showing a Bluetooth music playback interface and a smartphone displaying a dial pad.
Bluetooth Functionality

Connect your smartphone to mirror its screen on the car stereo. This allows you to watch videos, navigate, and use other apps directly from your phone's display.

Diagram illustrating the Mirror Link feature, showing an Android phone and an iPhone mirroring their screens to the car stereo display.
Mirror Link Feature

For iOS (Wireless Mirroring):

  1. Open the ZLINK app on the car stereo and select "Wireless Mirroring".
  2. Enable your phone's cellular data and personal hotspot, and allow others to join.
  3. Connect the car stereo's WiFi to the personal hotspot.
  4. Swipe down from the top of your phone screen to access the control center, tap "Screen Mirroring", and select "zj-airplay" to pair and complete the wireless mirroring connection.

For iOS (Wired Mirroring):

  1. Open the "Zlink" app and switch to mirror function.
  2. Use the included 4-pin/6-pin USB cable to connect your phone.
  3. Follow the on-screen instructions.

For Android (Wireless Mirroring):

  1. Open the ZLINK app on the car stereo and select "Wireless Mirroring".
  2. Enable your phone's cellular data and personal hotspot, and allow others to join.
  3. Connect the car stereo's WiFi to the personal hotspot.
  4. Swipe down from the top of your phone screen to access the control center, tap "Screen Mirroring", and select "zj-airplay" to pair and complete the wireless mirroring connection.

For Android (Wired Mirroring):

  1. On your phone, go to Bluetooth settings, locate the radio's Bluetooth device name, enter the PIN code: 0000, and complete the pairing.
  2. Open the ZLINK app on the radio and switch to wired mirroring mode.
  3. Use the 4Pin/6Pin USB cable provided to connect the USB data cable to your phone.
  4. Open the "zPlus" app on your phone and select the connection method-"USB Connection" to establish the connection. The "zPlus" app should launch automatically.

6. DAB+/FM RDS Radio

Supports RDS and allows saving 18 FM radio stations. Provides superior sound quality, more radio channels, less signal interference, and access to digital-only stations (with optional DAB+ adapter).

Car radio display showing the DAB+/FM RDS Radio interface, with frequency range FM: 87.5~108 MHz and examples of digital radio stations.
DAB+/FM RDS Radio Interface

7. Backup Camera Function

Connect a reversing camera (optional) to automatically display the reversing image when engaging reverse gear, enhancing safety. Supports AHD cameras.

Car radio display showing a backup camera view with parking guidelines in a parking lot. A camera icon with 'Camera is optional' text is also shown.
Backup Camera View

8. UI Interface Options

The radio offers multiple user interface options for personalization.

Collage of various user interface designs and layouts available on the car radio, showing different home screens, music players, and settings menus.
Multiple User Interface Options

9. Controlling Original Vehicle Functions

After installing the new radio, you can control your vehicle's original functions by navigating to Car Info → Car settings. Only functions originally present in your vehicle can be controlled here.

Maintenance

To ensure optimal performance and longevity of your car radio, follow these general maintenance guidelines:

  • Cleaning: Use a soft, dry cloth to clean the screen and exterior. Avoid abrasive cleaners or solvents.
  • Software Updates: Periodically check for system updates to ensure you have the latest features and bug fixes. Connect the device to Wi-Fi and navigate to system settings for updates.
  • Environmental Conditions: Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

Troubleshooting

Common Issues and Solutions:

Q: Why is the factory rear camera image not clear?
A: The original factory rear camera may use CVBS (360P) signal, which is lower resolution. The new radio supports AHD (1080P). For better image quality, it is recommended to use a compatible AHD camera.
Q: How do I turn off the camera's guideline?
A: Go to Car Settings → General and turn off the "Reverse Line" option.
Q: What should I do if the radio experiences issues like freezing and stuttering?
A: Go to Settings → System → Reset options → Erase all data (factory reset).
Q: Is it possible to support Sirius XM radio?
A: The radio does not have a dedicated port for a SiriusXM tuner. You may check the radio's Play Store for online SiriusXM Radio apps, but compatibility with third-party apps cannot be guaranteed.
Q: Does it support the factory microphone?
A: The factory microphone cannot be retained. Connect the external microphone to the 3.5mm port on the RCA cable. For optimal performance, install the microphone on the driver's side sun visor, with the head facing the driver.
Q: Can I use a voice assistant (Siri, etc.)?
A: The voice assistant can only be activated through your phone. Connect your phone to the radio via Bluetooth, Android Auto, or CarPlay, then use the voice assistant feature on your phone.
Q: Why is the time not accurate?
A: Ensure your GPS antenna is properly connected. Install the GPS antenna on the A-pillar or just outside the dash. Then, connect your radio to Wi-Fi or a hotspot, go to Settings → System → Date and Time, and enable "Use network provided time" and "Use network-provided time zone".
Q: Why is the WiFi connection unstable?
A: Verify that the single yellow RCA camera port is properly connected to the radio, as the adjacent small wires are intended for receiving Wi-Fi and Bluetooth signals. Note that Bluetooth and Wi-Fi cannot be used simultaneously.
Q: What should I do if the original car protocol-related information display or the original car-related settings show errors?
A: Select the corresponding car model according to the provided car model protocol selection chart. Connect the car radio to the internet, then go to Car settings → System → CAN Apk Update to complete the upgrade.
Q: How do I change the custom boot logo/startup logo?
A: Download your desired image (resolution 1280x720, PNG format), rename it to "zxdzlogo", and place it in the root directory of a USB drive. Insert the USB drive into the device. Go to Settings → System → About device → Local Update to perform the upgrade. After the upgrade, go to Car Settings → Factory (password: 000000) → Dedicated logo settings → Boot Screen Logo to change the logo.
Q: Why is there no sound after installing the radio?
A: If your vehicle has a JBL audio system, connect the wire labeled "AMP" (as shown in the wiring diagram in the full PDF manual) to the red ACC wire on the main power harness to enable sound output. Strip a small section of insulation from each wire, twist the exposed copper wires together, and secure them with electrical tape or a suitable wire connector.

Specifications

FeatureSpecification
Operating SystemAndroid 15
Display Size10.1 inches
Screen Resolution1280 x 720 IPS Capacitive Touch Screen
CPU4x Cortex-A53 1.5GHZ
RAM4GB (Optional: 2GB)
ROM (Internal Storage)64GB (Optional: 32GB)
Out Power4*45W
Voltage12 V
Item Weight2.5kg
Tuner TypeSupport FM, AM (Optional)
Radio FrequencyFM 87.5M-108M
Bluetooth Version4.1
Digital Media FormatMP4, Mp3, WMA, JPEG
Special FeaturesWifi Function, Support 4G Network, Built-in GPS, Split Screen, MP3 players, CarPlay, Voice Control, Android Auto, DSP, Reversing Input, Support steering wheel control, Support Can-Bus
OSD LanguageMulti-language support including English, German, French, Italian, Spanish, Portuguese, Russian, Turkish, Polish, etc.
CertificationCE, FCC, WEEE, EAC, RoHS, KC
MaterialComposite Material
Max External Memory64G
InterfaceUSB/RCA
Din TypeDouble Din

User Tips

  • For optimal GPS performance, ensure the GPS antenna is installed in a location with a clear view of the sky, such as on the A-pillar or just outside the dashboard. Avoid installing it completely inside the dash.
  • When using an external microphone, consider mounting it on the driver's side sun visor, facing the driver, for clearer voice input during calls or voice commands.
  • If experiencing issues with the rear camera clarity, upgrading to an AHD camera is recommended as the unit supports higher resolution input.
  • To maintain a stable Wi-Fi connection, ensure the yellow RCA camera port is correctly connected, as it can affect Wi-Fi and Bluetooth signals.

Warranty and Support

Warranty Information

This product comes with a 1-year warranty.

Technical Support

For further assistance or to access the electronic instruction manual, you can refer to the PDF manual available at User manual (PDF). Additionally, technical support resources, including FAQs and forums, may be available on the manufacturer's official website.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.