Flipsky FT85100A-EB

Contents

Flipsky FT85100A-EB 85V 100A ESC with TFT Advanced Display V3.0 User Manual

Electronic Speed Controller for E-bikes

1. Introduction

Thank you for choosing the Flipsky FT85100A-EB Electronic Speed Controller (ESC) with TFT Advanced Display V3.0. This high-performance ESC is designed for electric bicycles (e-bikes), offering precise control over motor speed and braking. It features PWM variable frequency control and supports brake signal input, ensuring a smooth and responsive riding experience. This manual provides essential information for the safe and efficient use of your new ESC.

Flipsky FT85100A-EB ESC with TFT Display
Figure 1: Flipsky FT85100A-EB ESC with TFT Advanced Display V3.0

2. Safety Information

Please read and understand all safety warnings and instructions before installation and operation. Failure to do so may result in property damage, serious injury, or death.

  • Always disconnect the battery before performing any installation, maintenance, or wiring changes.
  • Ensure all connections are secure and correctly polarized to prevent short circuits and damage to components.
  • Operate the ESC within its specified voltage and current limits.
  • Avoid exposing the ESC to water, excessive moisture, or extreme temperatures.
  • Keep hands and loose clothing away from moving parts of the e-bike during operation.
  • Seek professional assistance if you are unsure about any installation or wiring procedures.

3. Package Contents

Verify that all items are present in your package:

  • Flipsky FT85100A-EB ESC
  • TFT Advanced Display V3.0
  • Connection Cables (Motor, Battery, Throttle, Brake, Display)
  • Mounting Hardware (Screws, brackets, etc.)
  • User Manual (this document, or a printed version)

4. Specifications

Feature Specification
Brand Flipsky
Model FT85100A-EB
Type ESC
Voltage 85V (Max)
Current 100A (Continuous)
Display TFT Advanced Display V3.0
Control Features PWM Variable Frequency Control, Brake Signal Support
Customization Yes
High-concerned chemical None
Origin Mainland China

Note: Specifications are subject to change without prior notice.

5. Setup Instructions

Follow these steps to properly install and connect your Flipsky FT85100A-EB ESC to your e-bike system.

  1. Mounting the ESC: Securely mount the ESC to your e-bike frame in a location that is protected from physical damage, moisture, and allows for adequate airflow for cooling. Use the provided mounting hardware.
  2. Battery Connection: Connect the main power cables from your battery to the ESC. Ensure correct polarity (positive to positive, negative to negative). Incorrect connection will damage the ESC and battery.
  3. Motor Connection: Connect the three phase wires from your motor to the corresponding terminals on the ESC. For sensorless motors, the order may not be critical initially, but for sensored motors, ensure sensor wire connections are also correct.
  4. Display Connection: Connect the TFT Advanced Display V3.0 to the designated port on the ESC. This connection typically provides power to the display and enables communication for data and control.
  5. Throttle Connection: Connect your e-bike's throttle to the throttle input port on the ESC.
  6. Brake Signal Connection: If your e-bike has brake levers with integrated sensors, connect the brake signal wires to the appropriate input on the ESC. This enables the ESC to cut power or apply regenerative braking when the brakes are engaged.
  7. Initial Configuration: After all connections are made, power on the system. The TFT display will likely guide you through an initial setup or calibration process. This may include motor detection, setting battery voltage, wheel size, and other parameters. Refer to the display's specific instructions for detailed configuration.

Important: Double-check all connections before applying power to prevent damage.

6. Operating Instructions

Once installed and configured, operating your ESC is straightforward via the TFT Advanced Display.

  1. Power On/Off: Turn on your e-bike's main power switch. The TFT display should illuminate and show system information. To power off, use the main power switch.
  2. Display Navigation: Use the buttons on the TFT display to navigate through different screens and settings. Common screens include speed, battery level, trip distance, and power output.
  3. Speed Control: Use the throttle to control the motor's speed. Apply throttle gradually for smooth acceleration.
  4. Brake Function: Engaging the brake levers will send a signal to the ESC, which will cut power to the motor and may initiate regenerative braking, depending on your configuration.
  5. Mode Selection: The TFT display may offer different riding modes (e.g., Eco, Sport, Custom). Select the desired mode using the display controls to adjust power delivery and performance characteristics.
  6. Parameter Adjustment: Advanced settings such as current limits, voltage cutoffs, and motor parameters can typically be adjusted through the display's menu. Exercise caution when changing these settings.

7. Maintenance

Regular maintenance helps ensure the longevity and optimal performance of your ESC.

  • Cleaning: Periodically clean the exterior of the ESC and display with a dry, soft cloth. Avoid using solvents or harsh chemicals. Ensure no dust or debris accumulates in cooling fins or ports.
  • Connection Inspection: Regularly check all wiring connections for tightness and signs of wear or corrosion. Loose connections can lead to intermittent performance or damage.
  • Firmware Updates: Check the Flipsky official website for any available firmware updates for your ESC and display. Follow the provided instructions carefully for any update procedures.
  • Environmental Protection: Protect the ESC from direct exposure to rain, snow, or extreme heat. If riding in wet conditions, ensure the ESC is adequately protected.

8. Troubleshooting

This section addresses common issues you might encounter with your Flipsky FT85100A-EB ESC.

Problem Possible Cause Solution
ESC/Display not powering on Loose battery connection, discharged battery, faulty power switch. Check battery connections, charge battery, inspect power switch.
Motor not responding to throttle Loose motor/throttle connection, incorrect motor detection, throttle calibration issue. Verify motor and throttle connections, re-run motor detection/calibration via display.
Display shows error code Over-voltage, under-voltage, over-current, motor hall sensor error. Consult the display's manual for specific error code meanings. Check battery voltage, motor connections.
Intermittent power/performance Loose connections, overheating, damaged wiring. Inspect all wiring and connectors. Ensure adequate cooling for the ESC.

User Tips:

  • Start with default settings: For initial rides, use the default or 'Eco' mode to familiarize yourself with the e-bike's power delivery.
  • Monitor battery voltage: Keep an eye on the battery voltage displayed to avoid deep discharge, which can damage your battery.
  • Smooth throttle input: Apply throttle smoothly to prevent sudden jerks and maximize efficiency.
  • Regular checks: Before each ride, quickly check that all cables are secure and the display is functioning correctly.

9. Warranty and Support

For warranty information, technical support, or service inquiries, please contact Flipsky customer service or refer to the official Flipsky website. Keep your proof of purchase for warranty claims.

10. Additional Resources

For a more detailed guide and specific diagrams, you may refer to the official PDF user manual:

View Official User Manual (PDF)

© 2023 Flipsky. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.