KAVERY 079 919 523 J

Contents

Engine Coolant Temperature Sensor

Model: 079 919 523 J | Brand: KAVERY

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of your KAVERY Engine Coolant Temperature Sensor. This sensor is designed to accurately measure the temperature of the engine coolant, providing critical data to the engine control unit (ECU) for optimal engine performance and fuel efficiency.

Product Name: Engine Coolant Temperature Sensor

Brand: KAVERY

Origin: Mainland China

2. Specifications

Attribute Value
OEM NO. 079 919 523 J
Manufacturer Part Number 079 919 523 D
Other Part Number 06K 919 525
SKU 06H121026
Placement on Vehicle Engine
High-concerned chemical None
Country/Region of Manufacture China

Package Dimensions:

  • Length: 7 cm
  • Width: 5 cm
  • Height: 5 cm
  • Weight: 0.02 kg

3. Package Contents

The package typically includes:

  • 1 x KAVERY Engine Coolant Temperature Sensor (OEM: 079 919 523 J)
Front view of the coolant temperature sensor with its packaging box.
Front view of the coolant temperature sensor with its packaging box.

4. Installation

The KAVERY Engine Coolant Temperature Sensor is designed for easy installation. However, professional installation is recommended for optimal performance and safety.

General Installation Steps:

  1. Safety First: Ensure the engine is cool and the vehicle's battery is disconnected before beginning any work.
  2. Locate the Sensor: Identify the old coolant temperature sensor on your engine. It is typically located near the thermostat housing or on the engine block.
  3. Drain Coolant: Partially drain the engine coolant to a level below the sensor's location to prevent spillage.
  4. Remove Old Sensor: Carefully disconnect the electrical connector from the old sensor. Use an appropriate wrench or socket to unscrew and remove the old sensor.
  5. Prepare New Sensor: Ensure the new KAVERY sensor has a new O-ring or gasket. Apply a thin layer of coolant or appropriate lubricant to the O-ring.
  6. Install New Sensor: Thread the new sensor into its mounting location by hand to avoid cross-threading. Tighten it with a wrench to the manufacturer's specified torque (refer to your vehicle's service manual).
  7. Reconnect: Reconnect the electrical connector to the new sensor, ensuring it clicks securely into place.
  8. Refill Coolant: Refill the cooling system with the correct type and amount of coolant. Bleed any air from the system as per your vehicle's service manual.
  9. Test: Reconnect the battery, start the engine, and check for leaks. Monitor the engine temperature gauge to ensure proper operation.
Close-up view of the coolant temperature sensor's electrical connector (plug positions).
Detail of the sensor's electrical connector (plug positions).
Image of a mechanic working on a car engine, indicating compatibility for Audi, VW, and Porsche parts.
The sensor is compatible with various Audi, VW, and Porsche models.

5. Operation

The Engine Coolant Temperature Sensor continuously monitors the temperature of the engine's coolant. This information is crucial for:

  • Engine Management: The ECU uses temperature data to adjust fuel injection, ignition timing, and idle speed for optimal performance and emissions.
  • Cooling Fan Activation: Ensures the cooling fan activates at the correct temperature to prevent engine overheating.
  • Temperature Gauge: Provides the temperature reading displayed on your vehicle's dashboard.

Once installed, the sensor operates automatically as part of your vehicle's engine management system.

Video showcasing a 360-degree view of the KAVERY Engine Coolant Temperature Sensor.

6. Maintenance

Engine coolant temperature sensors are generally maintenance-free components. However, regular checks of your vehicle's cooling system can help ensure its longevity and proper function:

  • Coolant Level: Regularly check and maintain the correct coolant level in your reservoir.
  • Coolant Quality: Ensure the coolant is clean and free from contaminants. Replace coolant according to your vehicle manufacturer's recommendations.
  • Wiring Inspection: Periodically inspect the sensor's wiring and connector for any signs of damage, corrosion, or loose connections.
  • Leak Checks: Look for any signs of coolant leaks around the sensor or other cooling system components.

7. Troubleshooting

If you suspect an issue with your coolant temperature sensor, consider the following common symptoms and potential solutions:

Symptom Possible Cause Solution
Engine Overheating Faulty sensor sending incorrect low temperature readings, preventing cooling fan activation. Check sensor readings with a diagnostic tool. Replace if faulty. Ensure proper coolant level.
Poor Fuel Economy Sensor sending incorrect cold temperature readings, causing the ECU to enrich the fuel mixture. Verify sensor output. Replace if readings are consistently inaccurate.
Check Engine Light (CEL) Sensor failure or circuit issue detected by the ECU. Retrieve diagnostic trouble codes (DTCs) using an OBD-II scanner. Address the specific code.
Erratic Temperature Gauge Intermittent sensor failure or poor electrical connection. Inspect wiring and connector for corrosion or damage. Test sensor continuity and resistance.

If troubleshooting steps do not resolve the issue, consult a qualified automotive technician.

8. User Tips

  • Always use the correct type of coolant specified for your vehicle to prevent damage to the cooling system components, including the sensor.
  • When replacing the sensor, ensure the engine is completely cool to avoid burns from hot coolant or engine components.
  • Double-check all electrical connections to ensure they are secure and free from corrosion after installation.

9. Safety Warnings

WARNING!

  • This product contains small parts and is not suitable for children under 36 months due to choking hazard. Keep out of reach of children.
  • Always wear appropriate personal protective equipment (PPE) such as gloves and eye protection when working on your vehicle's engine or cooling system.
  • Engine coolant is toxic. Avoid ingestion and contact with skin. Dispose of used coolant responsibly according to local regulations.
  • Working on vehicle systems can be dangerous. If you are unsure about any step, seek assistance from a certified mechanic.

10. Warranty and Support

This KAVERY Engine Coolant Temperature Sensor comes with a 2-year warranty against manufacturing defects.

For technical support or warranty claims, please contact the seller or manufacturer directly. Ensure you have your purchase details and product information readily available.

For additional information and documents, you may refer to the official user manual PDF: View User Manual (PDF)

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.