1. Product Overview
This manual provides instructions for the installation, operation, and maintenance of the rear fender and integrated taillight designed for the Xiaomi 5 Plus electric scooter. This component serves to protect against mud and water splashes and includes a functional taillight for enhanced visibility and safety.

Figure 1: Rear Fender with Integrated Taillight
2. Safety Information
- Always ensure the scooter is powered off and disconnected from any charging source before performing installation or maintenance.
- Wear appropriate safety gear, such as gloves, if necessary.
- Verify model compatibility before installation to ensure proper fit and function.
- Keep packaging materials away from babies and children to avoid suffocation hazards. Do not use plastic bags in cribs, beds, carriages, or playpens. This bag is not a toy.
3. Installation Guide
This rear fender and taillight assembly is a replacement part. Installation typically involves removing the existing fender and attaching the new unit. Refer to the product diagrams for specific details.
3.1. Tools Required
- Screwdriver (appropriate type for your scooter's fender screws)
- Small wrench (if nuts are used)
3.2. Installation Steps
- Prepare the Scooter: Power off your Xiaomi 5 Plus electric scooter and place it on a stable surface.
- Remove Existing Fender (if applicable): Carefully unscrew and detach the old rear fender. Disconnect any wiring connected to the old taillight.
- Position the New Fender: Align the new rear fender with the mounting points on your scooter's frame.
- Secure the Fender: Insert and tighten the screws to firmly attach the fender to the scooter. Do not overtighten.
- Connect the Taillight Wiring: Locate the taillight connector on the new fender (see Figure 2). Connect this to the corresponding wiring harness on your scooter. Ensure the connection is secure.
- Test Functionality: Power on your scooter and test the taillight. Verify that it illuminates correctly when the lights are activated and/or when the brake is applied (if it functions as a brake light).

Figure 2: Rear Fender Underside with Mounting Points and Taillight Connector. The image highlights the function of rear fenders in preventing mud and water splashing, and shows the internal structure and the electrical connector for the taillight.

Figure 3: Taillight and Wiring Connector Detail. This image shows the red and black wires leading to a white two-pin connector.
4. Operation
The rear fender operates passively by deflecting mud and water away from the rider and the scooter's components. The integrated taillight functions as part of the scooter's electrical system, providing rear illumination for safety. Its operation is controlled by the scooter's main light switch and/or brake lever, depending on the scooter's design.
5. Maintenance
- Cleaning: Regularly clean the fender and taillight with a damp cloth to remove dirt and debris. Avoid using harsh chemicals that may damage the plastic.
- Inspection: Periodically inspect the fender for cracks, damage, or looseness. Check the taillight for proper function and ensure its wiring connection remains secure.
- Tightness: Ensure all mounting screws are tight. Retighten if any looseness is detected.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Taillight not working | Loose or disconnected wiring; scooter electrical issue; damaged taillight. | Check and secure the wiring connection. Verify scooter's electrical system. If still not working, the taillight may need replacement. |
| Fender is loose or rattling | Mounting screws are loose. | Tighten all mounting screws. |
| Excessive mud/water splash | Fender improperly installed or damaged. | Ensure the fender is securely and correctly aligned. Inspect for damage and replace if necessary. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Compatibility | Xiaomi 5 Plus Electric Scooter |
| Type | Rear Fender with Integrated Taillight |
| Material | High-quality ABS Plastic (Flexible, Sun Resistant, Durable) |
| Fender Dimensions (Approx.) | Length: 37.1 cm (14.6 in) Width: 9 cm (3.54 in) Height: 15 cm (5.90 in) |
| Taillight Wire Length (Approx.) | 79.4 cm (31.2 in) |
| Origin | Mainland China |

Figure 4: Product Dimensions. This diagram shows the length, width, and height of the fender, along with the taillight wire length. Note: Pure manual measurement may have 1-2mm error.

Figure 5: Excellent Material. The image indicates the fender is made of high-density plastic material.
8. User Tips
- Before purchasing, double-check your scooter model to ensure full compatibility with this fender.
- When installing, ensure all screws are tightened securely but avoid over-tightening to prevent damage to the plastic or screw threads.
- Periodically check the taillight's functionality, especially before night rides, to ensure maximum visibility and safety.
9. Warranty and Support
For warranty information, please refer to the terms provided by your retailer or seller at the time of purchase. For further support or detailed diagrams, you may consult the official user manual PDF available at: Product User Manual (PDF).