Introduction
Thank you for choosing the IRALAN Ceiling Fan. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new ceiling fan. Please read this manual thoroughly before installation and keep it for future reference.
Safety Rules
WARNING: To reduce the risk of fire, electric shock, or personal injury, always follow these instructions.
- To reduce the risk of electric shock, ensure electricity has been turned off at the circuit breaker or fuse box before beginning.
- All wiring must be in accordance with the National Electrical Code and local electrical codes. Electrical installation should be performed by a qualified licensed electrician.
- Do not use this fan with any solid-state fan speed control device.
- Mount to an outlet box marked "Acceptable for Fan Support of 45kg (99.12 lbs.) Or Less" and use mounting screws provided with the outlet box. Due to the complexity of the installation, a qualified licensed electrician is strongly recommended.
- The outlet box and support structure must be securely mounted and capable of reliably supporting a minimum of 45KGS. Use only UL Listed outlet boxes marked FOR FAN SUPPORT.
- The fan must be mounted with a minimum of 7 feet clearance from the trailing edge of the blades to the floor.
- Avoid placing objects in the path of the blades.
- To avoid personal injury or damage to the fan and other items, be cautious when working around or cleaning the fan.
- Do not use water or detergents when cleaning the fan or fan blades. A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
- After making electrical connections, spliced conductors should be turned upward and pushed carefully up into the outlet box. The wires should be spread apart with the grounded conductor and the equipment-grounding conductor on one side of the outlet box.
- Electrical diagrams are for reference only.
- The fan is suitable for indoor use only.
Setup and Installation
Tools Required
- Phillips screwdriver
- Flat blade screwdriver
- Step ladder
- Wire stripper
- Electrical tape
Unpacking and Parts List
Unpack your fan and check the contents against the following list. If any parts are missing or damaged, contact customer service.

| Item | Description | Quantity |
|---|---|---|
| 1 | Hanger | 1 |
| 2 | Motor | 1 |
| 3 | Motor shell | 1 |
| 4 | Blade | 3 |
| 5 | Blade screw | 6 |
| 6 | Decorative cover | 1 |
| 7 | Receiver | 1 |
| 8 | Remote control | 1 |
| 1/4*15 screw | 6 | |
| Explosion screw | 4 | |
| Gasket | 6 | |
| Self-tapping screws | 4 |
Installation Video Guide
Mounting Bracket Installation
To prevent personal injury and damage, ensure the hanging location allows the blade a clearance of 7.5 feet (2.3 meters) from the floor and 18 inches (45.72 centimeters) from any wall or obstruction.
- For Concrete Ceiling: Mark the location for the ceiling fan first, then drill two holes in the ceiling to aid in securing the ceiling bracket with two expansion screws provided. Secure the mounting bracket to the building structure with two expansion screws provided, then tighten the screws.
- For Wood Ceiling: Mark the location for the ceiling fan first, then secure the mounting bracket to the building structure with four wood screws provided.
NOTE: The hanger after installation must be able to withstand a weight of 45 kgs or more.
Installing Receiver and Making Electrical Connections
Follow these steps to install the receiver and connect the electrical wiring:
- Connect the wires from the house to the remote receiver as shown in the wiring diagram below.
- Connect the wires on the motor and the wires on the receiver to the corresponding colors. (Refer to the remote control manual for specific color coding).
- Install the motor shell: put the shell on the motor, rotate it to the right, and clamp it on the mounting bracket.

Blade and Lamp Installation
- Lock the fan blade onto the motor with the provided screws. Ensure all three blades are securely fastened.
- If your model includes a lamp kit: After locking the blade, install the lamp kit. Do not install the blade in the opposite direction. Insert the LED wire ends into the designated connectors.
- Tighten the decorative cover onto the motor.
- For models with a lamp, rotate the glass cover to the right to tighten it and check whether it is loose.
- Complete the installation.
Operating Instructions
Remote Control Functions
Your IRALAN Ceiling Fan comes with a remote control for convenient operation. The remote allows you to control various functions of the fan and light.

- Turn off all loads
- Fan speed control (6 levels)
- LED indicator light
- Turn on the light
- Fan off
- Fan positive and negative rotation control (Reversible motor for Summer/Winter mode)
- Fan timing control (1H, 2H, 4H options)
- The remote control uses a pair of 1.5V batteries.
- Test the battery; if the lamp does not respond, please replace the battery.
Remote Control Tips:
- Pairing: The remote control and receiver are paired using a learning code. Within 5 seconds of the controller being powered on, direct the remote towards the controller. Press and hold the 'total' key for about 5 seconds. A beep indicates successful learning. After successful learning, press the gear to use it normally. (Note: If powered on for more than one minute, learning will not be accepted).
- Troubleshooting: If the remote control cannot control the controller, check if the battery is loaded correctly.
- Battery Life: Low battery voltage will affect the remote control distance and may cause remote control failure. Replace the battery in time.
- Storage: When not in use for a long time, remove the battery from the remote control.
- Installation Note: During installation, ensure the ceiling cover of the fan does not compress any wires, which could cause wires to break or short circuit.
App Control
Your fan may also support app control for enhanced convenience. Follow these steps to set up app control:

- Turn off the lights first.
- Scan the QR code and download the app (works with iOS/Android system).
- Click "+" to add a new device.
- Control the device classification and set the name of the lamp, for example, "Fan Light". Control the device through the app later.
- Turn on the light.
- On the matching button, within 5 seconds of the device being powered on, click the "
" button. If the device flashes or beeps, it means the phone and the device are successfully matched and the lamp can be controlled through the application.
Maintenance
Regular cleaning will help maintain the appearance and performance of your ceiling fan.
- Do not use water or detergents when cleaning the fan or fan blades.
- A dry dust cloth or lightly dampened cloth will be suitable for most cleaning.
Troubleshooting
Fan Will Not Start
- Check circuit fuses or breakers.
- Check line wire connections to the fan and switch wire connections in the switch housing. CAUTION: Make sure main power is off.
- If the fan does not respond after being powered on and pressing the remote control, and the fan beeps, do not press the remote control multiple times. Turn off the power immediately, and check whether the wire between the motor and the receiver is loose. Alternatively, remove and reinstall the wire.
Fan Sounds Noisy
- Make sure all motor housing screws are snug.
- Make sure the screws that attach the fan blade bracket to the motor hub are tight.
- Make sure wire nut connections are not rubbing against each other or the interior wall of the switch housing. CAUTION: Make sure main power is off.
- Allow a 24-hour "breaking-in" period. Most noises associated with a new fan disappear during this time.
- If using an optional light kit, make sure the screws securing the glassware are tight. Check that the light bulb is also secure.
- Some fan motors are sensitive to signals from solid-state variable speed controls. If you have installed this type of control, choose and install another type of control.
- Make sure the upper canopy is a short distance from the ceiling. It should not touch the ceiling.
- If the above methods still do not solve the problem, please contact the manufacturer.
Specifications
| Attribute | Value |
|---|---|
| Brand Name | IRALAN |
| Model Number | SM-FAN |
| Item Type | Ceiling Fans |
| Style | Modern Style |
| Installation Method | Assembly |
| Control Method | Remote Control |
| Switch Type | Remote Control |
| Features | Infinitely Dimmable, Reversible Motor, 6 Wind Speeds, Timing Function, Low-noise Engine |
| Light Source | LED bulbs (3 colors light: warm, natural, white) |
| Luminous Flux | 249-2000 Lumens (up to 2400 Lumens, bright as a 18W light bulb) |
| Nominal Voltage | 120V-240V |
| Power Source | AC |
| Body Material | ABS, iron |
| Number of Lights | 1 pcs |
| Is Dimmable | No (Infinitely Dimmable refers to light temperature and brightness) |
| Is Bulbs Included | No (Integrated LED) |
| Is Batteries Included | No |
| Base Type | Wedge |
| Weight | 4.107/4.69kg (Product package weight: 4.79kg) |
| Certification | CCC, CE |
| Origin | Mainland China |
Dimensions and Room Suitability

- Sizes: Available in 42-inch (105cm) and 52-inch (132cm) diameters.
- Height: H 42cm/32cm (two downrods are available).
- Recommended Room Size: 12ft x 12ft to 18ft x 18ft (approximately 10-20㎡).
- Ceiling Height: Suitable for rooms with 8-10 ft ceiling height.

User Tips
- Seasonal Use: Utilize the reversible motor function to optimize air circulation. In summer, run the fan counter-clockwise for a cooling downdraft. In winter, run it clockwise at a low speed to circulate warm air upwards.
- Quiet Operation: The fan features a low-noise DC motor, ensuring quiet operation suitable for bedrooms and living areas.
- Energy Efficiency: The high-power DC motor offers up to 55% higher energy efficiency compared to AC motor ceiling fans.
- Lighting Customization: Take advantage of the infinitely dimmable LED light with 3 color temperatures (warm, natural, white) to create the perfect ambiance for any occasion.
Warranty and Support
Your IRALAN Ceiling Fan comes with a 2-year warranty.
For any questions, technical support, or warranty claims, please contact our customer service team:
Email Address: sxdsltd@163.com