1. Introduction
The Carlinkit Mini Ultra is a compact 2-in-1 wireless adapter designed to convert your car's factory-wired CarPlay or Android Auto system into a wireless experience. By simply plugging the device into your car's USB-A or USB-C port, you can enjoy seamless, automatic wireless connectivity to your smartphone, eliminating the need for cables.
Key Features:
- Plug and Play, non-inductive connection
- Supports wired to wireless CarPlay and wireless Android Auto
- Automatic connection upon entering the vehicle
- Retains original car controls (buttons, knobs, touch screen, steering wheel)
- Compatible with original car microphone for clear audio quality
- Supports Over-The-Air (OTA) upgrades and online feedback
- Compact and portable design
2. Package Contents
- Carlinkit Mini Ultra Wireless Adapter
- USB-C Adapter
- Instruction Manual (this document)
3. Setup Guide
3.1. Connection Diagram
The diagram below illustrates how the Mini Ultra adapter connects to your vehicle and smartphone.

Image: Carlinkit Mini Ultra connecting a smartphone to a car's infotainment system wirelessly.
3.2. LED Indicator Status
- Light Blue: Power indicator (device is powered on)
- Dark Green: CarPlay connected
- Dark Blue: Android Auto connected
3.3. Initial Setup Steps (Plug and Play)
Follow these steps for both Wireless CarPlay and Wireless Android Auto setup:
- Plug In: Insert the Carlinkit Mini Ultra adapter into your car's USB-A or USB-C port (use the provided USB-C adapter if necessary).
- Activate Phone Features: On your smartphone, turn on both Wi-Fi and Bluetooth.
- Pair via Bluetooth: Access your phone's Bluetooth settings. Search for the Bluetooth device name displayed on your car's infotainment screen (e.g., "VehiConn_xxxx").
- Connect: Tap on the device name to pair. Confirm any pairing requests on both your phone and the car screen. Agree to use CarPlay or Android Auto when prompted.
Once successfully paired, your car's screen will display the Wireless CarPlay or Android Auto interface. The adapter will automatically connect to your phone on subsequent uses.

Image: Visual guide for the 3-step connection process.
4. Operating Instructions
4.1. Automatic Connection
After the initial successful pairing, the Carlinkit Mini Ultra will automatically connect to your smartphone whenever you start your car and your phone is within range with Bluetooth and Wi-Fi enabled.
4.2. Using CarPlay/Android Auto Features
Once connected, you can use all the features of CarPlay or Android Auto directly on your car's infotainment screen. This includes:
- Navigation: Use your preferred map applications (e.g., Google Maps, Apple Maps, Waze).
- Music & Audio: Stream music, podcasts, and audiobooks from your favorite apps (e.g., Spotify, Apple Music, YouTube Music).
- Communication: Make and receive calls, send and receive messages using voice commands or the car's interface.
- Voice Assistants: Activate Siri (for CarPlay) or Google Assistant (for Android Auto) for hands-free control of various functions.
- Split Screen: Many vehicles support split-screen functionality, allowing you to view navigation and media simultaneously.

Image: Demonstrates integration with original car controls and voice assistants.
4.3. Accessing the Product Backend Control Page
The backend control page allows for device settings modification, feedback submission, and firmware updates.
For iPhone Users:
- Method 1 (CarPlay Connected): Open Safari or Chrome on your iPhone and navigate to the URL:
192.168.50.100. - Method 2 (CarPlay Not Connected): If the product is powered on (light blue LED), connect your iPhone to the product's Wi-Fi network. The Wi-Fi name will be "VehiConn_xxxx" (matching the Bluetooth name), and the password is
88888888or12345678. Once connected to the Wi-Fi, open Safari or Chrome and go to192.168.50.100.
For Android Phone Users:
- Temporarily turn off Bluetooth and Wi-Fi in your phone's settings, then turn Wi-Fi back on.
- Connect your Android phone to the product's Wi-Fi network. The Wi-Fi name will be "VehiConn_xxxx" (matching the Bluetooth name), and the password is
88888888or12345678. - Once connected to the Wi-Fi, open your browser and navigate to the URL:
192.168.50.100.
5. Maintenance
5.1. Firmware Updates (OTA)
The Carlinkit Mini Ultra supports Over-The-Air (OTA) firmware updates to improve performance, add features, and resolve issues. To update:
- Access the product backend control page as described in Section 4.3.
- Look for an "Online Upgrade" or "Update" option on the webpage.
- Follow the on-screen instructions to initiate the update.

Image: Online Upgrade interface.
Important: During a firmware update, ensure the product's power supply is stable and do not disconnect the device or turn off your car. The product will restart automatically after the upgrade is complete.
5.2. General Care
- Keep the device dry and away from extreme temperatures.
- Clean the device with a soft, dry cloth if necessary.
- Avoid dropping or subjecting the device to strong impacts.
6. Troubleshooting
6.1. Connection Issues
- Device not connecting: Ensure your phone's Wi-Fi and Bluetooth are on. Verify that you have correctly followed the pairing steps in Section 3.3.
- Intermittent connection: Check for any potential interference from other wireless devices. Ensure the adapter is firmly seated in the USB port.
- Car screen not recognizing adapter: Try plugging the adapter into a different USB port in your car, if available. Restart your car's infotainment system.
6.2. Audio or Display Issues
- No audio or distorted audio: Check your car's audio source settings. Ensure your phone's volume is up.
- Display flickering or freezing: Restart the adapter by unplugging and re-plugging it. Check for available firmware updates.
6.3. Feedback and Support
If you encounter persistent issues, you can submit feedback through the product backend control page (Section 4.3). When submitting feedback, provide a detailed description of the problem and your contact email. For Android users, you may need to turn off your phone's Wi-Fi and use mobile data to submit feedback. Please note any Case ID provided after submission for reference.
7. Specifications
| Model | Mini Ultra |
| CPU | Dual core 1.0GHz MIPS |
| Power Input | 5V (5V±0.2V===1.0A) |
| Power Consumption | 0.75W |
| Wi-Fi Frequency | 5.8GHz |
| Material | PC+ABS |
| Product Size | 32.85 x 20 x 6.55 mm |
| Compatible Mobile Phone | iPhone 6 and above (iOS 10+), Android phones (Android 11.0+) |
| Compatible Car | Vehicles with factory-wired CarPlay / wired Android Auto |
| Language | Automatically switches based on vehicle language environment |
| Compatible Resolution | Adaptive |
8. User Tips
No specific user tips were available from provided reviews or Q&A content.
9. Warranty and Support
9.1. Warranty Information
The Carlinkit Mini Ultra comes with a one-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase and the warranty card (if provided) as they are required for warranty service.
9.2. FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
9.3. Support
For technical support or warranty claims, please refer to the contact information provided with your purchase or on the official Carlinkit website. When contacting support, please have your product model and any relevant error messages or Case IDs ready.