3D Angel Wing Earphone Accessories 3D Angel Wing Earphone Accessories

Contents

3D Angel Wing Earphone Accessories Instruction Manual

Introduction

Thank you for choosing the 3D Angel Wing Earphone Accessories. These charming decorative wings are designed to personalize your wired earphones, adding a unique and whimsical touch to your listening experience. Crafted from durable plastic, they are lightweight and easy to attach.

Package Contents

  • 2 x 3D Angel Wing Earphone Decorations (1 pair)

Setup and Installation

These earphone accessories feature a simple clip-on design for easy attachment.

  1. Identify the desired position on your earphone cable, typically near the earbud housing.
  2. Gently open the clip mechanism on the back of each wing.
  3. Carefully position the wing over the earphone cable and press the clip closed until it securely holds the cable.
  4. Repeat for the second wing on the other earphone.
  5. Ensure the wings are securely attached and do not interfere with earphone comfort or function.
Pink 3D Angel Wings attached to white wired earphones, held by a hand.
Figure 1: Example of 3D Angel Wings attached to wired earphones.

Operating Instructions

The 3D Angel Wing Earphone Accessories are purely decorative. Once installed, they require no further operation. Enjoy the enhanced aesthetic of your earphones while listening to music or making calls.

Maintenance and Care

  • Cleaning: To clean the wings, gently wipe them with a soft, dry, or slightly damp cloth. Avoid using harsh chemicals or abrasive materials, as these may damage the plastic or the inlaid star gems.
  • Storage: When not in use, store the wings in a clean, dry place away from direct sunlight and extreme temperatures to prevent discoloration or damage.
  • Handling: Handle the wings gently to avoid bending or breaking the plastic clips.

Troubleshooting

Wings do not stay attached:

  • Ensure the earphone cable is properly seated within the clip mechanism.
  • Verify that the clip is fully closed and secure.
  • Check if the earphone cable diameter is compatible with the clip size. These wings are designed for standard wired earphone cables.

Wings appear damaged:

  • Inspect for any cracks or breaks in the plastic. If significantly damaged, replacement may be necessary.

Specifications

FeatureDetail
MaterialStable Plastic
Dimensions (approx. per wing)2 cm (0.79 inches) width x 1 cm (0.39 inches) height x 1 cm (0.39 inches) depth
CompatibilitySuitable for 6cm earphones, AirPods 1/2
Available ColorsPink, White, Blue
Package Contents2 pieces (1 pair)
OriginMainland China
Pink 3D Angel Wings attached to white wired earphones, held by a hand, with dimension labels: 2cm / 0.79in width and 1cm / 0.39in height.
Figure 2: Approximate dimensions of the 3D Angel Wing Earphone Accessories.

User Tips

  • Aesthetic Expectation: Please note that the wings have a relatively flat profile, which contributes to their lightweight design and comfortable wear.
  • Secure Attachment: For best results, ensure the clip is firmly closed around the earphone cable to prevent accidental detachment during use.

Warranty and Support

No specific warranty information is provided for this product. For any issues or inquiries, please contact your point of purchase or the seller directly.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.