1. Product Overview
The JONSBO NV10 is a desktop MINI-ITX small chassis featuring an aluminum alloy sandblasting process for a delicate metallic texture, complemented by North American walnut trim. Its design is simple yet atmospheric, compatible with 1U Flex power supplies, and offers a compact and portable capacity of approximately 4.5 liters. The chassis can be placed in two flexible ways: vertically or horizontally. It comes equipped with a PCI-E 4.0 extension cable, supporting low-profile graphics cards up to 190mm in length.

Figure 1: JONSBO NV10 Mini Computer Case - Overview
Video 1: JONSBO NV10 Product Showcase
2. Setup Guide
2.1 Package Contents
Please verify that all components are present in the package:
| Item | Quantity | Description |
|---|---|---|
| A | 6 | Screws for Motherboard/Graphics card extension cable |
| B | 8 | Washers / Screw washers |
| C | 4 | PSU Screws / Power Supply Screws |
| D | 1 | Graphics card extension cable |
| E | 1 | Screw wrench |
| F | 8 | Foot / Footbase |
2.2 Chassis Disassembly
Before installing any hardware, you need to open the chassis:
- Remove Top Cover: Pinch the pull strap on the top cover and pull it upward to open the aluminum top cover.
- Remove Bottom Cover: Use a screwdriver to remove the 4 screws on the bottom plate, then remove the aluminum bottom cover.

Figure 2: Tool-Free Opening of the Chassis
2.3 Motherboard Installation
- Place your Mini-ITX motherboard into the designated area within the chassis.
- Align the motherboard with the standoffs and secure it with screws.

Figure 3: Motherboard Installation
2.4 Power Supply Unit (PSU) Installation
The JONSBO NV10 supports 1U FLEX power supplies with a maximum length of 150mm.
- Insert the 1U FLEX power supply into its designated bay at the rear of the chassis.
- Secure the power supply to the chassis using the provided PSU screws.

Figure 4: PSU Support and Installation
2.5 Graphics Card Installation
The chassis supports low-profile graphics cards up to 190mm in length and includes a PCI-E 4.0 extension cable.
- Remove the PCIE aluminum cover and any relevant PCIE card strips from the chassis.
- Connect your low-profile graphics card to the provided PCI-E 4.0 extension cable.
- Insert the graphics card (with the extension cable) into the appropriate slot on your motherboard.
- Once the graphics card is installed, secure it by locking the PCIE aluminum cover and screwing in the graphics card.

Figure 5: Graphics Card Support and Installation
2.6 Foot Installation
The chassis can be used with or without the included feet, depending on your preference for vertical or horizontal orientation.
- Peel off the protective film from the adhesive side of each foot.
- Attach the feet to the bottom or side of the chassis as desired for stability and airflow.

Figure 6: Foot Installation
2.7 Cable Management
Before securing the motherboard and other components, it is recommended to arrange and route power cables and data cables neatly to ensure optimal airflow and a clean build.
3. Operating Instructions
3.1 Placement
The JONSBO NV10 chassis is designed for flexible placement. It can be positioned either vertically or horizontally to suit your desk setup and aesthetic preferences.
3.2 Front I/O Ports
The front panel of the chassis features one Type-C port (USB 3.2 Gen 2) for convenient connectivity of peripherals and storage devices.
4. Maintenance
4.1 Cleaning
To maintain the appearance of your JONSBO NV10 chassis, use a soft, dry cloth to wipe down the aluminum surfaces. Avoid using abrasive cleaners or solvents that could damage the finish.
4.2 Disassembly for Maintenance
The chassis features a tool-free opening mechanism for the top lid, allowing for easy access for cleaning internal components or performing upgrades. Simply pinch the pull strap and lift the top cover.
5. Troubleshooting
If you encounter issues during assembly or operation, consider the following:
- Component Fit: If a component does not fit, double-check its dimensions against the chassis specifications (e.g., GPU length, CPU cooler height, PSU length).
- Airflow: Ensure all cables are routed neatly to prevent obstruction of airflow, especially around perforated ventilation areas.
- Power: Verify all power connections (motherboard, CPU, GPU, storage) are securely seated.
- Front I/O: Check that the front panel connectors (USB Type-C) are correctly plugged into the motherboard headers.
6. Specifications
| Feature | Specification |
|---|---|
| Model Number | NV10 |
| Brand Name | Jonsbo |
| Type | Vertical (supports vertical and horizontal placement) |
| Material | Aluminum alloy (3.3mm Aluminum Alloy + 1.0mm Steel) |
| Form Factor | ITX |
| Application | Desktop |
| Front Ports | Type-C*1 (USB 3.2 Gen 2) |
| Chassis Type | Desktops |
| Power Model | SFX (1U FLEX power supply) |
| Case Size (W*D*H) | 205mm * 205mm * 108mm |
| Case Net Weight | 1.5KG |
| Max PSU Length | 150mm |
| Max CPU Cooler Height | 38mm |
| Max GPU Length | 190mm (Low-Profile) |
| Internal 3.5" Drive Bays | 0 |
| RGB Support | NO RGB |
| Power Supply Mounted | Bottom |
| With Side Panel Window | No |
| With Fan | No |
| With Power Supply | No |
| High-concerned chemical | None |
| PCI Expansion Slot | 2 |

Figure 7: Detailed Product Specifications
7. User Tips
- Component Selection: Due to the compact ITX form factor, carefully verify the dimensions of all your components (CPU cooler, GPU, PSU) against the chassis specifications before purchasing to ensure compatibility.
- Cable Management: Take extra time to manage cables neatly. This not only improves aesthetics but also significantly enhances airflow within the small chassis, contributing to better thermal performance.
- Orientation: Experiment with both vertical and horizontal orientations to find what best fits your workspace and cooling needs.
8. Warranty and Support
For warranty claims, technical support, or further inquiries, please contact the manufacturer or your point of purchase. Specifications are subject to change without prior notice.
Manufacturer: Dongguan Sibositong Industrial Co., Ltd.
Address: No.5, Xinglong Lu, Sanzhong Village, Qingxi Town, Dongguan City, Guangdong Province, 52351, China
© 2023 Dongguan Sibositong Industrial Co., Ltd. All rights reserved.