1. Introduction
The Trimui Smart Pro is a portable retro gaming handheld designed for an immersive gaming experience. It features a 4.96-inch IPS screen with a 1280x720 resolution, powered by an Allwinner A133plus quad-core processor and PowerVR GE8300 GPU. This device runs on an optimized open-source Linux system and supports a wide range of emulators.
Video: Trimui Smart Pro product overview, showcasing the device's interface and physical features.
2. Setup
2.1 Unboxing
Your Trimui Smart Pro package includes the following items:
- Trimui Smart Pro Console x1
- USB Charging Cable x1
- User Manual x1
- Giftbox x1

Image: Contents of the Trimui Smart Pro package, including the console, user manual, charging cable, and giftbox.
2.2 Charging the Device
Before first use, fully charge your Trimui Smart Pro. The device is equipped with a 5000mAh Li-polymer battery, providing over 5 hours of gameplay.
- Connect the provided USB Type-C charging cable to the device's charging port (bottom Type-C port).
- Connect the other end of the cable to a 5V/1.5A power adapter (not included).
- The middle logo indicator light will show the charging status:
- Red light: Low power
- Yellow light: Charging
- Green light: Working (fully charged or in use)
- The device supports charging while turned off. USB data transfer is limited to 500mA.

Image: Illustrates the 5000mAh Li-polymer battery, providing 5+ hours of battery life with 5V/1.5A Type-C charging.
2.3 Inserting a Memory Card (TF Card)
The Trimui Smart Pro supports external storage via a TF card, expandable up to 1TB. The USB port also supports FAT32 format for USB flash drives.
- Locate the TF card slot on the device.
- Gently insert a FAT32 formatted memory card into the slot until it clicks into place.
- To remove, push the card in slightly until it springs out.
2.4 Powering On/Off
- To Power On: Press and hold the Power button (located on the top edge) until the screen lights up.
- To Power Off: Press and hold the Power button until a power-off menu appears, then select 'Power Off'. A short press will put the device into sleep mode.
3. Operating Instructions
3.1 Main Interface Operation
The main interface provides access to various functions:
- Game Categories: Browse games by platform (e.g., GBA, GBC, PS).
- History: Recently played games appear in this section. History can be cleared in settings.
- Search: Use the search function to find games by keyword.
- Center App: Expert mode including video player, music player, e-book, file manager.
3.2 Game Buttons and Ports
Familiarize yourself with the controls:
- D-Pad: Directional Pad for movement and menu navigation.
- Left/Right Joysticks: Analog input for games.
- A/B/X/Y Game Keys: Action buttons.
- L1/L2/R1/R2: Shoulder buttons.
- SELECT/START: Game control buttons.
- MENU: Access system menu.
- VOL +/-: Volume control.
- Power Key: Power on/off, sleep mode.
- RESET: System reset button.
- TF Card Slot: For external memory.
- Type-C Ports: Top for USB host (connect USB handle), bottom for charging and OTG function.
- 3.5mm Headphone Jack: For audio output.

Image: Highlights outstanding details including A/B/X/Y keys, Mood LED, L/R keys, custom FN switch, and built-in stereo speakers.
3.3 Game Import
To play games from your TF card:
- Insert a FAT32 formatted memory card into the external card slot.
- New folders for each supported platform will be created automatically.
- Place your game ROMs into the corresponding platform folders.
- Select the game from the game rooms in the main interface.
Supported Platforms: PSP, PS1, DC, NDS, ARCADE, GBA, GBC, GB, SFC, FC, MAME, MD, GG, PCE, NGPC, SMS, WSC.

Image: Displays 26+ built-in emulators including FC, GB, GBC, PS, SFC, GBA, MD, NGP, MS, PCE, NDS, WSC, MAME2003PLUS, MAME2010, PGM, CPS-1, CPS-2, CPS-3, NEO-GEO, PPSSPP, N64, ATARI2600, ATARI7800, NGPC, DC, WONDERSWAN, GG, FBNEO. Supports open source RetroArch.
3.4 Common Settings
Access these settings from the main interface:
- Language Settings: Select Settings -> Language Settings. Available languages include Chinese, English, Japanese, Korean, Russian, French, German, Spanish, Portuguese.
- Backlight Brightness: Select Settings -> Backlight Brightness. There are 5 levels of backlight brightness.
- Backlight Time: Select Settings -> Backlight Time. Options include 1, 2, 5, 10 minutes, and 'always on'. The screen backlight will turn off after the set time.
3.5 Game Settings
- Game Quality: Options include high-definition, scan line, fast, dot matrix. Different options present different screen filter display effects.
- Gamestreaming (Moonlight):
- Ensure the game console and computer are on the same Wi-Fi network.
- Select Settings -> Moonlight in the main interface.
- Enter the IP address of the computer to start pairing.
- Enter the PIN code to pair successfully and select Connect.
- During streaming, press F+START to exit streaming.
- Bluetooth Settings:
- Select Settings -> Bluetooth Settings in the main interface.
- Select Enable Bluetooth, and press the X key to scan for devices.
- Select the controller you want to connect from the 'Search device' list.
3.6 RA Emulator Shortcuts
When in a game using the RetroArch emulator, use these shortcuts:
- F+Menu: Access the RetroArch menu.
- F+R2: Fast Forward
- F+L2: Slow Motion
- F+R1: Save State
- F+L1: Load State
- F+Y: Display Frame Rate
- F+B: Screenshot
- F+X: Pause
- F+START: Quit game
- F+VOL+: Adjust Brightness
- F+Left/Right Direction: Select Save State Slot
3.7 Online Play
To play online with another console:
- Ensure both consoles are on the same Wi-Fi network.
- Note down the IP addresses of both consoles (NETWORK SETTINGS -> IP ADDRESS).
- In RetroArch, enter the same game and call out the menu.
- Game Console A (Host): Select Netplay -> Host -> Start Netplay Host.
- Game Console B (Slave): Select Netplay -> Connect to Netplay Host, enter the IP address of Console A, and press START to connect.
4. Maintenance
4.1 General Care
- Keep the device clean by wiping it with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials.
- Protect the screen from scratches.
- Avoid exposing the device to extreme temperatures, direct sunlight, or high humidity.
- Store the device in a cool, dry place when not in use.
4.2 Battery Care
- Do not fully discharge the battery regularly; recharge it before it runs completely empty.
- If storing the device for an extended period, charge the battery to about 50% to prolong its lifespan.
- Avoid leaving the device plugged in for prolonged periods after it's fully charged.
5. Troubleshooting
- Device not turning on: Ensure the device is charged. Connect it to the charger for at least 30 minutes before attempting to power it on again. If unresponsive, try pressing the RESET button with a thin pin.
- Games not loading: Check if the TF card is properly inserted. Ensure game ROMs are in the correct format and placed in the appropriate emulator folders. Verify the TF card is formatted to FAT32.
- Screen issues (flickering, no display): Try restarting the device. If the issue persists, ensure the device has sufficient charge.
- Controls unresponsive: Restart the device. If specific buttons are not working, check for any physical obstructions.
- Wi-Fi/Bluetooth connection issues: Ensure you are within range of the network/device. Restart the device and try reconnecting. For Bluetooth, ensure the device is in pairing mode.
6. Specifications

Image: Detailed product parameter table for the Trimui Smart Pro.
| Feature | Description |
|---|---|
| Color | Black / White / Gray |
| CPU | Allwinner A133P 1.8GHz (Cortex-A53 quad-core) |
| GPU | Imagination PowerVR GE8300 660MHz |
| DRAM | 1GB LPDDR4X |
| Built-in Storage | 8GB eMMC |
| External Storage | TF card expandable up to 1TB. USB port supports FAT32 for flash drives. |
| Display | 4.96 inch, 1280x720 pixel, IPS, fully laminated |
| Wireless | WLAN 802.11 b/g/n |
| Bluetooth | BT2.1 + EDR/4.2 |
| Speaker | Built-in stereo speakers (1W) x 2 |
| Earphone | 3.5mm headphone jack |
| Microphone | Built-in mono microphone |
| Battery | 5000 mAh Li-polymer battery, 3.7V, with 6 hours battery life |
| Charging | USB Type-C interface with 5V/1.5A charging. Data transfer limited to 500mA. |
| LED | Middle LOGO charging indicator light |
| Mood LED | RGB double Joystick mood light |
| Function Key | Custom FN switch |
| Sockets | Top Type-C: USB Host. Bottom Type-C: Charging/OTG. TF card slot. |
| Vibration Motor | Single-channel vibration motor |
| Network Battle | Support |
| Joystick | Dual joystick |
| System OS | Linux |
| System UI | Trimui UI |
| Language | Simplified Chinese / Traditional Chinese / English / German / Spanish / French / Italian / Japanese / Korean / Portuguese / Russian |
| Material | ABS Plastic + Glass + Electronic Components |
| Product Dimensions | Width: 187.4mm (7.38in), Height: 79.8mm (3.14in), Depth: 17.2mm (0.68in) |
| Net Weight | 229 grams (8.1 oz) |
| Emulators | ARCADE, CPS1, CPS2, CPS3, DC, FBNEO, FC, GB, GBA, GBC, GG, MAME, MAME2003PLUS, MD, MS, N64, NDS, NEOGEO, NGP, OPEN, PCE, PGM, PS, PSP, SFC, SS, WS, DOS |
| Applications | Moonlight / Media Player / USB Card Reader & Writer / Game by Port |
7. User Tips
- Firmware Updates: Periodically check the official Trimui website or community forums for firmware updates to ensure optimal performance and compatibility.
- Quality TF Cards: Use high-quality, reputable brand TF cards for storing games to prevent data corruption and ensure smooth gameplay.
- Screen Protection: Consider applying a screen protector to prevent scratches on the IPS display.
- Customization: Explore the open-source Linux system for potential customization options and community-developed enhancements.
8. Warranty and Support
For detailed warranty information, technical support, and further assistance, please refer to the official user manual PDF or contact the manufacturer directly.
A comprehensive user manual in PDF format is available for download: View User Manual (PDF)