1. Introduction
This manual provides instructions for the G9N9N Smart TV Remote Control, a Bluetooth-compatible voice remote designed as a direct replacement for Google Chromecast 4K original Remote Control (Snow) and compatible with various Google TV Chromecast models. It features soft silicone buttons for comfortable use and supports effortless voice search and control for a seamless entertainment experience.
Video: A G9N9N remote control displayed on a rotating stand, showcasing its design and buttons.
2. Setup
2.1. Battery Installation
- Remove the battery cover from the back of the remote control.
- Insert two new AAA alkaline batteries, ensuring correct polarity (+/-).
- Replace the battery cover securely.

Image: The remote control with its battery compartment open, illustrating where to insert the two AAA batteries.
2.2. Initial Device Connection (Chromecast)
Before pairing the remote, ensure your Google Chromecast device is properly connected to your TV's HDMI port and powered on.

Image: Visual guide for initial setup, showing plugging the Chromecast into the TV, installing batteries in the remote, and starting to stream.
3. Pairing Instructions
To pair your G9N9N remote control with your Google Chromecast device, follow these steps:
- Activate Pairing Mode on Chromecast: Press the button on the back of your Chromecast device. The device will enter pairing mode and notify you on your TV screen.
- Initiate Pairing on Remote: On the G9N9N remote, simultaneously press and hold the Back (
) and Home (
) buttons for approximately 10 seconds until the LED indicator light at the bottom of the remote starts flashing. - Confirm Pairing: Once the LED indicator light appears and is flashing, release the buttons. Then, press the Home (
) button on the remote control. The remote should now be paired with your Chromecast device.

Image: Visual instructions for pairing the remote, highlighting the Back and Home buttons.
4. Operating Instructions
The G9N9N remote control offers intuitive navigation and voice control for your Google TV Chromecast device.
4.1. Button Functions

Image: Front view of the remote control, showing the layout of all buttons.
- Navigation Ring: Use the circular ring for directional navigation (Up, Down, Left, Right) and the center button to select items.
- Back (
): Returns to the previous screen or menu. - Home (
): Takes you to the main home screen of Google TV. - Voice Assistant (
): Press and hold to activate voice commands for searching, controlling playback, and asking questions. - Volume Up/Down (
): Adjusts the volume of your TV or connected audio device. - Mute (
): Mutes or unmutes the audio. - Power (
): Turns your TV or connected device on/off. - Input (
): Switches between different input sources on your TV.
4.2. Voice Control
To use voice commands, press and hold the Voice Assistant button (
) and speak clearly into the remote's microphone. You can search for content, control playback, adjust settings, and get information.
5. Maintenance
5.1. Battery Replacement
When the remote control's performance degrades or it stops responding, it's time to replace the batteries. Follow the steps in Section 2.1 to install two new AAA alkaline batteries.
5.2. Cleaning
To clean the remote control, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure no moisture enters the remote. Avoid using harsh chemicals or abrasive cleaners.
6. Troubleshooting
6.1. Remote Not Responding
- Check if the batteries are correctly inserted and have sufficient charge. Replace them if necessary.
- Ensure there are no obstructions between the remote and your Chromecast device.
- Re-pair the remote control by following the instructions in Section 3.
6.2. Voice Function Not Working
If the voice function does not work correctly after initial pairing, the remote may need to be re-paired specifically for voice commands through your TV's settings:
- Go to the Google TV homepage.
- Navigate to Settings.
- Select Remotes & Accessories.
- Choose to add a new remote or re-pair your existing remote.
- Follow the on-screen prompts to complete the process.
7. Specifications
| Feature | Detail |
|---|---|
| Certification | CE |
| Origin | Mainland China |
| Use | TV, Set-Top Box |
| Wireless Communication | Bluetooth-Compatible, IR |
| Type | Remote control |
| Shell Material | ABS |
| Key Material | Silicone |
| Color | White |
| Power Supply | 2 AAA batteries (not included) |
| Size | 122mm x 38mm x 16mm |
| Weight | 55 grams |
7.1. Compatibility
The G9N9N remote control is compatible with the following devices and models:
- Google Chromecast 4K TV Snow Streaming Player
- G9N9N, GA01920-US, GA01923-US, GA01919-US, GA02463-US, GA01409-US, GA02464-US
- Chromecast (Google TV)
- Chromecast with Google TV

Image: Text detailing the remote control's compatibility with specific Google Chromecast models.
8. User Tips
- Always ensure fresh batteries are used for optimal performance, especially for voice commands.
- If you experience any lag or unresponsiveness, try re-pairing the remote as described in the troubleshooting section.
- For the best voice command experience, speak clearly and directly into the remote's microphone.
9. Warranty and Support
For any issues not covered in this manual or for further assistance, please refer to the product's official support channels or contact the seller. Keep your purchase receipt for warranty claims, if applicable.
A PDF version of the user manual may be available for download from the product page or seller's website.