XTOOL D9S PRO

Contents

XTOOL D9SPRO ECU Programming Tools Car Diagnostic OBD2 Bidirectional Scanner

Model: D9S PRO

Professional Scan Tool

1. General Introduction

The XTOOL D9SPRO is a smart diagnostic system designed for comprehensive vehicle diagnostics and programming. It features a 9.7-inch touch screen, Android 10.0 OS, a Quad-Core 1.8GHz processor, 4G RAM, and 128G ROM. It supports wireless Wi-Fi connectivity for efficient and stable data transfer.

This device offers a wide range of functions including ECU programming and coding, guided functions for BMW and VAG, FCA AutoAuth protocol support, over 45 maintenance services, 4000+ active tests, topology mapping, full system diagnostics, pre-scan and post-scan reports, and coverage for over 150 brands and 23+ languages.

The KC501 Key & Chip Programmer is a multipurpose tool that supports the following functions:

  • Read & write car keys & key chip
  • Generate dealer keys
  • Write data to key emulators
  • Read remote frequency, chip type & chip ID
  • Read & write Mercedes-Benz infrared key
  • Read & write MCU/EEPROM chip

This programmer can be used with advanced Xtool diagnosis/key programming tablets or PC/laptops with KC501 Studio installed.

Note:

  • Some Xtool tablets (e.g., P700 series) do not have USB-C or USB-A ports, making them incompatible with KC501.
  • Key programming functions may not work on all cars; please check compatibility before purchase.
  • The default language is English. If you need other languages, please contact the seller and provide the S/N.

2. Setup

2.1. Exposed View of KC501

XTOOL D9S PRO device with VCI and key features highlighted

The KC501 Key & Chip Programmer features several ports and slots for various functions:

  1. DC Port: Provides 12V DC power supply. Connect 12V power supply when working on MCU/ECU reading & writing.
  2. USB-B Port: Provides data transmission between KC501 and Xtool devices or PC. Also provides 5V power supply when connected.
  3. DB 26-Pin Port: Can be connected with Mercedes-Benz infrared cable, ECU cable, MCU cable, and MC9S12 cable.
  4. Cross Signal Pins: Holds the MCU board, MCU spare cable, or DIY signal interface. Used to place MCU board, MCU spare cable, or DIY signal cable to read or write MCU and ECU chips.
  5. Locker: Locks the EEPROM component transponder slot.
  6. EEPROM Component Transponder Slot: Holds the EEPROM plug-in transponder or EEPROM socket, used to read & write EEPROM chip. The right-bottom corner of the slot is PIN 1. Check the DIP SOCKET diagram printed on the right of the slot.
  7. Status LED: Indicates current operating status.
  8. IC Card Induction Area: Used to read and write IC card data.
  9. Display Screen: Shows remote frequency or transponder ID.
  10. Remote Frequency Button: Press this button to show remote frequency on the display screen.
  11. Transponder ID Button: Press this button to show transponder type and ID on the display screen.
  12. Transponder Slot: Holds the transponder to read or write transponder data.
  13. Vehicle Key Slot: Used to hold the vehicle key to read or write vehicle key data.
  14. Remote Control Transponder Induction Area: Used to read and write remote control transponder data.
  15. Mercedes Infrared Key Slot: Used to read or write Mercedes vehicle key data.

2.2. Accessories

The KC501 comes with various accessories to facilitate different operations:

  • FQFP Boards: For welding microcontrollers to make jump wires easier. Includes 5 different boards for microcontrollers with different pins (64/80/112/144/176). When welding, ensure the white dot indicates pin 1 and do not weld the chip in the wrong direction.
  • EEPROM PCBA: Used for reading & writing EEPROM chips on a bench.
  • EEPROM Chip Test Stand: Holds EEPROM chips for reading & writing on a bench.
  • IC Clip Cable: A chip clip to read & write EEPROM chips without desoldering from the module.
  • Color Cable: Connects to the 26-pin connector for jumping wires to read & write data on modules.
  • DuPont Cable: Separated cables for multi-purposes like jumpers and reading data.
  • Mercedes IR Key Emulator: Used to read & collect EIS/EZS data during Mercedes-Benz key programming.
  • XTA Cables: Wiring harnesses for ECU reading & writing. Connect the DB26 socket to the KC501 and jump wires onto the modules.
  • USB3.0 to USB-B Cable: Connects KC501 with Xtool tablets or PC/laptop for data transfer and power supply.
  • USB3.0 to USB-C Adapter: Allows KC501 to be used with devices having USB-C ports.
  • Power Adapter: For operations requiring external power (e.g., module programming), connect KC501 with a 12V DC power input.
Image showing the XTOOL D9S PRO Global Version package contents, including the main unit, VCI, power adapters, various cables, and a tool case.

The image above illustrates the comprehensive set of accessories included with the D9S PRO Global Version, ensuring broad compatibility and functionality for various diagnostic and programming tasks.

3. Operating Instructions

3.1. General Operation

The XTOOL D9SPRO is designed for efficient and comprehensive vehicle diagnostics. It features a user-friendly interface with various functions accessible from the main screen.

This video demonstrates the basic navigation and functionality of the XTOOL D9S Pro Smart Diagnostic System, including accessing account information, workshop details, subscription status, vehicle diagnosis, reports, special functions, updates, and settings like language and unit preferences.

3.2. Program Keys & Emulators

The KC501 is required for certain key programming processes. When needed, the device will prompt you to connect the KC501. Use the USB3.0 to USB-B cable to connect it to your Xtool device. The key programming software will guide you through the process.

Note:

  • When using KC501 with your tablet for the first time, you will be prompted to bind the device to the tablet.
  • To use the device on another tablet, contact your dealer or Xtool aftersales services.
Diagram illustrating the IMMO & Key Programming functions of the XTOOL D9S PRO, showing steps like reading PIN code, checking number of keys, generating dealer keys, adding keys, and deleting lost keys.

The image above details the IMMO & Key Programming capabilities, including reading PIN codes, checking key counts, generating dealer keys, adding new keys, and deleting lost keys. This function is crucial for vehicle security and key management.

3.3. Read Remote Frequency

To recognize the frequency of remotes:

  1. Connect KC501 to a power supply.
  2. Insert the key into the slot with the remote signal-radiation side down.
  3. Press the "FR" button on the KC501.
  4. Press any button on the key.
  5. The frequency reading will be shown on the screen.

3.4. Read Transponder ID & Chip Type

To read the transponder ID and chip type of a key:

  1. Connect KC501 to a power supply.
  2. Insert the key into the slot.
  3. Press the "TR" button on the key.
  4. The readings will be shown on the screen.

3.5. EEPROM Reading & Writing

There are multiple ways to install an EEPROM chip for reading and writing:

3.5.1. Installing EEPROM Chip Directly

  1. Switch the locker up to unlock the slot.
  2. Put the EEPROM chip inside the slot, ensuring pin 1 (right-bottom corner) is correctly oriented.
  3. Switch the locker down to hold the chip in place.

Note:

  • This method is only supported for large-sized EEPROM chips.
  • Ensure the chip is held firmly in the slot.

3.5.2. Via EEPROM PCBA

  1. Take out the PCBA and weld (or install) the EEPROM chip onto it.
  2. Turn the side with characters to the front (characters will appear upside down).
  3. Install the entire PCBA onto KC501 and connect it to the cross-signal pins.

Note:

  • Before welding, ensure correct orientation; a groove or dot indicates pin 1.

3.5.3. Via IC Test Stand

  1. Turn the IC stand so pins are on the right side; the right-bottom corner indicates pin 1.
  2. Press the locker on the stand and insert the EEPROM chip, aligning pin 1.
  3. Switch the locker on the KC501 up to unlock the slot.
  4. Insert the stand into the slot, recognizing pin 1 of the stand and slot.
  5. Switch the locker down to hold the stand in place.

Note:

  • This method is only supported for small-sized EEPROM chips.
  • Ensure the chip and stand are held firmly.

3.5.4. Via IC Clip Cable (No Sealing-Off Required)

  1. Switch the locker on the KC501 up to unlock the slot.
  2. Insert the pin-side of the clip cable into the slot. Pin 1 is marked with a red wire, which should head towards the bottom of the KC501.
  3. Switch the locker down to hold the cable in place.
  4. Use the clip to firmly attach it to the corresponding EEPROM chip.

Note:

  • This method is only supported for small-sized EEPROM chips.

3.5.5. Read & Write EEPROM on Tablets

  1. After installing the EEPROM chip, connect KC501 to the tablet.
  2. Go to Special Function > EEPROM Adapter.
  3. Select Read/Write EEPROM, then choose "KC501", and find the EEPROM brand, model, and scale.
  4. From the menu, you can find the way to recognize pin 1 on the EEPROM chip. Click "Read data".
  5. After reading, you can edit the name of the EEPROM file and save it as a BIN file. The path will be shown on the screen.
  6. After saving, a notice will ask if you want to edit the data. Click "Yes" to edit or "No" to exit. You can also edit files from the File Browser menu.
  7. To write data, click "Write data", select the data, and click "Yes" to start writing.

3.6. Read & Write ECU/BCM Data

To use KC501 and Xtool tablets to read & write ECU/BCM data:

  1. Connect KC501 to the tablet.
  2. Go to EEPROM Adapter > Read/Write ECU data, and select the ECU/BCM you want to operate.
  3. Open "Operation document" to get wiring diagrams for the specific ECU/BCM.
  4. Use the XTA wiring harness or DuPont cable to connect the ECU and the KC501.
  5. Click "Read data" to read data from the ECU/BCM module.
  6. After reading, you can edit the name of the file and save it as a BIN file. The path will be shown on the screen.
  7. After saving, a notice will ask if you want to edit the data. Click "Yes" to edit or "No" to exit. You can also edit files from the File Browser menu.
  8. To write data, click "Write data", select the data, and click "Yes" to start writing.

Note:

  • Please check the Support list for all supported ECU/BCM.
  • For some operations, a 12V power supply is needed. Plug in the 12V DC power supply when operating such functions.
Diagram showing ECU Programming and ECU Coding capabilities for various car brands like BMW, Audi, Benz, VW, Ford, Lincoln, Mazda, and Skoda.

The image above illustrates the extensive ECU Programming and ECU Coding support for a wide range of vehicle brands, including both online and offline programming options.

3.7. Functions on PC/Laptop

Before programming on a PC or laptop, ensure "KC501 Studio" application is installed. Download it from the Xtool official website (Support > Download Center > Upgrade tool > KC501).

Note:

  • KC501 Studio is only supported on Windows 7 or later systems.
  • Shut down all anti-virus software during installation.

3.7.1. Read & Write EEPROM With PC/Laptop

  1. Select the correct EEPROM brand, model, and scale, or click "Open" to find an existing BIN file.
  2. Click "Read" and wait. The results will show on the interface. You can edit it directly or save it as a BIN file.

3.7.2. Read & Write Transponder Chip With PC/Laptop

This function works on ID46/48 keys.

  1. Insert the key (or transponder chip) into the KC501 slots.
  2. Connect KC501 to PC/laptop.
  3. Click the "Key" menu on the left.
  4. Select the key you are reading; the interface will change.
  5. Click "Read" for each column to show corresponding data. You can edit results and click "Write" to replace data.

3.8. Advanced Diagnostic Features

The D9SPRO offers several advanced diagnostic capabilities:

  • OE-Level Full System Diagnostic: Scans all vehicle systems (engine, transmission, SRS, ABS, TPMS, BCM, etc.) to read/clear codes, view live data, perform active tests, and retrieve ECU information.
  • Topology Module Mapping: Provides a color-coded topology display of communication structures between vehicle modules, allowing quick fault detection.
  • ECU Programming: Online ECU Programming for BMW, Mercedes-Benz, and Volkswagen; Offline ECU Programming for Ford, Lincoln, and Mazda. Updates ECU software, programs new ECUs, and fixes performance/emission issues.
  • ECU Coding: Personalizes vehicle settings, enables hidden features, disables annoying functions, and reprograms adaptive data after component replacements.
  • Bi-Directional Control (Active Test): Sends commands to vehicle ECUs to perform active tests (e.g., A/C Clutch on/off, Fuel Injectors, ABS Pump Motor cycling, window/door operation) to quickly identify faulty components.
  • FCA AutoAuth Access: Supports 2018+ FCA cars (Chrysler, Dodge, Jeep) for read/clear codes, bi-directional control, active tests, and key programming (PIN extraction and writing) via the Security Gateway Module.
  • Guided Functions: Provides step-by-step instructions for complex functions on VAG (VW, Audi, Skoda) and BMW E chassis vehicles.
  • Pre-Scan and Post-Scan: Creates pre-repair diagnostic reports and checks for new DTCs after repairs, ensuring quality.
  • Diagnostic Report 2.0: Generates comprehensive reports with customizable layouts and client information.
  • Auto Vin Auto Scan: Automatically identifies vehicle information (manufacturer, model, year) for simplified diagnostics.
  • 8-in-1 Live Data Stream: Merges up to 8 live data streams in one graph for easy comparison, analysis, and tracking of vehicle performance. Supports data record, playback, and export to CSV.
Diagram showing the OE-Level Full System Diagnostic capabilities of the XTOOL D9S PRO, including reading/erasing DTCs, live data, freeze frame, ECU info, and bidirectional control.

The image above illustrates the comprehensive OE-Level Full System Diagnostic features, including DTC management, live data monitoring, freeze frame analysis, ECU information retrieval, and bidirectional control for in-depth vehicle assessment.

Diagram explaining Topology Mapping on the XTOOL D9S PRO, showing an intuitive system view for quick fault detection and improved efficiency.

This image visually explains Topology Mapping, demonstrating how the D9S PRO provides an intuitive system view to quickly detect faults and improve diagnostic efficiency by showing the communication structure between modules.

List of 45+ Special Functions supported by the XTOOL D9S PRO, including Oil Reset, ABS Bleeding, BMS Reset, Adblue Reset, Throttle Relearn, Suspension, EPB Reset, TPMS Reset, SAS Reset, Coolant Bleeding, Power Balance, Gearbox Match, Injector Coding, Tire Size Reset, and more.

The image above lists over 45 special functions, covering a wide range of maintenance and service operations for various vehicle systems.

4. Maintenance

4.1. Cautions

  • Keep the device away from heat or fumes during use.
  • Avoid shaking or dismantling the unit to prevent damage to internal components.
  • Do not use hard or sharp objects on the LCD screen.
  • Do not use excessive force.
  • Do not expose the screen to strong sunlight for prolonged periods.
  • Keep the device away from water, moisture, high temperatures, or very low temperatures.
  • Calibrate the screen if necessary to ensure LCD performance accuracy.
  • Keep the main unit away from strong magnetic fields.

5. Troubleshooting

5.1. Lights on the device glow dimly

Solution:

  1. Check USB cables: Ensure original cables are used and they are functioning correctly.
  2. Connect KC501 with a 12V power supply and check the lights status.
  3. Check the USB socket conditions on both tablets/PCs and KC501 for damage.

5.2. KC501 connected to PC/laptop, but no response

Solution:

  1. Ensure "KC501 Studio" is already installed before connecting to PC.
  2. Check the lights on KC501. If not glowing or glowing dimly, refer to section 5.1.
  3. Open Device Manager on your PC. Check USB ports to see if KC501 is shown.
  4. If the device is not loaded properly: Shut down KC501 Studio, disconnect KC501, open file explorer, navigate to the KC501 Studio installation directory (e.g., C:\Program Files (x86)\Xtooltech\KC501Studio), open the "drivers" folder, and select the appropriate driver for your PC settings.
  5. Ensure all anti-virus software is shut down before installing the driver. The PC may show a threat alert; set it as trusted.

5.3. KC501 connected to tablet, but shows "not connected"

Solution:

  1. Check USB cables (refer to section 5.1 for details).
  2. Go to EEPROM Adapter > Read KC501 firmware, take screenshots of the results, and send them to Xtool aftersales services.
  3. If still not connected, check USB socket conditions on both devices.
  4. Alternatively, install KC501 Studio first and check if KC501 is recognized by the PC.

5.4. KC501 shows "The device bounded by (other S/N)" when programming

Solution: This KC501 has been used on other devices. Find a PC and contact Xtool aftersales services for assistance.

5.5. KC501 shows "Hardware not supported" on supported Xtool tablets

Solution: Ensure you have downloaded "IMMOBILIZER-KC501LIB" in the updates.

6. Specifications

ItemDescription
Display Size9.7 inches
Operating SystemAndroid 10.0
Processor4 Core 1.50GHz
Memory4G RAM, 128 ROM
Battery6400mAh, 7.2V lithium-polymer battery
Working Voltage9V-32V
Voltage (DC Port)DC 12V
Input Voltage (USB-B)5V (USB-B)
Wireless SupportWifi (2.4GHz & 5GHz Dual-Frequency)
Protocol CompatibilityCANFD, DoIP
External Testing CertificationCE
CertificationFCC, CE, CCC, CC
Item TypeAuto Key Programmer
MaterialPlastic
Item Weight2kg
Item Height3cm
Item Width22cm
Item Length31cm
Package DimensionsLength: 40cm, Width: 30cm, Height: 20cm
Package Weight5.5kg
Working Temperature-10~50°C (14~122°F)
Storage Temperature-20~60°C (-4~140°F)
Related Humidity< 90%
PortsDC charging port, USB-B port, DB26 port
Languages SupportedEnglish, German, Spanish, French, Polish, Portuguese, Russian, Italian, Turkish, Traditional Chinese, Japanese, Korean, Vietnamese, Arabic, Finnish, and more.

7. User Tips

  • For optimal performance and to avoid compatibility issues, always ensure your D9SPRO software and firmware are up-to-date. Regularly check for updates through the device's update function.
  • When performing sensitive operations like ECU programming or key programming, ensure the vehicle's battery is fully charged or connected to a stable power supply to prevent interruptions.
  • If you encounter issues with specific vehicle models or functions, consult the detailed support lists for key programming, EEPROM, and ECU support available on the XTOOL official website or within the device's documentation.
  • For FCA vehicles, remember that AutoAuth registration is required via AutoAuth's web platform, not XTOOL.
  • When working with EEPROM chips, pay close attention to pin 1 orientation to prevent damage.

8. Support & Contact

For any technical assistance or inquiries, please contact Xtool support:

Shenzhen Xtooltech Intelligent Co., Ltd.

  • Company Address: 17&18/F, Building A2, Creativity City, Liuxian Avenue, Nanshan District, Shenzhen, China
  • Factory Address: 2/F, Building 12, Tangtou Third Industrial Zone, Shiyan Street, Baoan District, Shenzhen, China
  • Fax: 0755-83461644

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.