Himist 2026 NEW Starry Night Light Projector

Contents

Himist 3D Galaxy Star Projector Night Light

Model: 2026 NEW Starry Night Light Projector (WH-E20)

1. Product Introduction

The Himist 3D Galaxy Star Projector Night Light transforms any room into a mesmerizing planetarium, projecting stunning starry skies, moons, and galaxies. It features an upgraded HD lens, 360° rotation, adjustable focus, and a Bluetooth speaker for an immersive experience. Ideal for children's rooms, parties, or creating a relaxing atmosphere.

1.1 Packing List

  • Projector lamp x 1
  • Disc x 1 (pre-installed)
  • Slide x 6 (or 12/18 depending on version)
  • Type-C Cable x 1
  • User Manual x 1

1.2 Key Features

  • HD Projection: Upgraded HD lens for clear and vivid projections.
  • Multiple Slides: Comes with various slides (e.g., Moon, Saturn, Galaxy, Nebula, Starry Sky) for diverse visual experiences.
  • 360° Rotation: Projects dynamic, slowly moving stars.
  • Adjustable Focus: Twist the top screw ring to adjust clarity based on projection distance.
  • Bluetooth Speaker: Connect via Bluetooth 5.0 to play music or white noise.
  • White Noise Function: Includes 10 white noise options for relaxation.
  • Timer Function: 15/30/60 minute automatic shutdown options.
  • Adjustable Angle: Project to ceiling, wall, or floor.
  • Rechargeable Battery: Built-in LITHIUM ION battery (1200mAh or 2400mAh depending on version).
Diagram showing key features: Shooting Star, White Noises, Real Galaxy, HD Lens, 360 degree rotation, Adjustable, BT Speaker, Angle adjust.
Figure 1: Overview of Projector Features

2. Setup

2.1 Initial Charging

Before first use, fully charge the projector lamp. Use the provided Type-C cable and a 5V/2A power adapter. The charging indicator light will be red during charging and turn green when fully charged.

Important: If the product is not used for a long time, disconnect the power supply. It is recommended to charge the battery every 30 days to prevent shortening its lifespan.

2.2 Changing Projection Discs (Slides)

Step-by-step instructions for changing projection slides: 1. Pull out the disc slot. 2. Remove old slide, insert new slide, and buckle it up. 3. Insert the disc slot back into the lamp.
Figure 2: Procedure for Changing Projection Discs
  1. Step 1: Gently pull the disc slot out of the projection lamp.
  2. Step 2: Remove the original projection slide from the slot. Insert the new projection slide, ensuring it is buckled up correctly.
  3. Step 3: Insert the disc slot back into the projection lamp.

Note: Please remove the protective film from the machine before using the Meteor Bluetooth projection light, otherwise the meteor effect will not be visible.

3. Operating Instructions

3.1 Projection Direction Adjustment

  • Projection to ceiling: Lay the projection lamp flat on its support.
  • Projection to wall: Stand the projection lamp on its support at any 360° angle.

3.2 Button Functions

Button/Control Function
Switch Key (Power Button)
  • Press and hold for 0.5s to Turn On/Off the projector.
  • When turned on, Bluetooth will activate synchronously.
  • Restore Factory Settings: After the device is powered on, press and hold for more than 3s.
Volume Adjustment Knob
  • Volume +: Turn clockwise to increase volume. (A prompt tone sounds at maximum volume).
  • Volume -: Turn counter-clockwise to decrease volume.
White Noise Button Short press to play/pause white noise music.
Next Music Button In Bluetooth music playing mode, short press to switch to the next song.
Projection Switch Button Short press to turn Off/On projection.
Timing Button
  • Press to cycle through 15 minutes, 30 minutes, 60 minutes automatic shutdown, or cancel automatic shutdown.
  • The corresponding timing indicator light will be on when the timer is active.
Projection Rotational Speed Adjustment Short press to cycle through rotation speeds: slow speed → medium speed → stop rotation.
Projection Image Definition Adjustment Knob Rotate clockwise and counter-clockwise until the center of the projection image becomes clear. This adjusts the focus.
Brightness Adjustment Press the third button (likely the Projection Switch Button, based on context) for two seconds to adjust brightness (30%-70%-100%).

3.3 Bluetooth Connection

  1. Turn on the projector using the Switch Key. Bluetooth will activate automatically.
  2. On your mobile phone, search for the Bluetooth device named "WH-E20".
  3. Connect to "WH-E20" to play music through the projector's speaker.
Image showing the projector connected via Bluetooth to a smartphone, playing music.
Figure 3: Bluetooth 5.0 Connectivity

3.4 Night Light Function

The night light function is integrated with the projector lamp. It cannot be controlled separately and will automatically extinguish after blinking about 705 times.

3.5 Product Demonstration Video

Video 1: Himist Galaxy Projector Demonstration

This video demonstrates the projector's various projection modes, slide installation, and overall operation, showcasing the dynamic starry sky and moon projections.

4. Maintenance

  • Cleaning: Use a soft, dry cloth to clean the projector's exterior. Do not use abrasive cleaners or solvents. Ensure the lens is kept clean for optimal projection clarity.
  • Environment: Do not use or store the projector in humid or high-temperature environments.
  • Long-term Storage: If the product will not be used for an extended period, disconnect the power supply and charge the battery every 30 days to maintain its health.
  • Lamp Protection: The projector will automatically shut down after 4 hours of continuous operation to protect the lamp bead and ensure a longer service life.

5. Troubleshooting

Problem Possible Cause / Solution
Projection image is blurry Rotate the Projection Image Definition Adjustment Knob (focus ring) clockwise or counter-clockwise until the image becomes clear. Ensure the lens is clean.
Bluetooth disconnects automatically The Bluetooth will automatically turn off if there is no connection for 10 minutes. Reconnect via your mobile device.
Projector not turning on / Low power prompt The battery may be low. Fully charge the device. If a low power prompt occurs, shut down and charge for more than 10 minutes before restarting.
Device unresponsive / Malfunction Try restoring factory settings: After the device is powered on, press and hold the Switch Key for more than 3 seconds.
Battery swelling or fever Immediately discontinue use. Do not attempt to disassemble or repair. Contact customer support.

6. Specifications

Attribute Value
Product NameChristmas 3D Galaxy Star Night Lights Projector
Model Number2026 NEW Starry Night Light Projector (WH-E20)
Brand NameHimist
Item TypeNight Lights / Projector
Body MaterialABS
Light SourceLED bulbs
Is Bulbs IncludedYes
Power SourceRechargeable battery
Battery TypeLITHIUM ION
Is Batteries IncludedYes
Is Batteries RequiredNo
Power Supply5V2A
Nominal Voltage4.5V
Voltage5v
Maximum Power10W Max
Wattage6-10W
Battery Capacity1200mAh / 2400mAh (depending on version)
Size142*116*182mm
Length20cm
ShapeRound
Power GenerationSwitch
Luminous Flux249-2000
Projection DistanceUp to 3 meters
Projection AreaUp to 40㎡ (2.5m distance, 20m² area)
Is Smart DeviceYes
CertificationCCC, CE, EMC, FCC, ROHS
OriginMainland China
Table showing different projector versions with varying slides, functions, battery capacity, and package contents.
Figure 4: Detailed Specifications by Version

7. User Tips

  • For the best visual experience, ensure the room is dark when using the projector.
  • Experiment with different projection distances and focus adjustments to achieve your desired image clarity and size.
  • The 360° rotatable body allows for versatile projection on ceilings, walls, or even floors, encouraging creative use.
  • Engage children by letting them manually switch film sheets, which can aid in their intellectual development.
  • Utilize the built-in white noise feature or connect via Bluetooth to play calming sounds or music for relaxation or sleep aid.
  • Always supervise children under the age of 14 when they are using the projector.
  • Avoid looking directly at the product's light source for prolonged periods, especially for children, to prevent potential eye strain or damage.

8. Warranty and Support

This product comes with a built-in lithium battery that is not replaceable. Do not attempt to disassemble, impact, squeeze, or put the battery into fire. If serious swelling or fever occurs, discontinue use immediately.

For any issues or questions regarding the product, please feel free to contact the seller or customer support. They are available to assist you with troubleshooting and provide solutions.

A detailed user manual in PDF format is available for download: View User Manual (PDF)

9. Safety Precautions

  • Do not disassemble, impact, squeeze, or put the battery into fire. If there is serious swelling and fever, do not continue to use.
  • Do not place in high-temperature environments.
  • Do not use in humid environments.
  • The light source is not replaceable. When the light source expires, please replace the whole lamp.
  • If consumers use a power adapter for power supply, they should purchase a matching power adapter that has obtained the CCC certification and meets the standard requirements, with an output of 5V/2A.
  • Children under the age of 14 should use it under adult supervision.
  • Amblyopia, astigmatism, children should not look at the product light source for a long time.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.