TUNGFULL X70200

Contents

TUNGFULL DC24V Mini Handheld Rotary Grinder User Manual

Model: X70200

Introduction

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your TUNGFULL DC24V Variable Speed Mini Handheld Rotary Grinder. Please read this manual thoroughly before first use and keep it for future reference.

TUNGFULL DC24V Mini Handheld Rotary Grinder with various accessories
The TUNGFULL DC24V Mini Handheld Rotary Grinder and included accessories.

Safety Instructions

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury.

  • Wear appropriate personal protective equipment (PPE) such as safety glasses, gloves, and a dust mask.
  • Ensure the power switch is OFF before connecting or disconnecting the power supply or changing accessories.
  • Keep the work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
  • Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.
  • Avoid accidental starting. Ensure the switch is in the off-position before plugging in.
  • Do not overreach. Keep proper footing and balance at all times.
  • Use the correct tool for your application. Do not force small tools or attachments to do the job of a heavy-duty tool.
  • Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.

Product Features

  • Precision Three-Jaw Chuck: Provides secure clamping for various accessories with a clamping range of 0.3-4.0 mm.
  • Stepless Speed Regulation: Allows for diverse speed control options to meet varied requirements for grinding, polishing, engraving, rust removal, drilling, and cutting.
  • Powerful Performance: Equipped with a solid copper motor, offering a high speed of up to 12,000 RPM for exceptional performance and durability.
  • Efficient Cooling System: Features a ventilation hole design for quick and circulating cooling, preventing overheating and ensuring durability.
  • Compact and Lightweight Design: Ergonomic design for comfortable handling and extended use.
  • Versatile Applications: Suitable for working on materials such as porcelain, wood, amber, motherboards, jade, and various metals.
Diagram showing key features: Chuck Tension Control, Stepless Speed Control, Ergonomic Design, Compact and Lightweight, Powerful Performance, Separate Power Switch.
Key features of the TUNGFULL Mini Grinder.

Setup Instructions

Before operating the mini grinder, ensure all components are correctly assembled and connected.

Package Contents:

  • Mini Electric Grinder (Main Unit)
  • Stepless Speed Control Power Supply (AC Adapter)
  • Chuck Wrench
  • Various Grinding/Drilling/Polishing Accessories (depending on package)
Micro metal electric grinder with stepless speed regulation, showing the grinder, power supply, and wrench.
The mini grinder with its stepless speed control power supply and chuck wrench.

Installing Accessories (Drill Bit/Grinding Head):

Refer to the diagram below for visual guidance.

Close-up of the precision three-jaw chuck with clamping range 0.3-4 mm.
The three-jaw chuck for secure clamping of accessories.
  1. Step 1: Loosen the Chuck

    Hold the main unit firmly. Use the provided chuck wrench to turn the chuck counter-clockwise to open the jaws. Ensure the jaws are open wide enough to insert your desired accessory.

  2. Step 2: Insert the Accessory

    Insert the shank of the drill bit or grinding head into the chuck. Ensure it is inserted as far as possible to provide maximum grip and stability.

  3. Step 3: Tighten the Chuck by Hand

    Turn the chuck clockwise by hand until the jaws firmly grip the accessory. The gap between the chuck jaws should be as small as possible.

  4. Step 4: Secure with Wrench

    If the accessory is not sufficiently tight by hand, use the chuck wrench to further tighten the chuck. Insert the wrench into the holes on the chuck and turn clockwise. If you cannot tighten it by hand, or if the grip is insufficient, you may use two pliers to grip the two parts of the chuck and twist in opposite directions to tighten securely.

    Important: The tightness of the chuck jaws determines the grip on the accessory. Ensure it is tightened securely to prevent the accessory from slipping during operation.

Diagram showing the internal solid copper motor of the grinder, highlighting its powerful performance and 12000 RPM speed.
Internal view of the powerful solid copper motor.

Connecting Power:

  1. Ensure the mini grinder's power switch is in the OFF position.
  2. Connect the DC output cable from the stepless speed control power supply to the power input port on the back of the mini grinder. The port has an outer diameter of 5.5mm and an inner diameter of 2.5mm.
  3. Plug the AC power cord of the speed control power supply into a suitable wall outlet (AC 100V-240V).
The mini grinder connected to its stepless speed regulation power supply with a portable switch.
The mini grinder connected to its speed control unit.

Operating Instructions

Powering On and Speed Adjustment:

  1. Once the accessory is securely installed and power is connected, flip the power switch on the mini grinder to the ON position.
  2. Use the rotary knob on the stepless speed control power supply to adjust the speed. Turn clockwise to increase speed and counter-clockwise to decrease speed. The speed can be adjusted from 1V to 24V output, corresponding to varying RPMs up to 12,000 RPM.
  3. Start with a lower speed for delicate tasks or when getting accustomed to the tool. Gradually increase the speed as needed for your application.

General Operation Tips:

  • Apply light and consistent pressure. Do not force the tool, as this can lead to poor results, damage to the tool or workpiece, and potential injury.
  • Allow the tool to reach full speed before contacting the workpiece.
  • Keep the tool moving to prevent burning or gouging the material.
  • For engraving and fine detail work, use lower speeds and appropriate bits.
  • For polishing and grinding, use suitable abrasive accessories and gradually increase speed.
  • Ensure proper ventilation in your workspace, especially when generating dust or fumes.
A hand holding the electric grinder performing engraving on a wooden surface, illustrating its use for grinding, polishing, engraving, rust removal, drilling, and cutting.
The mini grinder in use for various applications.
Four images showing different materials the grinder can be used on: Porcelain, Wood, Amber, and Motherboard.
Examples of materials suitable for processing with the grinder.

Maintenance

Regular maintenance ensures the longevity and optimal performance of your mini grinder.

  • Cleaning: After each use, disconnect the power and clean the tool with a soft, dry cloth. Remove any dust or debris from the ventilation holes to ensure proper cooling.
  • Chuck Care: Periodically inspect the chuck jaws for wear or damage. Keep the chuck clean and free of debris to ensure secure clamping.
  • Accessory Storage: Store accessories in a dry place to prevent rust and damage.
  • Power Cord Inspection: Regularly check the power cord and adapter for any signs of damage (cuts, fraying). Do not use if damaged.
  • Storage: Store the tool in a dry, safe place, out of reach of children.
Close-up of the grinder's ventilation holes with arrows indicating circulating airflow for quick cooling.
Ventilation holes for quick cooling, essential for tool durability.

Troubleshooting

ProblemPossible CauseSolution
Tool does not turn on.No power supply; Power switch is OFF; Loose connection.Check if the power adapter is plugged into a live outlet. Ensure the power switch on the grinder is ON. Verify all cable connections are secure.
Accessory slips in chuck.Chuck not tightened sufficiently; Accessory shank is dirty or damaged.Ensure the chuck is tightened securely with the wrench. Clean the accessory shank. Replace damaged accessories.
Tool overheats quickly.Ventilation holes blocked; Excessive pressure during operation; Continuous heavy use.Clean ventilation holes. Reduce pressure on the workpiece. Allow the tool to cool down during prolonged use.
Reduced power or inconsistent speed.Faulty power adapter; Motor wear; Loose power connection.Check power connections. If issues persist, the power adapter or motor may need inspection by a qualified technician.

Specifications

FeatureDetail
Product NameAll-Metal Multi-Function Electric Grinder
ModelX70200
BrandTUNGFULL
Clamping Range0.3 - 4.0 mm
Maximum Speed (No-Load)12,000 RPM
Power SourceDC (External Power Supply)
Input Voltage (Adapter)AC 100V-240V
Output Voltage (Adapter)DC 1V-24V 2A (Variable)
Input Current (Adapter)2A (2000MA)
Working Power2 - 48W
Frequency50/60HZ (for AC adapter input)
Max. Drilling Diameter4 mm
Product InterfaceOuter diameter 5.5MM * Inner diameter 2.5MM
AC Cable Length120 CM
DC Cable Length93 CM
Dimensions (Grinder Unit)Approx. 13.5 cm (Length) x 4 cm (Diameter)
UseHome DIY
Battery IncludedNo
CustomizableYes
Product parameters diagram showing dimensions (13.5cm length, 4cm diameter), clamping range (0.3-4.0mm), input voltage (AC 100-220V / DC 3-24V), maximum speed (12,000 RPM), and power consumption (15-80W).
Detailed product parameters and dimensions.

User Tips

  • For delicate work like PCB engraving or fine carving, ensure the chuck is extremely tight to prevent any wobble, which can affect precision.
  • When working with softer materials, start at a lower speed to avoid damaging the workpiece.
  • Consider using a flexible shaft attachment (if available separately) for enhanced maneuverability and reduced hand fatigue during intricate tasks.
  • Always test on a scrap piece of material before working on your final project to find the optimal speed and pressure.

Warranty and Support

For warranty information and technical support, please refer to the seller's policies or contact the Dutoofree Store directly. Keep your purchase receipt as proof of purchase.

A user manual in PDF format is also available for download at this link. Please refer to it for additional details and diagrams.

© 2024 TUNGFULL. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.