SHOVIA H7 LED Headlight Bulb

Contents

SHOVIA H7 LED Headlight Bulb User Manual

Model: H7 LED Headlight Bulb | Brand: SHOVIA

1. Introduction

Thank you for choosing the SHOVIA Dual Fans H7 LED Headlight Bulbs. These high-performance LED bulbs are designed to provide superior brightness, a perfect beam pattern, and enhanced driving safety. Featuring advanced CANBUS technology and efficient cooling, they offer a non-destructive upgrade for your vehicle's lighting system. This manual provides essential information for the proper installation, operation, and maintenance of your new LED headlight bulbs.

2. Safety Information

  • Always disconnect the vehicle's battery before performing any electrical work.
  • Wear appropriate safety gear, such as gloves and eye protection, during installation.
  • Ensure the bulbs are cool before handling them after operation.
  • Do not touch the LED chips directly, as this can damage them.
  • If you are unsure about any installation steps, consult a qualified automotive technician.
  • Keep out of reach of children.

3. Package Contents

  • 2 x SHOVIA H7 LED Headlight Bulbs
Two SHOVIA H7 LED Headlight Bulbs
Figure 1: Package contents - Two H7 LED Headlight Bulbs.

4. Specifications

Feature Specification
Socket TypeH7 LED Bulb
LED Chips16PCS 9084 CSP LED chips
Wattage1500W
Luminous Flux2,000,000LM (+800% Brighter than Halogen)
VoltageDC 12V-24V
Color Temperature6000K Cold White
CANBUSCanbus Turbo Auto Headlight (No Error)
Size1:1 Mini Automobile Lamp
Cooling SystemDual Fan (12,000 RPM), Aviation 6063 Aluminum Body, Double Fins, Temperature Control
Operating Temperature-45°C to 150°C (-49°F to 302°F)
Lifespan60,000 Hours
Waterproof RatingIP68
Car CompatibilityUniversal
CertificationCE
Warranty1 year
Product dimensions of the H7 LED bulb
Figure 2: Product dimensions for the H7 LED bulb.

5. Setup and Installation

The SHOVIA H7 LED Headlight Bulbs are designed for quick and easy plug-and-play installation, typically taking around 3 minutes per bulb. No modifications to the vehicle's wiring are usually required. The integrated CANBUS system helps prevent error messages in most compatible vehicles.

5.1 General Installation Steps (for H7 Sockets)

  1. Open the Dust Cover: Locate the headlight assembly and carefully open or remove the dust-proof cover.
  2. Disconnect the Power Cable: Unplug the power cord from the original halogen bulb.
  3. Release the Metal Spring: Gently press down and release the metal spring or clip that holds the original bulb in place.
  4. Remove the Original Bulb: Carefully remove the original car bulb from its socket.
  5. Install the LED Lamp: Insert the new SHOVIA H7 LED bulb into the headlight assembly. Ensure it is seated correctly and secured by the metal spring.
  6. Connect the Power Cable: Connect the power cable to the LED lamp. Ensure a secure connection.
  7. Close the Dust Cover: Reinstall the dust-proof cover to protect the headlight assembly.
Diagram showing H1, H4, H7 LED headlight bulb installation steps
Figure 3: Installation diagram for H1, H4, and H7 LED headlight bulbs.

5.2 Visual Installation Guide

Watch the official product video for a visual demonstration of the installation process and product features.

Video 1: Product demonstration and installation overview.

5.3 Key Installation Features

  • Plug & Play: Designed for easy, direct replacement of halogen bulbs.
  • CANBUS Compatibility: Built-in CANBUS decoder to prevent dashboard error warnings in most vehicles.
  • Compact Size: 1:1 mini design ensures a perfect fit in most headlight housings without interference.
Diagram illustrating Plug and Play LED features: Easy Installation, Longer Life, CANBUS No Error, +800% Brightness
Figure 4: Plug and Play LED features for easy installation.

6. Operating Instructions

Once installed, the SHOVIA H7 LED Headlight Bulbs operate automatically with your vehicle's lighting system. Simply turn on your headlights or fog lights as you normally would. The bulbs are designed to provide a consistent 6000K cold white light with a perfect beam pattern, ensuring optimal visibility and safety.

Comparison of low beam and high beam with clear cutting lines
Figure 5: Clear cutting line for low and high beam, enhancing safety by avoiding glare.
Beam pattern comparison showing superior light distribution of SHOVIA LED bulbs
Figure 6: Optimized beam pattern for wider and farther light area without glare.

7. Maintenance

The SHOVIA H7 LED Headlight Bulbs are designed for long-lasting performance with minimal maintenance. Their IP68 waterproof rating ensures protection against dust and water ingress.

  • Cleaning: If necessary, gently wipe the bulb's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
  • Inspection: Periodically check the bulbs for any signs of damage or loose connections.
  • Cooling System: The integrated dual fan cooling system is self-maintaining. Ensure the headlight assembly's dust cover is properly sealed to prevent debris from affecting the fan.
Illustration of IP68 waterproof performance against rain, dust, snow, and fog
Figure 7: IP68 Waterproof Performance for reliable operation in various weather conditions.
Diagram showing efficient cooling system with dual fan and aluminum body
Figure 8: Efficient cooling system with 12,000 RPM turbo fan and aviation 6063 aluminum body.

8. Troubleshooting

Problem Possible Cause Solution
Bulb does not light up Loose connection, incorrect polarity, faulty bulb, insufficient power. Check all connections. Ensure correct polarity (some vehicles may require flipping the connector). Test with another bulb if available. Verify vehicle's power supply.
Dashboard error message (e.g., bulb out warning) Vehicle's CANBUS system detects lower power draw from LED. The SHOVIA H7 LED bulbs have built-in CANBUS. If errors persist, some highly sensitive vehicles may require an additional external CANBUS decoder (resistor) (not included).
Flickering or intermittent light Unstable power supply, loose connection, CANBUS incompatibility. Check connections. Ensure stable voltage. If flickering persists, an external CANBUS decoder might be needed.
Poor beam pattern or glare Bulb not seated correctly in the housing, incorrect alignment. Re-seat the bulb, ensuring it is perfectly aligned and secured. Adjust the headlight assembly if necessary.

9. User Tips

  • Before purchasing, verify your vehicle's headlight socket type to ensure compatibility with H7 bulbs.
  • When installing, ensure the LED chips are facing horizontally (left and right) for the optimal beam pattern.
  • Test the lights before fully reassembling the headlight unit and dust covers.
  • For vehicles with projector lenses, these LED bulbs are generally highly effective in providing a sharp cutoff.

10. Warranty and Support

The SHOVIA H7 LED Headlight Bulbs come with a 1-year warranty from the date of purchase, covering manufacturing defects. For warranty claims or technical support, please contact your retailer or the SHOVIA customer service team.

For additional information and detailed diagrams, you may refer to the official user manual PDF available at: User manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.