1. Introduction
Thank you for choosing this Intelligent Car Information System. It is a comprehensive system of navigation and entertainment, also known as the Car-Machine Interconnection System. This system allows the car owner to connect their mobile phone for navigation and voice recognition. When parking, the USB can be used to listen to music or watch videos. While driving, the phone function can be used directly for navigation and music, eliminating the need to hold the mobile phone for calls, ensuring safety and convenience. The illustrations in this manual are for reference only; please refer to the actual system for details.
2. Safety Precautions
Please note that it is not permitted to operate the machine while driving, in order to comply with driving safety rules and traffic laws.
This machine is an electronic product; please observe the safety precautions of ordinary electronic devices. It is powered by a 12V-24V 5A vehicle power supply. Do not install the machine on a substandard power supply to avoid damage. Do not disassemble or assemble the unit without permission; installation and maintenance should be carried out by professional personnel. Do not modify or upgrade the system software without authorization. Do not touch the surface of the main unit with sharp or hard materials. Do not use in extreme environments; the normal operating temperature is -40°C to 70°C. Do not spill liquids or chemicals (such as water) on the machine. The company is not responsible for the loss or damage of personal data caused by incorrect user operation, product maintenance, replacement, or other unexpected circumstances, nor for other indirect losses caused thereby. The company reserves the right to ownership and final interpretation of the function manual, warranty card, and related materials.
3. Product Features
This Wireless CarPlay Android Auto Interface offers a range of features to enhance your in-car experience:
- Apple CarPlay: The iPhone's built-in car infotainment system, integrated with the central console knob, enables voice control for phone calls, messages, navigation, and music. Supports both wireless and wired connections.
- Android Auto: Google's original ecological Android car-machine interaction system, featuring voice control for phone functions, information, navigation, and music.
- Front/Rear/360 Input: The intelligent module supports video decoding and can be equipped with front view, rear view (with intelligent dynamic trajectory display and radar support), as well as a 360° panoramic view.
- Wireless Connectivity: Built-in 2.4G and 5.8G WIFI for stable connection and Bluetooth 5.0 Technology.
- Seamless Integration: Retains original car functions, including steering wheel buttons and central control panel. Long press the "BACK" button on the central control panel to switch to CarPlay.
- Navigation: Use GPS navigation apps like Google Maps, Waze, and Apple Maps with live traffic information.
- Audio Quality: Built-in DSP (Digital Signal Processor) with fully adjustable Audio EQ for optimal sound quality.
- Camera Support: Two RCA inputs allow for adding rear and right PAL/NTSC cameras. Supports HD 360 panoramic cameras with dynamic guidance lines and parking distance control, maintaining OEM parking style.
- USB Flash Play: Enjoy downloaded music and videos via USB.
- Lossless Installation: Plug and play, non-destructive installation without cutting wires.
Image: Overview of Wireless CarPlay Smart Module features including Bluetooth, CarPlay, Android Auto, Factory Protocol, Lossless Installation, Voice Control, Live Map, and Online Entertainment.
Image: Main product image showing the CarPlay interface on a car's display and the module unit.
4. Compatibility
This interface is compatible with Mercedes Benz NTG 6.0 MBUX systems and Porsche PCM 3.1 systems. Please verify your car model and original radio system before installation.
4.1 Mercedes Benz NTG 6.0 MBUX System Compatibility
| Car Model | Years | Screen Size |
|---|---|---|
| A-Class (W177) | 2019+ | 10.25-inch |
| B-Class (W247) | 2020+ | 10.25-inch |
| E-Class (W213) | 2020+ | 12.3-inch/10.25-inch |
| G-Class (W463) | 2019-2020 | 12.3-inch |
| V-Class (W447) | 2019+ | 10.25-inch |
| CLA(C118) | 2019+ | 10.25-inch |
| CLS(C257) | 2020+ | 12.3-inch/10.25-inch |
| GLA(H247) | 2019+ | 10.25-inch |
| GLB(X247) | 2019+ | 10.25-inch |
| GLC(X253) | 2020+ | 10.25-inch |
| GLS(X167) | 2019+ | 10.25-inch |
| GLE(W167) | 2020+ | 10.25-inch |
| EQA(H243) | 2020-2022 | 10.25-inch |
| EQB(X243) | 2020-2022 | 10.25-inch |
| EQC | 2020-2022 | 10.25-inch |
To determine if your vehicle is compatible, please check your original car radio homescreen menu picture. The system is compatible with original radio NTG 6.0. It is NOT compatible with NTG 4.5, NTG 4.7, NTG 5.0/5.1.
Image: Diagram showing how to identify compatible Mercedes Benz NTG 6.0 systems by checking the original car radio homescreen menu. Examples of compatible (NTG 6.0) and incompatible (NTG 4.5, 4.7, 5.0/5.1) interfaces are shown.
4.2 Porsche PCM 3.1 System Compatibility
| Model | Years | Screen Size |
|---|---|---|
| Cayenne/718 | 2010-2016 | 7" |
| Panamera | 2010-2016 | 7" |
| Macan | 2010-2016 | 7" |
| 911 | 2010-2016 | 7" |
Features for Porsche PCM 3.1: CarPlay, Android Auto, Mirror Link, U Disk, voice control, Reverse image.
Image: Diagram illustrating how to identify Porsche PCM 3.1, PCM 4.0, PCM 3.0, and CDR 4.0 systems by their button layouts. PCM 3.1 is compatible.
5. Package Contents
The package includes the following components:
- Main Module (Dimensions: 139mm x 92mm x 20mm)
- Power Cable
- LVDS OUT & LVDS IN Cable
- RCA & USB Cable
Image: Illustration of the main module with dimensions and included cables (Power Cable, LVDS OUT & LVDS IN, RCA & USB Cable).
6. Installation Manual
This product features a plug-and-play, non-destructive installation process, meaning no wire cutting is required. However, installation should ideally be performed by professional maintenance personnel to ensure correct setup and avoid damage.
6.1 Wiring Diagram
The following diagram illustrates the connections for the CarPlay interface module:
Image: Detailed wiring diagram showing connections from the main module (LVDS-IN, LVDS-OUT, CAMERA/USB, POWER/CAN) to the factory LVDS harness and factory power harness. This diagram is crucial for proper installation.
6.2 DIP Settings
The DIP switch settings must be configured according to your specific car model and screen size. Refer to the table below for the correct DIP switch configuration.
| Car Model | Year | Screen Size | DIP |
|---|---|---|---|
| A-Class (W177) | 2019+ | 10.25-inch | 236 |
| B-Class (W247) | 2020+ | 10.25-inch | 236 |
| E-Class (W213) | 2020+ | 12.3-inch/10.25-inch | 2345/2346 |
| G-Class (W463) | 2019-2020 | 12.3-inch | 236 |
| V-Class (W447) | 2019+ | 10.25-inch | 236 ON (Connect ACC) |
| CLA(C118) | 2019+ | 10.25-inch | 236 |
| CLS(C257) | 2020+ | 12.3-inch/10.25-inch | 2345/236 |
| GLA(H247) | 2019+ | 10.25-inch | 236 |
| GLB(X247) | 2019+ | 10.25-inch | 236 |
| GLC(X253) | 2020+ | 10.25-inch | 236 |
| GLS(X167) | 2019+ | 10.25-inch | 236 |
| GLE(W167) | 2020+ | 10.25-inch | 236 |
| EQA(H243) | 2020-2022 | 10.25-inch | 236 |
| EQB(X243) | 2020-2022 | 10.25-inch | 236 |
| EQC | 2020-2022 | 10.25-inch | 236 |
Note: Please ensure that the dial is set to "ON". After changing the DIP Settings, please reboot the decoder box for the changes to take effect.
7. Operating Instructions
7.1 Button Control
The system integrates with your original car's steering wheel buttons and central control panel. Refer to the diagrams below for button functionalities.
| Button | Operation | Function |
|---|---|---|
![]() |
Short press | Answer the phone |
![]() |
Short press | Hang up the phone |
![]() |
Topspin | Increase the volume |
![]() |
Backspin | Decrease the volume |
![]() |
Long press | Switch between OEM screen and interface screen |
![]() |
Double Click | Switch between OEM screen and interface screen |
![]() |
Swipe/Click | Control function |
![]() |
Touch screen | Control function |
*Before entering the system, please switch the original car multimedia audio to AUX. The above functions may differ in some models; please refer to the actual situation.
Image: Shows how the system retains original car functions, specifically highlighting steering wheel buttons for volume and voice awakening, and the central control panel for switching to CarPlay.
Image: Demonstrates how to switch between the factory OEM car system and the CarPlay system by long-pressing the "back" button on the car knob. Shows Apple CarPlay and Android Auto interfaces.
7.2 Wireless Connection (CarPlay / Android Auto)
The system supports both wireless and wired connections for CarPlay and Android Auto. For optimal audio performance, ensure your vehicle's audio system is set to Bluetooth music mode.
- Pairing:
- Turn on your phone's Bluetooth and Wi-Fi.
- On your phone, select the Bluetooth device name "CAR Audio_XXXX" (where XXXX is a unique identifier).
- Confirm pairing when prompted.
- Once paired, the system will establish a Wi-Fi connection for data transmission. The Bluetooth connection may disconnect to avoid interference, which is normal.
- Audio Source: Ensure your iPhone's sound source is set to the original car radio (MBUX or CAR BT).
Image: Shows the process of connecting a smartphone to the CarPlay module via Bluetooth, with the module displaying "AnyFar's iPhone Connected" and the phone showing Bluetooth pairing steps.
Image: Explains the Bluetooth audio output process: 1. Pair Car Bluetooth, 2. Connect CarPlay, 3. Sound Output via MB Bluetooth or CAR BT. Highlights reduced interference and faster sound response.
Image: Demonstrates the Wireless CarPlay interface on the car screen, showing seamless integration with navigation, music, and voice calls.
Image: Shows the Wireless Android Auto interface, emphasizing wired and wireless connectivity, navigation, music, and voice commands for safer driving.
Image: Illustrates intelligent voice control with "Hey Siri" for Apple CarPlay and Google Assistant for Android Auto, enabling hands-free operation for safer driving.
7.3 External Settings (Rear View Camera)
This CarPlay interface supports aftermarket camera input for clear rear view imagery. If you are installing an aftermarket camera that supports reversing trajectory lines, you may need to adjust system settings.
- Enter the system settings:
- Click "Factory mode" -> "Advanced mode".
- Enter the password "888888".
- Go to "MCU setup" and uncheck the "A0" option.
- Return to the previous level and click "Restart system" to enable the reversing rear view function.
- Radar and Trajectory:
- If your aftermarket camera supports reversing trajectory lines, uncheck the "A1" box in the MCU setup to display them.
- For the aftermarket radar option, uncheck the "A2" box to use it.
Image: Wiring diagram for connecting a rear view camera. Shows connections for POWER CAMERA/CAN/USB, LVDS OUT/INPUT, Rear Camera Detect, CAM F_Video, CAM B_Video, and GND.
Image: Demonstrates the reverse image function, supporting original camera, reverse camera reversing trajectory, and parking sensors.
Image: Shows compatibility with both factory and aftermarket rear cameras, displaying the parking assist lines on the screen.
8. Specifications
| Parameter | Value |
|---|---|
| Operating Voltage | 9-16V, 14.4V (rated) |
| Operating Temperature | -30°C to +75°C |
| Power Consumption Current | 1A (rated), 3A (Max) |
| Quiescent Current | Less than 3mA |
| Charging Current | ≤2A (When USB charging current >1A, the host machine activates circuit protection to control current within 15A to prevent product burning) |
| Storage Temperature | -30°C to +85°C |
| Ambient Humidity | ≤98% (at 45°C), 65±5% (rated) |
| Package Length | 27 cm |
| Package Width | 21 cm |
| Package Height | 12 cm |
| Package Weight | 0.776 kg |
9. Troubleshooting
- Why does the Box's Bluetooth disconnect?
The system uses Bluetooth for initial device information confirmation, then establishes a Wi-Fi connection for data transmission. To avoid interference, the Bluetooth connection will disconnect. This is normal operation.
- I cannot connect to CarPlay, but Bluetooth is already paired.
Please forget the device's Bluetooth connection and reset Wi-Fi on your iPhone: Go to Settings > General > Transfer or Reset [Device] > Reset > Reset Network Settings.
- Why is the wireless CarPlay connection unstable?
- Ensure that the mounted position of the CarPlay box is not blocked by metal components, as this can impair Wi-Fi signal transmission.
- Switch the Wi-Fi channel: Enter the CarPlay box settings, then go to Factory Mode > Connectivity Settings > Hotspot Band. Select 1, 6, or 11, depending on your current region, to find a more stable channel.
10. User Tips
- For optimal sound quality, ensure your car's audio system is set to AUX mode before using CarPlay or Android Auto.
- When experiencing connectivity issues, try resetting your phone's network settings as a first troubleshooting step.
- Consider the placement of the main module carefully to avoid signal interference from metal objects in the car.
11. Support & Warranty
For any technical issues or support inquiries, please contact:
Email: techsupport@anyfar.com
This product comes with a warranty. Please refer to the included warranty card and related materials for details on coverage and terms.
A user manual in PDF format is also available for download: View User Manual (PDF)

