Introduction
Thank you for choosing the YEMEKE 5V USB RGBIC Round Neon Rope Light. This product is a versatile and flexible LED lighting solution designed for various decorative and ambient lighting applications. Featuring RGBIC full-color capabilities, smart app control, and IP67 waterproofing, it offers dynamic lighting effects for both indoor and outdoor environments. Please read this manual carefully before installation and use to ensure proper operation and longevity of your device.
Package Contents
Please check the package for the following items:
- 1 x 5V USB RGBIC Round Neon Light Strip (selected length)
- 1 x 24-Key IR Remote Control (CR2025 battery not included)
- 1 x Set of Buckle Screws (for mounting)

Image: Contents of the product package including the coiled neon light, remote control, mounting hardware, and instruction manual.
Specifications
| Feature | Description |
|---|---|
| Item Name | 5V RGB-IC Round Reticulate Led Neon Light |
| Material | 360 Degree Round Silicon Tube |
| Tube Diameter | 16mm |
| Input Voltage | DC5V USB |
| Available Lengths | 1m, 2m, 3m, 4m, 5m |
| Power Consumption | 2.88W/m |
| LED Quantity | 67 LEDs/meter |
| Colors | RGB Full Color, Dream Color (RGBIC) |
| Beam Angle | 360° |
| Protection Rate | IP67 Waterproof (Light strip only; power plug must not be in water) |
| Control Method | Smart APP Control (Bluetooth), Button Control, 24-Key IR Remote Controller |
| Luminous Flux | 249-2000 Lumens |
| Average Life | 30,000 hours |
| Certification | EMC, ROHS, LVD, CE |
| LED Chip Brand | Epistar |
| LED Chip Model | SMD2835 |
| Is Smart Device | Yes |
Setup
Important Safety Notes:
- The supply voltage for this product is strictly DC 5V USB. Using any other voltage will cause permanent damage to the light strip.
- The IR Remote Controller requires a CR2025 battery, which is not included in the package due to security checks. Please purchase and insert one before use.
- The light strip is IP67 waterproof, but the USB power plug and controller are NOT waterproof. Ensure the power plug and controller are kept dry and away from water.
- Do NOT cut the light strip. It is not designed to be cut, and doing so will damage the product and void any potential support.
Installation Steps:
- Unpack: Carefully remove all components from the packaging.
- Prepare Power Source: Ensure you have a compatible DC 5V USB power adapter (e.g., phone charger, USB port on a computer or power bank).
- Mount the Light Strip:
- Determine the desired placement for your neon light.
- Use the provided buckle screws to secure the light strip in place. Position the clips evenly along the length of the strip for stable mounting.

Image: Close-up view of the transparent mounting clips and screws, demonstrating how they secure the neon light strip.
- Connect Power: Plug the USB connector of the light strip into your DC 5V USB power adapter.
- Prepare Remote Control: If not already present, open the battery compartment of the 24-key IR remote control and insert a CR2025 battery with the correct polarity.
Operating Instructions
Using the 24-Key IR Remote Control:
Point the remote control directly at the USB controller for optimal response.
- ON/OFF: Press the red power button to turn the lights on or off.
- Color Selection: Use the colored buttons (e.g., Red, Green, Blue, White) to select static colors.
- Brightness Adjustment: Use the brightness up/down buttons to increase or decrease the light intensity.
- Mode Selection: Cycle through various dynamic modes (e.g., flash, fade, jump) using the mode buttons.
- Speed Adjustment: For dynamic modes, use the speed up/down buttons to adjust the effect speed.
Using Smart APP Control (Bluetooth):
- Download App: Scan the QR code on the USB controller or refer to the product packaging/instructions for the specific app name (e.g., 'Symphony Controller' as seen in images) and download it from your device's app store.
- Enable Bluetooth: Ensure Bluetooth is enabled on your smartphone.
- Pair Device: Open the app. It should automatically detect and connect to your neon light strip. If not, follow the app's instructions to add a new device.
- Control Features: Once connected, you can access a wide range of features:
- Color Palette: Select from a vast spectrum of colors.
- Dynamic Scenes/Effects: Choose from pre-set scenes or customize your own lighting effects.
- Music Synchronization: The lights can react to music played through your phone's microphone or stored on your device.
- Timer Function: Set schedules for the lights to turn on/off automatically.
- DIY Modes: Create and save your personalized lighting patterns.

Image: Screenshots of the mobile application interface, showing options for color selection, scene modes, music sync, and custom effects, indicating Bluetooth connectivity.
Maintenance
- Cleaning: To clean the light strip, gently wipe it with a dry, soft cloth. Do not use abrasive cleaners or solvents. Ensure the power is disconnected before cleaning.
- Water Exposure: While the light strip is IP67 waterproof, avoid submerging the USB plug or controller in water. If used outdoors, ensure the controller and plug are protected from rain and moisture.
- Storage: When not in use for extended periods, disconnect the power and store the light strip in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light strip does not turn on | No power, incorrect voltage, faulty connection | Ensure USB plug is securely connected to a DC 5V USB power source. Check if the power source is working. |
| Remote control not working | Dead battery, no line of sight, remote too far | Replace CR2025 battery. Point remote directly at the USB controller. Ensure you are within effective range. |
| App cannot connect to the light strip | Bluetooth off, app issue, device not discoverable | Ensure Bluetooth is enabled on your phone. Restart the app and try again. Unplug and replug the light strip to reset it. |
| Lights are flickering or showing incorrect colors | Unstable power, app/remote interference | Ensure a stable DC 5V power supply. Try resetting the light strip by unplugging and replugging it. Re-pair with the app if necessary. |
User Tips
- Do Not Cut: The neon rope light is designed as a continuous unit and cannot be cut. Attempting to cut the strip will damage it permanently. Please select the appropriate length when purchasing.
Warranty and Support
For any issues, questions, or support needs regarding your YEMEKE 5V USB RGBIC Round Neon Rope Light, please contact the seller or retailer from whom you purchased the product. They will be able to provide assistance and information regarding warranty claims and technical support.