1. Important Safety Information
WARNING: Please mind potential fire risk and strictly follow this instruction manual for charging, storage, and disposal. Inaccurate handling of lithium-ion batteries may cause leakage, heat, smoke, explosion, or fire, leading to performance deterioration or failure. Always follow instructions carefully.
General Safety Precautions:
- Use only the dedicated charger provided or specified for this battery.
- Do not charge the battery using an electric outlet directly or in reverse polarity.
- Do not leave the battery near fire or heat sources, or throw it into fire.
- Avoid submerging the battery in water or spraying it with water.
- Do not store or use the battery in places where temperatures may exceed 60°C (e.g., inside a car on a hot day).
- Do not store the battery with metallic objects (keys, necklaces, coins) to prevent short circuits.
- Do not short-circuit the positive (+) and negative (-) terminals.
- Do not pierce, heat, hit, step on, disassemble, or modify the battery.
- Do not use damaged or deformed batteries.
- Keep the battery out of reach of children.
- If liquid leaks from the battery and comes into contact with skin or clothing, wash immediately with fresh water. If it gets into eyes, do not rub; wash with clean water and seek medical attention immediately.
- For disposal, check your local authority's website for information and dispose of the lithium-ion battery safely in accordance with applicable legal requirements.

Figure 1: Battery Management System (BMS) Safety Protection features including overdischarge, overcharge, current, short circuit, equilibrium, and temperature protection.
2. Product Overview
The LiitoKala 48V30Ah Lithium Battery is designed for electric bicycles, e-scooters, and power tools, featuring a robust 13S9P 18650 cell structure and an integrated Battery Management System (BMS) for enhanced safety and performance.

Figure 2: Key features including a foldable handle for portability, a mechanical anti-theft lock for security, and a three-pin power connector for integrated charging and discharging.
Key Features:
- Foldable Handle: Made of metal with a smooth surface for easy carrying.
- Anti-theft Lock: Mechanical lock for security, simple and sturdy.
- Three-pin Power Connector: Integrated for charging and discharging, supports 54.6V standard charger, max instantaneous current 60A, continuous current 30A.
- Professional BMS: Monitors cell health, protects against overcharging, over-discharging, overcurrent, short circuit, and temperature fluctuations.
3. Setup and Installation
Unpacking:
Carefully remove the battery from its packaging. Inspect for any visible damage. If any damage is found, do not use the battery and contact support.
Initial Charge:
It is recommended to fully charge the battery before its first use. Refer to the