E-SIMPO E27

Contents

E27 Plug-in Lamp Holder (Socket Adapter) User Manual

Model: E27

Brand: E-SIMPO

Product Overview

The E-SIMPO E27 Plug-in Lamp Holder is a versatile light bulb socket adapter designed to convert standard wall outlets into E27 lamp sockets. It is ideal for temporary lighting, night lights, plant grow lights, or various DIY lamp projects. This adapter features a compact design, easy plug-and-play installation, and multi-regional plug compatibility (EU, US, UK types).

A built-in On/Off control switch provides convenient operation. The adapter is constructed from fire-resistant ABS plastic with copper alloy contacts for high conductivity and corrosion resistance, ensuring long-term stability and safety.

E27 Plug Lamp Base Adapter with EU, US, UK plug types and a close-up of the on/off switch.
Figure 1: E27 Plug Lamp Base Adapter showing EU, US, and UK plug variants, and the integrated On/Off switch.

Specifications

Parameter Details
Product NameE27 Edison Screw Plug-in Lamp Holder / Light Socket Adapter
Item TypeLamp Bases
Model NumberE27
Rated VoltageAC 110V - 250V
Rated CurrentMax 4A
Max Power Load100W (incandescent/halogen); Recommended ≤25W for LED bulbs
Socket TypeE27 (Large Edison Screw)
Plug TypeEU Type C (2-pin), US Type A/I (2-pin flat), UK Type G (3-pin)
Insulation MaterialFire-retardant ABS plastic
Contact MaterialCopper alloy (high conductivity, corrosion-resistant)
Operating Temperature-10°C ~ +45°C
CertificationsCE, RoHS (regional approvals as per plug type)
ColorWhite
Dimensions (L×W×H)75mm × 50mm × 50mm (slight variations by plug type)
Net Weight30g
Switch OptionAvailable with built-in rocker switch (marked I/O for ON/OFF)
Dimensions of the E27 Plug Lamp Base Adapter: 5cm, 4cm, 6cm.
Figure 2: Physical dimensions of the E27 Plug Lamp Base Adapter.

Setup

  1. Safety Check: Before use, carefully inspect the adapter for any signs of cracks, damage, or exposed wires. If any damage is found, do not use the adapter.
  2. Plug Compatibility: Ensure that the plug type of your adapter (EU, US, or UK) matches the wall outlet standard in your country.
  3. Install the Bulb: Screw an E27 bulb (LED, CFL, or incandescent) firmly into the socket. Avoid overtightening to prevent damage to the bulb or socket.
E27 Plug Lamp Base Adapter, US plug type. E27 Plug Lamp Base Adapter, UK plug type.
Figure 3: Examples of US and UK plug type adapters.

Operating Instructions

Once the E27 bulb is securely installed and the adapter is plugged into a compatible wall outlet, you can control the light using the integrated rocker switch. The switch is marked 'I' for ON and 'O' for OFF.

  • Press the switch to the 'I' position to turn the light ON.
  • Press the switch to the 'O' position to turn the light OFF.

Safety & Warnings

  • Indoor Use Only: This adapter is designed for indoor use. Do not use it in wet locations, bathrooms, or outdoors unless explicitly rated for moisture resistance.
  • Load Limit: Do not exceed the maximum rated power of 100W. Overloading the adapter may cause overheating, melting, or fire hazards. For LED bulbs, a recommended maximum of 25W is advised.

Maintenance

The E27 Plug-in Lamp Holder requires minimal maintenance. To ensure its longevity and safe operation:

  • Keep the adapter clean and free from dust. Wipe with a dry, soft cloth.
  • Avoid exposing the adapter to extreme temperatures or direct sunlight for prolonged periods.
  • Regularly check for any visible damage to the casing or plug pins. Discontinue use if damage is observed.

Troubleshooting

Problem Possible Cause Solution
Bulb does not light up
  • Bulb is loose or faulty.
  • Adapter not fully plugged in.
  • Wall outlet has no power.
  • Built-in switch is off.
  • Tighten or replace the bulb with a known working one.
  • Unplug and re-seat the adapter in the outlet.
  • Check the wall outlet with another device.
  • Toggle the built-in switch to the "I" (ON) position.
Adapter gets too hot
  • Exceeding the maximum power load.
  • Using high-heat incandescent/halogen bulbs.
  • Poor ventilation.
  • Reduce bulb wattage (use LED bulbs instead).
  • Replace with lower heat LED bulbs.
  • Ensure the adapter is not covered or enclosed.

Warranty & Support

This E-SIMPO E27 Plug-in Lamp Holder comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for warranty claims.

For further assistance or detailed information, you may refer to the official user manual available in PDF format. A digital copy of the user manual can be found at the following link: E27 Plug-in Lamp Holder User Manual (PDF).

User Tips

  • Consider using energy-efficient LED bulbs with this adapter to minimize heat generation and reduce electricity consumption.
  • When using the adapter for temporary lighting, ensure it is placed in a stable position to prevent accidental dislodgement.
  • If you frequently move the adapter between different regions, double-check the plug compatibility each time to avoid damage.
Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.