FLSUN T1 PRO

Contents

FLSUN T1 PRO 3D Printer Nozzle User Manual

Model: T1 PRO | Brand: FLSUN

1. Introduction

This manual provides essential information for the safe and effective use of your FLSUN T1 PRO 3D Printer Nozzles. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of the product.

Four FLSUN T1 PRO brass nozzles with sizes 0.2mm, 0.3mm, 0.4mm, and 0.5mm clearly marked.

Figure 1: FLSUN T1 PRO Brass Nozzles (various sizes)

2. Safety Instructions

  • Read carefully before installation and operation.
  • Keep accessories dry and clean; avoid dust, moisture, and high temperatures.
  • Do not touch hot components (nozzles, heaters) during operation.
  • Unplug the power supply before replacing or maintaining accessories.
  • Keep out of reach of children.

3. Compatibility

  • This accessory is compatible with FLSUN 3D printers.
  • Confirm model and size before purchase to avoid installation errors.

4. Setup (Installation Guide)

  1. Power off the printer and disconnect power.
  2. Remove old or damaged accessories.
  3. Install new parts according to the original structure.
  4. Ensure screws are tightened and connections are stable.
  5. Calibrate the printer after installation.

5. Operating (Usage Notes)

  • Use only high quality filaments to prevent clogging.
  • Do not overload or force components during operation.
  • Regularly clean and lubricate moving parts (rods, bearings, gears).
  • Replace worn parts in time to ensure printing quality.

6. Maintenance

  • Clean nozzles, heat beds, and fans regularly.
  • Store accessories in a dry, dust-free environment.
  • Avoid impact or excessive bending of fragile parts.

7. Troubleshooting

  • Clogged nozzle: Clean with needle or cold pull.
  • Loose connection: Reinstall and tighten screws.
  • Abnormal noise: Check for friction or misalignment.
  • Poor printing quality: Calibrate bed, replace worn parts.

8. Specifications

FeatureDetail
Model NumberFLSUN T1 PRO
Item TypeNozzle
MaterialBrass
Available Nozzle Sizes0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm
Package Contents4 x Print Heads (selected size)
Package Dimensions (L x W x H)13 cm x 8 cm x 5 cm
Package Weight0.05 kg
Close-up view of a single 0.4mm FLSUN T1 PRO brass nozzle, showing the threaded base and conical tip.

Figure 2: Detailed view of a FLSUN T1 PRO Nozzle

9. User Tips

No specific user tips were available from customer reviews or Q&A for this product.

10. Warranty & Support

Warranty

  • This product is for replacement use only.
  • Warranty does not cover damage caused by improper use, modification, or external force.

Contact Support

For further assistance or inquiries, please contact FLSUN support:


Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.