Road Top Z4 E89 CIC EVO System

Contents

Road Top CarPlay Wireless Android Auto Module User Manual

Model: Z4 E89 CIC EVO System | Brand: Road Top

1. Introduction

This manual provides comprehensive instructions for the installation, setup, and operation of your Road Top CarPlay Wireless Android Auto module for BMW Z4 E89 vehicles equipped with CIC or EVO systems, manufactured between 2009 and 2018. This module enhances your driving experience by integrating modern smartphone functionalities directly into your car's original display.

Road Top CarPlay Wireless Android Auto module installed in a BMW Z4 E89 dashboard, showing the CarPlay interface.

Figure 1: Road Top CarPlay module interface on BMW Z4 E89 display.

2. Compatibility

This module is designed for BMW Z4 E89 models from 2009-2018 with either CIC or EVO systems. It is crucial to verify your car's system type and screen size before installation.

2.1 Compatible Models and Systems

The module supports various BMW models with CIC systems. Please refer to the table below for specific compatibility details:

Table showing compatible BMW models (X5 E70, X6 E71, X1 E84) with CIC system, years, and screen sizes.

Figure 2: Compatible BMW models and system types.

2.2 Identifying Your Car's System

To ensure proper fitment, check your original car radio homescreen menu and the LVDS port on the back of the OEM car screen. The module is compatible with original radio CIC and EVO systems, but not with NBT, EVO ID5, or EVO ID6 systems.

Diagram illustrating how to identify compatible CIC and EVO systems by checking the original radio menu and LVDS port type (4 PIN for CIC, 6 PIN for EVO). Also shows incompatible NBT, EVO ID5, and EVO ID6 systems.

Figure 3: Guide to identifying your car's system type.

3. Package Contents

The following items are included in your Road Top CarPlay Wireless Android Auto module package:

Image showing all included accessories: Power cable, LVDS cable, USB cable, Wi-Fi antenna, Mic extension cable, External mic, and the CarPlay Box.

Figure 4: Product Accessories List.

  • CarPlay Decoder Box
  • Power Cable Harness
  • LVDS Cable (2 pcs)
  • USB-AV Cable
  • Wi-Fi Antenna
  • Mic Extension Cable
  • External Mic

Note: The exact accessories may vary slightly depending on your specific vehicle model.

4. Installation Guide

Careful installation is essential for optimal performance. If you are unsure about any steps, it is recommended to seek professional assistance.

4.1 Toggle Switch Setup

Before connecting the module, configure the toggle switches on the CarPlay decoder box according to your car's screen size. This is a critical step for proper display functionality.

Close-up of the CarPlay module highlighting the toggle switch with numbers 1-8 and ON/OFF positions.

Figure 5: Location of the toggle switch on the CarPlay module.

4.1.1 For 6.5 inch screen

Diagram showing toggle switch settings for a 6.5-inch screen. Switches 1, 2, 3, 4, 5, 6, 7, 8 are set to ON, OFF, ON, ON, ON, ON, ON, ON respectively.

Figure 6: Toggle switch settings for 6.5-inch screen.

4.1.2 For 8.8 / 10.2 inch screen

Diagram showing toggle switch settings for an 8.8 or 10.2-inch screen. Switches 1, 2, 3, 4, 5, 6, 7, 8 are set to OFF, ON, ON, ON, ON, ON, ON, ON respectively.

Figure 7: Toggle switch settings for 8.8 / 10.2-inch screen.

4.2 Dashboard Removal

Dashboard removal is required to access the head unit and other necessary connections. For detailed visual guidance on dashboard removal, please scan the QR code below to view a YouTube video tutorial:

QR code for dashboard removal video for 3 & 5 & 7 Series BMW

QR Code: Dashboard Removal (3 & 5 & 7 Series)

QR code for dashboard removal video for 1/3/6 Series BMW

QR Code: Dashboard Removal (1/3/6 Series)

QR code for dashboard removal video for X1 X3 X5 X6 BMW

QR Code: Dashboard Removal (X1 X3 X5 X6 Series)

4.3 Cables Connection Overview

The following diagram illustrates the general wiring connections for the CarPlay module:

Detailed wiring diagram showing connections between OEM head unit, CarPlay decoder box, OEM iDrive, and various cables including power, LVDS, and iDrive CAN.

Figure 8: General cable connection diagram.

4.3.1 Power Cable Connection

Connect the new cable harness to the OEM original power cable and the head unit. If your car has a fiber optic cable, you must move the original fiber optic cable to the new harness.

Image demonstrating how to connect the power cable harness and transfer the fiber optics plug from the OEM connector to the new harness.

Figure 9: Power cable and fiber optic cable connection.

4.3.2 LVDS Cable Connection

Proper LVDS cable connection is crucial. Incorrect connections can lead to a black screen.

  1. Connect the new LVDS cable 1 to the head unit and the "LVDS IN" port of the CarPlay box.
  2. Connect the new LVDS cable 2 to the original LVDS cable and the "LVDS OUT" port of the CarPlay box.
Diagram showing the LVDS IN and LVDS OUT ports on the CarPlay module and their connections to the OEM screen and head unit.

Figure 10: LVDS cable connection details.

4.3.3 iDrive CAN Cable Connection

  • Connect the C# iDrive CAN cable to the A# carplay low CAN.
  • Connect the B# Head Unit CAN to the D# Reconnect original car's CAN.
Diagram illustrating the iDrive CAN cable connections, showing the iDrive unit and the various CAN cable connectors.

Figure 11: iDrive CAN cable connections.

4.3.4 WiFi Antenna and USB-AV Cable Connection

Connect the WiFi antenna and USB-AV cable to the CarPlay module.

Image showing the USB-AV cable and WiFi antenna connected to the CarPlay module.

Figure 12: WiFi antenna and USB-AV cable connections.

Important Note on WiFi Antenna Placement:

The WiFi antenna cannot be placed close to metal objects. If the WiFi antenna is near metal objects, the WiFi signal will be lost, affecting wireless CarPlay/Android Auto performance.

4.3.5 Mic Cable Connection

The microphone connection depends on whether your car has an original OEM mic.

For Cars with Original OEM Mic:

Use the provided mic extend cable to connect to your car's original mic. Identify the male and female plugs of the OEM mic and connect accordingly.

Diagram showing how to connect the mic extension cable to the original OEM mic, identifying male and female plugs.

Figure 13: Connecting to original OEM mic.

For Cars without Original OEM Mic:

If your car does not have a factory mic, you can use the aftermarket mic provided. The aftermarket mic should be installed close to the driver's position for optimal voice pickup.

Image showing the aftermarket mic and its connection to the power cable.

Figure 14: Aftermarket mic connection.

4.3.6 Decoder Box Placement

The CarPlay interface decoder box should be placed behind the head unit host or on the OEM head unit. Alternatively, it can be placed in the glove box.

Images showing possible placements for the decoder box: on the OEM head unit or beside it.

Figure 15: Decoder box placement options.

5. Operation

5.1 Dual-System Switching

After cable connection, you can switch between the original NBT/CIC/EVO system and the CarPlay system by long-pressing the "MENU" button on your iDrive knob.

Image showing the iDrive controller with the MENU button highlighted, used for switching between original car system and CarPlay.

Figure 16: Switching between systems using the iDrive MENU button.

5.2 Sound Setup

For sound output from the CarPlay system, follow these steps:

  1. Disconnect any existing Bluetooth connection between your phone and your car.
  2. Connect the decoder's EXT-AUX cable to your car's AUX port.
  3. On your original BMW System, navigate to the "Multimedia" interface.
  4. Select "External devices" and then choose "AUX front".
  5. Keep the original NBT/CIC/EVO system set to "AUX front".
  6. Long-press the "MENU" button from the iDrive knob to switch into the decoder menu.
Image showing the AUX IN port in a BMW console and the EXT-AUX cable connection.

Figure 17: AUX cable connection.

5.3 Bluetooth Setup

To enable Bluetooth functionality for calls and audio, ensure the "use car's BT channel" setting is turned ON in the CarPlay module's settings. Then, connect your phone to the original car's Bluetooth. For Airplay and Autolink functions, you may need to turn OFF "using car's BT channel" and use AUX for sound transfer.

Screenshots showing the Bluetooth settings within the CarPlay module and the original BMW system, highlighting the 'use car's BT channel' option.

Figure 18: Bluetooth settings for the CarPlay module.

5.4 CarPlay and Android Auto Features

The module supports both wireless and wired CarPlay and Android Auto, allowing you to access navigation, music, phone calls, and other apps on your car's screen.

Demonstration of Wireless/Wired Android Auto interface showing Map, Music, and Phone Call functions.

Figure 19: Wireless/Wired Android Auto interface.

Demonstration of Wireless/Wired CarPlay interface showing Map, Music, and Phone Call functions.

Figure 20: Wireless/Wired CarPlay interface.

5.4.1 Navigation & Maps

Support for various mainstream map applications allows for easy navigation.

Screenshot of a navigation app running on the car's display, showing map and voice command options.

Figure 21: Navigation and map features.

5.4.2 Mobile Music Play

Access and play music from various streaming services and apps.

Screenshot of a music player app on the car's display, showing playback controls and music library.

Figure 22: Mobile music playback.

5.4.3 Hands-Free Phone Call

Make and receive calls directly from your car's display, ensuring safe communication while driving.

Screenshot of a phone call interface on the car's display, showing contact information and call controls.

Figure 23: Hands-free phone call interface.

The module supports wireless/wired AirPlay for iOS devices and wired AutoLink for Android devices, allowing you to cast your phone's screen to the car display.

Image illustrating AirPlay and AutoLink functionality, showing a phone screen mirrored to the car's display.

Figure 24: AirPlay / AutoLink functionality.

5.5 Camera Function

The module supports various camera inputs, enhancing safety and convenience.

  • Support factory original reverse camera parking radar.
  • Support aftermarket reverse camera and 360 camera.
  • Support front view camera DVR (CVBS input).
Diagram showing support for front camera, rear camera, and original car camera views.

Figure 25: Camera function support.

5.5.1 Original Camera Setting

To use your original OEM rear view camera, navigate to the decoder's main menu, select "Setting", then "Reverse", and set the reverse camera to "Original". Ensure "Reverse line detect", "Reverse display track", and "Reverse display radar" are set to "off".

Screenshot of the camera settings menu, showing options for 'Reverse Camera' set to 'Original' and other settings turned off.

Figure 26: Original camera settings.

5.5.2 Aftermarket Camera Connection and Setting

For aftermarket reverse and front cameras, connect them as shown in the diagrams below. After connection, set the reverse camera to "Aftermarket" in the settings menu. For the front view camera, set the front view time between 1 to 15 seconds.

Wiring diagram for aftermarket reverse camera connection, showing video in, GND 12V-, 12V reverse camera, and reverse lamp 12V+ connections.

Figure 27: Aftermarket reverse camera cable connection.

Wiring diagram for aftermarket front camera connection, showing front camera, GND 12V-, and 12V+ connections.

Figure 28: Aftermarket front camera cable connection.

Screenshot of the camera settings menu, showing options for 'Reverse Camera' set to 'Aftermarket' and other settings turned off.

Figure 29: Aftermarket camera settings.

5.6 Voice Control (Siri & Google Assistant)

With Siri on CarPlay and Google Assistant on Android Auto, you can use voice commands for navigation, music playback, and other functions, keeping your hands on the steering wheel and eyes on the road.

Screenshot of Siri/Google Assistant interface on the car's display, showing voice command prompts.

Figure 30: Siri & Google Voice Control interface.

To activate Siri or Google Assistant:

  1. Use the voice control button on your steering wheel.
  2. Long-press the confirm button on your iDrive controller.
Images showing the voice control button on the steering wheel and the iDrive confirm button for Siri activation.

Figure 31: Activating voice control.

6. Maintenance

The Road Top CarPlay module is designed for durability and requires minimal maintenance. Keep the unit free from dust and moisture. Avoid exposing it to extreme temperatures. Do not attempt to open or repair the unit yourself, as this will void the warranty.

7. Troubleshooting (FAQ)

7.1 Display Issues

Red screen, black screen, half-screen, or flash screen

These issues often indicate incorrect toggle switch setup or iDrive CAN cable connection. Please:

  • Verify the toggle switch settings according to your car's screen size (refer to Section 4.1).
  • Check the iDrive CAN cable connections (refer to Section 4.3.3).
  • If problems persist, contact customer support with your current toggle switch setup code and iDrive CAN cable connection details.
Images showing examples of red screen, black screen, half-screen, and flash screen issues.

Figure 32: Examples of display issues.

7.2 Sound Issues

No sound during calls

Disconnect the Bluetooth connection between your phone and your car, then reconnect.

Echo sound during calls

In the Audio settings, set the "Mic Echo PreConfig" to "5i", then restart the engine.

7.3 Steering Wheel Control Buttons Not Working

If the steering wheel control buttons (voice control, Tel button, volume "+" and "-" buttons) are not working, you need to set "Enable Wheel Key" to "On" in the system settings.

Screenshot of system settings showing 'Enable Wheel Key' option set to ON.

Figure 33: Enable Wheel Key setting.

8. Specifications

FeatureSpecification
Brand NameRoad Top
Operating SystemLinux
Voltage12 V
Item Weight1.5kg
Item Size150*100*23 mm
Max External Memory128G
Display Size2.5" (Interface output to OEM screen)
DinOne Din
InterfaceOriginal
Special FeaturesWiFi function, Support steering wheel control, Support 3G/4G Network, Support Can-Bus, Built-in GPS, Mobile Phone, MP3 players, Voice Control, CarPlay, Android Auto, Reversing Input
Digital Media FormatDVD-R/RW, DVD-RAM, VIDEO CD, Mp3, MP4, WMA
OSD LanguageChinese (Simplified), Chinese (Traditional), Polish, German, Russian, French, Korean, Dutch, Portuguese, Turkish, Spanish, Italian, English
CertificationCE
Built-in DVD PlayerNo
Built-in CD playerNo
Is touch screenNo (Uses original car screen)
Built-in ScreenNo (Uses original car screen)
TF/Micro SD Slot0

9. User Tips

  • Right-Hand Drive Compatibility: The module is generally compatible with both left-hand and right-hand drive vehicles. The core functionality remains the same, but some menu layouts or physical button orientations might differ slightly from left-hand drive examples.
  • Optimal Mic Placement: If using the aftermarket mic, ensure it is positioned as close to the driver as possible for clear voice commands and calls.
  • WiFi Signal Strength: Avoid placing the WiFi antenna near metal objects to maintain a strong and stable wireless connection for CarPlay/Android Auto.

10. Warranty and Support

10.1 Warranty

This product comes with a one-year warranty.

10.2 Technical Support

If you encounter any issues or have questions regarding your Road Top CarPlay module, please contact us. When seeking support, please provide the following information:

  • Your order ID
  • Car model and year
  • Car screen size
  • Current toggle switch setup
  • Pictures of your LVDS cable connections
  • Software version (found in CarPlay decoder menu: Setting > System Version)
Screenshot of the System Version information within the CarPlay module settings.

Figure 34: Locating System Version information.

You can also refer to the official user manual PDF for additional details: View User Manual (PDF)

© 2023 Road Top. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.