HYUNDAI Grand I10 92201B4010

Contents

User Manual: HYUNDAI Grand I10 Front Bumper Fog Light

Model: 92201B4010 | Years: 2014-2015

1. Important Safety Information & General Guidelines

Fog lights are designed as safety warning tools for low visibility conditions, not for general daily lighting. They possess strong light penetration and should only be activated during foggy conditions. Misuse is strictly prohibited.

Prohibited Usage:

  • Clear Weather, Good Visibility: Never use fog lights, especially rear fog lights, on clear nights in the city. The intense red light can cause glare and dizziness for drivers behind, increasing the risk of rear-end collisions.
  • Following Another Vehicle: Avoid using fog lights when closely following another vehicle without fog, as the light can reflect and obscure the rearview mirror of the car in front.

2. Product Compatibility

This front bumper fog light assembly is specifically designed for the HYUNDAI Grand I10 models from 2014 to 2015. Please ensure your vehicle matches the specified model and year before installation.

Note: Always verify compatibility with your specific vehicle model to avoid inconvenience. If unsure, consult with the seller or a professional.

Blue Hyundai Grand i10 with fog lights illuminated, showing product application.
Fig 2.1: Application on HYUNDAI Grand I10 2014-2015.
Comparison of blue Hyundai Grand i10 (FOR) and orange Hyundai Grand i10 (NOT FIT) models.
Fig 2.2: Visual guide for compatible and incompatible Grand I10 models.
Comparison of two fog light designs, indicating 'This model' for proper fitment.
Fig 2.3: Ensure your fog light matches 'This model' for correct fitment.

3. Installation Guide

Installation of automotive lighting components can be complex and may require specialized tools and knowledge. Professional installation by a qualified mechanic is highly recommended.

General Access for Installation/Replacement:

To access the fog light assembly, you may need to:

  • Remove the lamp cover.
  • Access from under the vehicle.
  • Access from behind the bumper.

Always refer to your vehicle's specific service manual for detailed instructions on bumper removal and fog light installation.

Front-side view of a single fog light assembly.
Fig 3.1: Front-side view of the fog light assembly.
Top-down view of the fog light assembly, showing the lens and mounting points.
Fig 3.2: Top-down view showing mounting points.

4. Operation Guidelines

Adhere to the following regulations for the proper use of fog lights:

Visibility Condition Required Lighting Speed & Distance
Less than 200 meters Fog lights, low beam headlights, outline lights Speed ≤ 60 km/h, distance between vehicles > 100 meters
Less than 100 meters Fog lights, low beam headlights, outline lights, hazard warning lights Speed ≤ 40 km/h, distance between vehicles > 50 meters
Less than 50 meters All above lights (fog, low beam, outline, hazard) Speed ≤ 20 km/h, leave expressway as soon as possible

5. Maintenance

Bulb Replacement (Halogen Type Only):

Note: For LED integrated types, the entire assembly must be replaced.

  1. Turn off the engine and disconnect the power supply. If necessary, disconnect the negative terminal of the battery.
  2. Remove the lamp cover or access the bulb from under the vehicle or behind the bumper.
  3. Turn the old bulb counterclockwise to remove it.
  4. Caution: Do not touch the glass shell of the new bulb with bare hands. Oils from your skin can cause the bulb to shatter at high temperatures.
  5. Align the new bulb with the slot and tighten it clockwise.
  6. Reinstall any removed covers or components and test the light.

Lampshade Cleaning:

  • Clean the lampshade with a flannel cloth dipped in alcohol.
  • Do not dry wipe to avoid scratches on the surface.
Rear view of the fog light assembly showing the bulb housing and 'B61 12V 27W' marking.
Fig 5.1: Rear view of the fog light assembly, indicating bulb type and wattage.

6. Troubleshooting

Dimming / Not Lighting Up:

  • Bulb Lifespan: If the bulb appears red, dim, or flickers, it may be nearing the end of its lifespan and requires replacement.
  • Circuit/Fuse: Check the corresponding fuse in your vehicle's fuse box. Refer to your vehicle's user manual for the correct fuse number and location. Replace any blown fuses.

7. Specifications

Feature Detail
Item Type Fog Lamp Assembly
Compatibility HYUNDAI Grand I10 (2014-2015)
Model Number 92201B4010
Bulb Type Halogen (B61 12V 27W) or LED Integrated (assembly replacement)
Origin Mainland China
High-concerned chemical None

Package Dimensions:

  • Length: 38 cm
  • Width: 20 cm
  • Height: 23 cm
  • Weight: 1.1 kg

8. User Tips

  • Always double-check the fog light's alignment after installation to ensure optimal beam pattern and avoid dazzling oncoming traffic.
  • Regularly inspect your fog lights for dirt or damage, especially after driving in adverse weather conditions, to maintain maximum visibility.
  • Consider carrying spare fuses for your vehicle's lighting system, as a blown fuse is a common cause of non-functional lights.

9. Warranty and Support

For any questions regarding installation, operation, or warranty claims, please contact the seller directly. Keep your purchase records for reference.

A detailed user manual in PDF format may be available for download. Please refer to the product page or contact customer service for access to the official PDF document: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.