SAGE LU MEI E1-TS, E1-TS(D), E1-TS(L)

Contents

Skydance Dimmable Touch/Hand Sweep Sensor Switch User Manual

Models: E1-TS, E1-TS(D), E1-TS(L)

Brand: SAGE LU MEI

1. Product Overview

The Skydance Dimmable Touch/Hand Sweep Sensor Switch is designed for controlling low voltage LED strips (5-24VDC). It features both touch and hand sweep sensing capabilities, allowing for convenient light control through non-metallic materials such as wood, acrylic, plastic, and glass. Its ultra-thin design allows for hidden, random paste installation without the need for drilling.

Key Features:

  • Versatile Sensing: Detects touch or hand sweep movement through non-metallic surfaces (wood, acrylic, plastic, glass).
  • Dimmable Control: Short press to turn on/off, long press to adjust brightness (5-100%).
  • Hand Sweep Function: Sweep once to turn on, sweep again to turn off. Dimmable or non-dimmable modes available.
  • Fade Effects: 1-second light-on fade, 2-second light-off fade.
  • Adjustable Sensing Distance: Two levels (0-1cm for open, 3-4cm for concealed).
  • Adjustable PWM Frequency: Three levels (500Hz, 2KHz default, 4KHz).
  • Memory Function: Automatically restores previous settings after power failure.
  • Easy Installation: Ultra-thin design, no drilling required, uses 3M adhesive for paste-anywhere installation.
  • Wide Application: Ideal for cabinets, closets, wine cabinets, and showcases.
Skydance Sensor Switch Variants

Image: Overview of Skydance E1-TS, E1-TS(D), and E1-TS(L) sensor switch variants, illustrating touch and hand sweep icons.

No Need Punch Hole Feature

Image: Illustration of the 'No Need Punch Hole' feature, showing direct penetration sensing through wood, glass, and acrylic surfaces.

2. Specifications

ParameterValueParameterValue
Input Voltage5-24VDCOperation Temperature-20°C ~ +55°C
Output Voltage5-24VDCProtectionReverse polarity
Output Current4ASafety StandardEN 61347-1/-2, EN 62493
Output Power20-96WEMC StandardEN IEC 55015/EN IEC 61547/EN IEC 61000-3
PWM Frequency500Hz/2KHz(default)/4KHzCertificationCE, RoHS
MaterialABSPackage Size90x130mm
Item TypeDimmersGross Weight0.030kg
Warranty5 yearsModel NumbersE1-TS, E1-TS(D), E1-TS(L)
Technical Parameters and Mechanical Structures

Image: Detailed technical parameters and mechanical structure diagram for E1-TS(L) sensor switch.

3. Setup and Installation

3.1 Wiring Diagram

Ensure the power supply is disconnected before wiring. Connect the sensor switch to a compatible 5-24VDC power adapter and a single-color LED strip as shown in the diagrams below.

Wiring Diagram for E1-TS(D) and E1-TS(L)

Image: Wiring diagram for E1-TS(D) and E1-TS(L) models. E1-TS(D) uses DC female input and DC male output. E1-TS(L) uses Dupont male jack in and Dupont female jack out. Both connect to a 5-24VDC power adapter and a single color LED strip.

3.2 Physical Installation

The sensor switch can be installed in either an open or concealed manner. Use the provided 3M adhesive to attach the sensor switch to the back of the desired non-metallic surface (wood, acrylic, plastic, glass). For concealed installations, the material thickness should not exceed 25mm.

Open Installation:

Attach the sensor switch to the back of the board using 3M adhesive. Affix the indicator sticker to the corresponding position on the front of the board.

Touch Switch Open Installation

Image: Illustration of open installation for the touch switch, showing the sensor attached to the back of a surface and the indicator sticker on the front.

Concealed Installation:

Attach the sensor switch to the back of the board using 3M adhesive. Apply the indicator sticker to the corresponding position on the front of the board. Ensure the partition thickness is ≤ 25mm.

Hand Sweep Switch Concealed Installation

Image: Illustration of concealed installation for the hand sweep switch, showing the sensor hidden behind a surface with a thickness of ≤ 25mm.

3.3 Installation Precautions:

  • Use 3M adhesive to install the sensor switch on the back of non-metallic materials such as wood, plastic, glass, acrylic, etc.
  • The sensor switch is not affected by ambient temperature, humidity, or light, and has strong anti-interference capability.
  • When installing, place the sensing side up.
  • Concealed detection thickness must be ≤ 25mm.

4. Operating Instructions

4.1 Basic Operation:

  • Touch Switch:
    • Short press to turn on the light. Short press again to turn off the light.
    • Long press for 2-7 seconds to adjust the brightness of the light (5-100%).
    • Long press again, the brightness changes in the opposite direction.
  • Hand Sweep Switch:
    • Sweep your hand once to turn on the light. Sweep again to turn off the light.
    • When your hand stays within the detection distance for 2-7 seconds, the brightness of the light (5-100%) will adjust.
    • The brightness changes in the opposite direction when the hand moves away and stays again.
Stepless Dimming Illustration

Image: Illustration of long press stepless dimming from 10% to 100% brightness.

4.2 Sensor Switch Head Function Settings:

The sensor switch head has a 'Set key' and an 'LED indicator' for configuration.

Sensor Switch Head Function Diagram

Image: Diagram illustrating the 'Set key' and 'LED indicator' on the sensor face, along with instructions for setting sensing distance, PWM frequency, dimmable mode, memory function, and factory reset.

  • Set the Sensing Distance:
    • Short press the set key to switch between 2 levels of sensing distance:
    • LED indicator blinks 1 time: Sensing distance set to 0-1cm (for open mounted touch sensing).
    • LED indicator blinks 2 times: Sensing distance set to 3-4cm (for concealed touch sensing, open mounted hand-sweep sensing, and concealed hand-sweep sensing).
  • Set the PWM Frequency:
    • Long press the set key for 5-15 seconds to set 3 kinds of PWM frequency:
    • Long press for 5s (LED blinks 3 times): PWM frequency set to 500Hz.
    • Long press for 10s (LED blinks 4 times): PWM frequency set to 2KHz.
    • Long press for 15s (LED blinks 5 times): PWM frequency set to 4KHz.
  • Set Dimmable or Non-Dimmable Mode:
    • Long press the set key while the sensor switch is powered on (LED indicator light off):
    • Long press for 5s (LED blinks 2 times): Set to dimmable mode.
    • Long press for 10s (LED blinks 4 times): Set to non-dimmable mode.
  • Memory Function:
    • After power failure and turn on again, the device automatically restores the setting parameters before power failure.
  • Restore Factory Default Settings:
    • Long press the set key for 20 seconds (LED indicator blinks 6 times).
    • Factory default parameters: 3-4cm sensing distance, 2KHz PWM frequency, dimmable.

5. Troubleshooting and Notes

Important Notes:

  • Always set the sensing distance, PWM frequency, and dimming capability according to the actual installation requirements and the equipped pin.
  • If set to non-dimmable, the light can only be turned on or off; brightness cannot be adjusted.
  • If set to dimmable, brightness can be adjusted.
  • When turning on the light, the LED indicator is brighter; when turning off the light, the LED indicator is darker. During brightness adjustment, the LED indicator flashes continuously.
  • Each time the sensor switch is powered on, the LED indicator flashes a number of times corresponding to the current sensing distance setting value.

Common Issues:

  • Light not turning on/off: Check power connections and ensure the sensor is correctly installed. Verify sensing distance settings.
  • Brightness not adjusting: Ensure the switch is set to dimmable mode. If in non-dimmable mode, brightness adjustment is not possible.
  • Inconsistent sensing: Check for obstructions or ensure the sensing surface thickness is within the ≤ 25mm limit for concealed installation. Re-calibrate sensing distance if necessary.

6. Maintenance

The Skydance sensor switch is designed for durability and requires minimal maintenance. Keep the sensor surface clean and free from dust or debris to ensure optimal performance. Avoid using harsh chemicals for cleaning. No user-serviceable parts are inside.

7. User Tips

No specific user tips are available from provided reviews or Q&A content at this time.

8. Warranty and Support

This product comes with a 5-year warranty from the date of purchase, covering manufacturing defects. For technical support or warranty claims, please contact your retailer or the manufacturer directly.

An official user manual in PDF format can be viewed here.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.