1. Introduction
The elough X01 USB C Fast Charge Safety Separator is an intelligent device designed to protect your electronic devices from overcharging. It features an AI-powered auto-disconnect mechanism that physically detaches your device once it reaches full charge, preserving battery health and extending its lifespan. Supporting up to 140W fast charging, it is compatible with a wide range of USB-C enabled devices.
Figure 1: elough X01 USB C Fast Charge Safety Separator
2. Safety Warnings and Precautions
- Do not use the product if it has come into contact with water or any other liquid.
- Ensure the charging environment is dry and well-ventilated.
- When using the separator with a wall charger, ensure the charger is plugged into a stable outlet (e.g., a desk-level power strip) to prevent the separator from falling after physical disconnection.
- Keep out of reach of children.
- Avoid disassembling or modifying the device, as this may void the warranty and pose safety risks.
3. Package Contents
Please check the package for the following items:
- 1 x elough X01 USB C Fast Charge Safety Separator
- 1 x User Manual (this document)
4. Specifications
| Feature | Specification |
|---|---|
| Product Model | X01 |
| Input/Output Interface | Type C |
| Voltage Range | DC 5V-28V |
| Current Range | 0A-5A |
| Max. Output Power | 140W |
| Applied Fast Charge Protocols | Qualcomm Quick Charge |
| Intelligent Charge | Yes |
| Display Screen | No |
| GaN | No |
| Material | Fire-resistant PC |
| Dimensions | 45mm x 68mm x 22mm |
| Weight | 25g |
| Certification | CE |
| Origin | Mainland China |
5. Setup and Connection
The elough X01 offers two primary connection methods:
-
Direct Connection to Device:
Plug the Type-C connector of the separator directly into your device's charging port. Then, connect your charging cable to the separator's input port. The separator will automatically detach from your device once it's fully charged.
Figure 2: Direct connection to a device
-
Between Charger and Cable:
Plug the separator's Type-C connector into your wall charger's output port. Then, connect your charging cable to the separator's input port and the other end of the cable to your device. The separator will automatically detach from the wall charger once your device is fully charged.
Figure 3: Connection between charger and cable
The separator features memory foam pads to protect your device from scratches during connection and disconnection.
Figure 4: Memory Foam Pads
6. Operating Modes
The elough X01 has two operating modes, selectable by a single click of the button on the device:
-
Blue Light Mode (High Power Charging):
This is the default mode. The indicator light will be blue. In this mode, the separator is suitable for devices with screens that remain on standby, such as smartphones, tablets, and laptops. The physical disconnection will occur approximately 10-50 minutes after your device displays 100% charge, allowing for trickle charging to fully saturate the battery.
-
Green Light Mode (Low Power Charging):
Click the button once to switch to this mode. The indicator light will be green. This mode is suitable for screen-free electronic devices like Bluetooth earphones, power banks, shavers, beauty devices, and children's toys. Physical disconnection will occur approximately 5 minutes after the device is fully charged.
-
Red Light (Physical Disconnect):
The indicator light will flash red when the physical power cut-off occurs.
Video: Demonstration of the auto-disconnect feature and different charging modes.
7. Maintenance
- Clean the separator regularly with a soft, dry cloth.
- Avoid using harsh chemicals or abrasive materials for cleaning.
- Store the device in a cool, dry place when not in use.
- Ensure the Type-C connectors are free from dust and debris to maintain optimal performance.
8. Troubleshooting
- Q: The separator does not disconnect when my device shows 100% charge.
- A: For devices with screens (phones, tablets, laptops), the separator allows for an additional 10-50 minutes of trickle charging after 100% is displayed to ensure a full battery. If your device was already above 99% charged when connected, the auto-disconnect feature might not trigger. Ensure the device is sufficiently discharged before connecting for optimal auto-disconnect functionality.
- Q: The separator's push rod seems stuck or doesn't retract properly.
- A: Ensure there is no obstruction around the push rod. If the issue persists, try disconnecting and reconnecting the device. If the problem continues, contact customer support.
- Q: The separator is not charging my device.
- A: Check all connections (charger, separator, cable, device) to ensure they are secure. Verify that your charger and cable are functioning correctly. Ensure the separator is not damaged.
9. User Tips
- This gadget is highly recommended for users who frequently leave their devices charging overnight, as it effectively prevents overcharging and extends battery life.
- While there is a slight delay (10-50 minutes) for the separator to physically disconnect after reaching 100% charge, this is a beneficial feature that allows for optimal trickle charging, ensuring your battery is truly full without being overcharged.
- The compact size of the X01 makes it convenient for travel and everyday use.
- The separator's compatibility extends beyond just phones and tablets; it also works perfectly with devices like PS5 controllers, earphones, and power banks.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the official elough website or contact your retailer.
A comprehensive user manual in PDF format is available for download: elough X01 User Manual (PDF).