1. Introduction
This manual provides essential information for the safe and effective operation of your GIEC BDP-G5300 True 4K Ultra HD Blu-Ray Player. Please read it thoroughly before using the device and keep it for future reference.
The GIEC BDP-G5300 is a versatile media player designed to deliver a stunning visual and audio experience. It supports True 4K Ultra HD Blu-Ray playback, including HDR10+ and Dolby Vision, and is compatible with a wide range of disc and digital media formats. Featuring an MTK 8581 upgrade chip, it ensures 100% 4K decoding and broad format compatibility.
2. Safety Notices and Important Information
2.1. Warning
- To avoid fire and electric shock, do not expose the device to rain or moisture.
- To avoid electric shock, do not open the shell; only qualified personnel should perform repairs.
- Replace the AC power line only at a special maintenance center.
- Prevent the battery or the device installed with battery from overheating, such as from sunlight, fire, or similar heat sources.
2.2. Caution
- The chemical apparatus in the player is harmful to eyes. Do not open the shell because the laser beam of the Blu-ray Disc™/DVD player is harmful to eyes.
- Only qualified personnel should repair the player.
- This device is classified as a Category I laser product. The sign is printed on the back of the player.
2.3. General Notices
- The player operates at AC 100V-240V, 50Hz/60Hz. Verify that your local power supply complies with the operating voltage.
- Keep the player away from water and moisture. Do not place any containers with liquid (e.g., vases) on the player.
- Install the player properly and ensure that the AC power line can be pulled out from the outlet immediately in case of failure.
- Do not repair the player without authorization; doing so will void the warranty and may cause electric shock.
2.4. Placement
- Place the player in a well-ventilated area to prevent heat accumulation.
- Avoid placing the player on soft surfaces (e.g., carpet) that may block vents.
- Do not install the player in narrow spaces (e.g., bookshelves).
- Keep the player away from direct sunlight, heat sources, excessive dust, or mechanical impact.
- Do not place the player outdoors, in a vehicle, or on a boat.
- If the player is moved from a cold to a warm place, or placed in a moist room, moisture may condense on the lens. If this occurs, remove the disc, connect power, and let it sit for half an hour until the moisture vaporizes.
- The player should be installed horizontally, not inclined.
- Maintain at least 20cm distance from your body (excluding hands, wrists, feet, and ankles) during operation.
- Do not place heavy or unstable objects on the player.
- Do not place any object other than discs on the disc tray to prevent damage.
- When moving the player, remove all discs and pull out the AC power line and other cables.
2.5. Power Supply
- The AC power supply remains connected as long as the power line is plugged into the wall outlet, even if the player is turned off.
- If the player will not be used for a long time, unplug the power line from the wall outlet.
- Always hold the plug, not the power line, when unplugging.
- Do not use a damaged power line to avoid electric shock or fire.
- Do not clip the AC power line between the player and a wall or bookshelf.
- Do not place heavy objects on the AC power line or pull it forcefully.
2.6. Adjusting Volume
When playing material with low input level or no audio signal, do not turn up the volume excessively to avoid hearing damage or speaker damage.
2.7. Cleaning
- Wipe the shell, panel, and controller with a soft cloth. Do not use sandpaper, polishing powder, or solutions (e.g., alcohol, gasoline).
- Do not use cleaning discs or disc/lens cleansers (including wet or spray) as they may damage the device.
2.8. HDMI OUT Port Connection
- Improper operation may damage the HDMI out port and the connection.
- Check the shape of the port and connector, then align and connect the HDMI cable to the HDMI port on the rear of the player. Ensure the connector is not upside-down or inclined.
- When moving the player, pull out the HDMI cable.
- When connecting or pulling out the HDMI cable, hold the HDMI connector uprightly. Do not twist or insert the HDMI connector into the HDMI out port by force.
2.9. Important Note on Display
Leaving a still video image or OSD image on the TV screen for an extended period may permanently damage the TV screen, especially Plasma and projection TVs.
2.10. Toxic and Hazardous Substances or Elements
The product contains the following substances:
| Part Name | Lead (Pb) | Mercury (Hg) | Cadmium (Cd) | Hexavalent Chromium (Cr(VI)) | Polybrominated Biphenyls (PBB) | Polybrominated Diphenyl Ethers (PBDE) |
|---|---|---|---|---|---|---|
| Mounting base | X | O | O | O | O | O |
| Shell | X | O | O | O | O | O |
| Optical unit | X | O | O | O | O | O |
| Drive unit | X | O | O | O | O | O |
| Accessories (cable, mouse, remote control, etc.) | X | O | O | O | O | O |
O: Indicates that the content of toxic and hazardous substances and elements in this part is below the limit regulated in SJ/T11363-2006.
X: Indicates that the content of toxic and hazardous substances and elements in certain homogeneous material of this part exceeds the limit regulated in SJ/T11363-2006.
3. Package Contents
Ensure all items are present in the package:
- GIEC BDP-G5300 Blu-Ray Player
- Remote Control
- HDMI Cable
- User's Manual (this document)
4. Product Overview
4.1. Front Panel Description
The front panel features essential controls and indicators:
- Disc tray: For inserting and ejecting discs.
- Remote receiver: Receives signals from the remote control.
- USB interface: Connect USB devices for media playback or software updates.
- Eject/Insert button: Opens and closes the disc tray.
- Play/Pause button: Starts or pauses playback.
- ON/Standby button: Turns the player on or sets it to standby mode.
4.2. Rear Panel Description
The rear panel provides various connection ports:
- 1. LAN Port: For network connection.
- 2. HDMI 2.0 Output: Main HDMI output for audio and video.
- 3. HDMI 1.4 Output: Secondary HDMI output, typically for audio only or older devices.
- 4. USB 3.0 Input: High-speed USB port.
- 5. Coaxial Output: Digital audio output.
- 6. Optical Output: Digital audio output.
- 7. AV Output: Analog audio/video output.
5. Remote Control
5.1. Installing the Battery
- Open the battery cover on the back of the remote control.
- Insert two R03 (AAA) batteries, ensuring the +/- polarity matches the signs in the slot.
- Close the battery cover.
5.2. Using the Remote Control
Aim the remote control at the receiver on the front panel of the player to operate. The effective range is approximately 7 meters from the front end of the remote control, within a 30-degree angle.
5.3. Remote Control Button Functions (While Playing)
| Button | Function |
|---|---|
| Power | On/Standby. |
| RED/Program | Program playing desired tracks. Mark the disc being played, press it to set bookmark, or press and hold it to pop up the bookmark list. |
| Green (mark) | Switch the output resolution. |
| HDMI | Switch the output resolution. |
| Picture in picture | Turn the sub screen on/off. |
| 0-9 Number keys | Number input. |
| Homepage | Go to the home page. |
| Direction keys | Navigation. |
| Option | Access more options while playing. |
| Info | Display the information while playing. |
| Search | Select search time, chapter, etc. Press Search, then Left/Right to select time or chapter, then OK. Use Up/Down to enter numbers directly. |
| Title Popup | Enter or exit disc menu. |
| Audio | Select audio language or channel. |
| Clear | Clear error. |
| Random | Shuffle Playback. |
| Mute | Mute or cancel mute. |
| Stop | Stop playing. |
| Fast rewind | Fast rewind by 1x, 2x, 3x, 4x, 5x. |
| Fast forward | Fast forward by 1x, 2x, 3x, 4x, 5x. |
| Eject/Insert | Eject/insert the disc tray. |
| Blue | Has a blue button function. |
| Yellow/Zoom | Zooming image. |
| Angle | Select the shooting angle to play. |
| Picture-in-picture language | Select the picture-in-picture language. |
| Setup | Go to the settings interface. |
| OK | Confirm. |
| Return | Return to previous menu. |
| Disc menu | Access the main menu of the video disc. |
| Vol+ | Turn up the volume. |
| Vol- | Turn down the volume. |
| Subtitle | Select subtitle language. |
| A-B | While playing, press once to select the starting point, press again to select the ending point and repeat playing the selected segment. |
| Repeat | Repeat playing title, chapter, track or disc. |
| Pause | Press this button during playback to enter the pause state. Press once to pause playback and press to resume normal playback a second time. |
| Prev. | Go to previous chapter/track, or chapter start of DVD. |
| Next | Go to next chapter/track. |
5.4. Remote Control Operation Notices
- Do not expose the remote control to strong light, as it may malfunction.
- Avoid dropping or impacting the remote control to prevent damage.
- Keep the remote control away from high temperatures or moisture to prevent component oxidation and metal part rust.
- Do not disassemble the remote control; seek qualified personnel for maintenance.
- If the remote control becomes less sensitive or its effective range reduces, replace the batteries. Do not mix new and old batteries.
- Check for battery liquid leakage regularly. If leakage occurs, clean the battery slot before replacing new batteries to prevent metal splicing erosion and rust.
6. Setup and Connections
6.1. Connecting to a TV (HDMI Audio/Video Output)
Use an HDMI cable to connect the HDMI 2.0 Output port on the player to an HDMI input port on your TV. This connection transmits both audio and video signals.
6.2. Connecting to an Amplifier (HDMI Audio Output)
If you are using an external amplifier for audio, connect the HDMI 1.4 Output port on the player to an HDMI input port on your amplifier using an HDMI cable.
6.3. Connecting to a Network
To access network features and BD-Live content, connect the LAN Port on the player to your broadband router/modem using an Ethernet network cable.
6.4. Connecting USB Devices
The USB 3.0 Input port allows you to connect USB devices for additional memory, software updates, BD-Live reward content, and media playback.
Note: When a disc is playing, do not insert a hard disk or USB device to read content. This may cause a crash. If you want to play content from a hard disk or USB device, first remove any disc from the player, then plug in the hard disk or USB device.
6.5. Coaxial and Fiber Optic Connections
- Connect a coaxial cable (not supplied) from the Coaxial Output port on the player to the coaxial/digital input on your audio device.
- Connect a fiber optic cable (not supplied) from the Optical Output port on the player to the fiber/digital input on your audio device.
6.6. Analog Audio Connection
For analog audio output, connect the AV Output (Stereo Analog Audio Output) ports on the player to the corresponding analog audio inputs (L/R) on your audio system using RCA cables.
7. Operating Instructions
7.1. Using Discs
7.1.1. Holding the Disc
- Do not touch the playing side of the disc.
- Do not paste paper or adhesive tape on the playing side of the disc.
7.1.2. Cleaning the Disc
Fingerprints and dirt on the disc surface can affect audio and video quality. Use a soft cloth to wipe the disc from the center outwards. If dirt cannot be removed with a soft cloth, use a wet cloth followed by a dry cloth. Do not use solvents like thinner, gasoline, or detergents, as they may damage the disc.
7.1.3. Disc Storage
- Do not place discs in direct sunlight or near heat sources.
- Do not store discs vertically without proper support, as they may bend.
Prompt: If the player will not be used for a long time, insert a disc into the machine to avoid affecting the performance of the laser head.
7.2. Playback Features
- Multiple Disc Types: Supports BD, BD-R, BD-RE, DVD, DVD-R/RW, DVD+R/RW, DVD VIDEOVCD, CD, CD-R/RW, etc.
- Multiple Video Formats: Supports MPEG-1, MPEG-2, MPEG4, VC1, H.264, MOV, MKV, AVI, TS, etc.
- Multiple Audio Formats: Supports AAC, APE, CUE, FLAC, OGG, MP3, WAV, etc.
7.2.1. 4K Ultra HD and Dolby Vision
Experience outstanding 4K image quality with support for Dolby Vision and HDR10+, delivering richer and more delicate colors (10-bit for 1.07 billion colors compared to 8-bit for 16.67 million colors).
7.2.2. 3D Blu Ray Playback
The player supports 3D Blu Ray discs, offering a realistic stereoscopic effect for an immersive viewing experience.
7.2.3. Audio Decoding
The player supports Dolby DTS Decoding, Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Atmos/X-DMAX, and DTS:X DTS-CD/DTS-HD, providing HiFi level sound effects.
It is also compatible with playing SACD DSD and other professional audio formats.
7.2.4. ISO File Playback
The player supports original, lossless playback of ISO files.
7.2.5. Blu Ray Navigation and Subtitles
The player offers Blu Ray navigation with movie poster display and supports external subtitles imported via the USB interface.
7.2.6. Blu Ray Full Area Playback
Blu-ray discs have no restricted area, allowing for full area playback.
8. Technical Specifications
Note: Specifications are subject to change without prior notice.
8.1. Area Code
The player supports the following area code:
| DVD | Blu-ray | Country/Region |
|---|---|---|
| 6 | C | CHINA |
8.2. Compatible Media
- BD-Video: Yes
- DVD-Video: DVD+R/+RW, DVD-R/-RW, DVD+R/-R DL (double-layer)
- VCD: Yes
- Audio CD: CD, CD-R/-CD-RW, MP3, JPEG
- MKV: Yes
- USB device: Yes
8.3. Video
- Signal system: PAL/NTSC
- Composite video output: 1 Vp-p (75Ω)
- HDMI output: 480p, 576p, 720p, 1080i, 1080p, 4K2K
8.4. Audio
- Digital output: 0.5 Vp-p (75Ω)
- Coaxial cable: Yes
- HDMI output: Yes
- Sampling frequency (MP3): 32KHz, 44.1KHz, 48KHz
- Fixed bit rate (MP3): 112kbps-320kbps
8.5. USB
- Compatibility: High speed USB (3.0)
- Category support: USB mass storage
- File system: FAT16, FAT32, NTFS
- Support HDD (portable hard disk): May require external power supply.
8.6. Master Device
- Rated power: AC 100V-240V, 50Hz-60Hz
- Power consumption: 25W
- Size (W*H*T): 360×49×224mm
- Net weight: 1.9kg
9. Troubleshooting
If you encounter any issues, please refer to the table below. If problems persist or you are unsure about the instructions, contact your local distributor.
Warning: Do not attempt to repair the player without authorization, as this will void the warranty and may cause electric shock.
| Failure | Reason and Solution |
|---|---|
| No power supply | Please ensure the AC outlet has electricity. Insert the AC power line firmly. Press the Power key on the front panel to turn on the player. |
| Image is frozen and operation is invalid | Cut off the power supply and connect again, then press the Power key on the remote control to restart the player. |
| Auto standby | The default setting: in stopped state, if no operation for 3 minutes, screen saver activates; if no operation for 6 minutes in screen saver, player enters standby. Press Power key on remote to restart, or select "OFF" in "Main menu > General > System > Screen saver". |
| Remote control can't work normally | The remote control isn't aimed at the receiver. Aim at the receiver on the front panel. There is an obstacle between the remote control and the player. Remove it. Battery is too low. Replace with new batteries. Refer to "Using remote control" instruction. |
| Can't play discs | Ensure the disc label is upwards. If the disc is dirty, clean it. The disc is empty or cannot be played. Check if the disc area code matches the player. |
| Red key appears on the screen | Selected function or operation is unavailable in current state. Reasons: 1. Software function limit of certain BD/DVD discs. 2. Certain BD/DVD discs don't support selected function. 3. The selected function is invalid in current mode. |
| Playing mode is different from the setting | For certain discs, the settings in the menu are invalid. Operate according to the disc menu. |
| No HDMI output | Check if the HDMI connection between the player and external device is loose, and insert properly. Check if your TV supports 720p/1080i/1080p/2K/4K HDMI output resolution, and adjust the output resolution of the player according to the TV's specification. HDMI always has output, and CVBS only has output at 720P. |
| TV has no image | 1. Connect the correct video audio HDMI interface. 2. Press the remote control HDMI key to switch the correct output resolution. |
| Video output resolution is too low | Reset the resolution in "Main menu > Display > TV", and set according to the video output signal format of different terminals. |
| Aspect ratio can't be changed | The aspect ratio of certain DV/DVD is fixed. Refer to the TV manual to adjust the aspect ratio. |
| No audio | Check if the audio signal connection between the player and external device is loose, and insert properly. Ensure the audio output is set properly in "Main menu > Audio". If a power amplifier is connected, check if its input mode is set properly. |
| Can't hear desired audio effect | In "Main menu > Audio > Speaker", set the speaker properly according to the connected device. |
| Can't switch audio | Due to the difference in disc production, certain discs can't switch audio. |
| Forget the password of parent lock | Press the set key to enter the main menu page, select the security item to enter the parent-child lock modification page. Press Reset to resume initialization with the password 0000. |
| Blu-ray discs can't play PIP | Check if the disc supports PIP. Not all Blu-ray discs support this function. PIP and secondary audio need disc support. In the setting menu, select ON, and press "Screen control" while playing; this function is set in screen control menu. |
| Can't select audio channel and caption | The disc doesn't contain the language. Certain discs can't be changed, and only can be selected in disc menu. The disc doesn't contain caption information, or caption isn't enabled; press the [Caption] key to enable. |
| Support BD-J discs | Certain keys on the remote control are invalid for certain BD-J discs, e.g. select with numbers, program, repeat, return, zoom in and A-B. These discs contain playing navigation, integrate java, and the program can't process these discs; however, common DVD is valid. |
| BD-LIVE function | First, the disc must be marked with BD-LIVE, and ensure that the network is connected normally, insert USB disk. |
| Lyrics display of MP3 | Ensure that the BUDA in system setting is set to "External". The MP3 file and lyrics must have the same name, and the lyrics must be in LRC format. |
10. User Tips
- For the best 4K and HDR experience, ensure your TV and HDMI cables are compatible with 4K Ultra HD, HDR10+, and Dolby Vision standards.
- Regularly check for firmware updates to ensure optimal performance and compatibility with new media formats.
- When connecting to an audio receiver, consider using the dedicated HDMI 1.4 Audio Output or digital optical/coaxial outputs for the best sound quality.
- To prevent laser head issues, always keep a disc in the tray when the player is not in use for extended periods.
11. Warranty and Support
For warranty information, technical support, or service inquiries, please contact your local GIEC distributor or the point of purchase. Unauthorized repairs will void the product warranty.