SAGE LU MEI ES-CB

Contents

SAGE LU MEI ES-CB Casambi Bluetooth + RF SPI LED Controller User Manual

Model: ES-CB

1. Introduction

The SAGE LU MEI ES-CB is a versatile 5-24VDC Casambi Bluetooth + RF SPI LED Controller designed for controlling various LED light strips, including White, RGB, RGBW, and RGBCCT types. It features dual sensor and dual push switch inputs, offering flexible control options. The controller supports Casambi APP control for comprehensive management of lighting effects, color, and brightness, as well as RF 2.4G remote control.

This manual provides detailed instructions for the installation, operation, and maintenance of your ES-CB controller.

2. Safety Information

  • Ensure the input voltage (5-24VDC) matches the power supply specifications to prevent damage.
  • Do not expose the device to moisture or extreme temperatures.
  • All electrical connections should be performed by qualified personnel.
  • Disconnect power before installation or maintenance.
  • This device is designed for indoor use only.

3. Technical Specifications

Parameter Value
Model NumberES-CB
Features5-24VDC Casambi Bluetooth + RF SPI Controller
Input Voltage5-24VDC
Input Current6A
Max. Load Power6A
Pixel NumberMax. 2000
Input SignalBluetooth + RF 2.4GHz + Push Switch + Sensor
Output SignalSPI(TTL)
Connection ModeBluetooth+RF2.4GHz+Push Switch+Sensor
Applicable LightsLED (White, RGB, RGBW, RGBCCT SPI LED light strips)
MaterialABS
CertificationCE, RoHS
Operation TemperatureTa: -20°C ~ +55°C
Case Temperature (Max.)Tc: +65°C
IP RatingIP20
Package Size (LxWxH)120 x 50 x 22mm
Gross Weight0.0685kg
Warranty5 years
ProtectionReverse polarity

4. Setup and Installation

Before installation, ensure all power is disconnected. Refer to the wiring diagrams below for correct connections.

4.1 Mechanical Structures and Wiring Diagram

Mechanical Structures and Wiring Diagram for ES-CB Controller

Description: This image shows the mechanical dimensions (115.00mm x 46.00mm x 16.00mm) and the main wiring diagram for the ES-CB controller. It details connections for Power Input (+/-), Power Output (Strip-powered), CLK Signal Out, DATA Signal Out, GND, Match Key, and Indicator. It also illustrates connections for UP Push Switch, DW Push Switch, UP Sensor Input, and DW Sensor Input.

4.2 Sensor and Push Switch Connections

  1. Single or Dual Sensor Light Control:
    • Use a sense probe that outputs a 5V level signal.
    • Application Mode 1: Connect with one PIR or microwave motion sensor. Set the light switching mode to synchronous switch and the delay time for turning off the light to 10 seconds or longer in the Casambi APP.
    • Application Mode 2: Connect with two PIR or microwave motion sensors, or laser sensors for staircase lighting. Set the light switching mode to sequential switch and the delay time for turning off the lights to 30 seconds or longer in the Casambi APP.
    • Application Mode 3: Connect with one touch sensor, hand sweep sensor, or door control sensor probe. Set the light switching mode to synchronous switch and disable the delayed off time setting in the Casambi APP.
  2. Single or Dual Push Switch Manual Control:
    • Application Mode 1 (Staircase): Connect two push switches (UP at bottom, DW at top). Set light switching mode to sequential switch and delay time to 30 seconds or longer in Casambi APP.
    • Application Mode 2 (Single Switch): Connect one push switch. Set light switching mode to synchronous switch and disable delayed off time in Casambi APP.
    • Short press the push switch to turn on/off the light.

4.3 SPI Pixel Strip Connection (LED strip load over 6A)

  • If the SPI strip uses a single wire control method, the DATA and CLK signal outputs of the controller are the same, and one controller can connect two LED strips.
  • If the SPI strip uses a dual wire control method, one controller can connect one LED strip.
  • When the SPI strip load does not exceed 6A, the same power supply can power both the controller and the SPI strip.
  • When the load on the SPI strip exceeds 6A, separate power supplies are required for the controller and the SPI strip. Only DATA/CLK and GND signal lines are connected between the controller and SPI strip.
Wiring Diagrams for Push Switch and RF Remote Control, and Lighting Types Table

Description: This image illustrates wiring for UP/DW Push Switches and RF Remote Control. It also includes a table detailing various Lighting Types and Configurations (DIMx1, DIMx3, RGB, RGBW, RGBCCT) with their Model & Profile IDs and applications.

5. Operation

5.1 Casambi APP Connection and Operation

For first-time use, devices need to be added to the network. A device can only be part of one network. All Casambi devices are normally supplied in an unpaired state.

  1. Download the Casambi APP from the Apple App Store or Google Play Store.
  2. Power on the device; it automatically enters the config state.
  3. The APP will search for all Casambi devices within Bluetooth range of your mobile device.
  4. Once a device is added to the network, it can be controlled by the application.
Casambi APP Connection and Operation Overview

Description: This image provides an overview of the Casambi APP connection process, showing download options for App Store and Google Play, and illustrating Bluetooth mesh network range (up to 30m direct, up to 50m with repeater functionality).

5.2 Casambi APP User Interface and Settings

Casambi APP User Interface Details and Parameter Settings

Description: This image displays various screens of the Casambi APP user interface, including profile selection, mode settings, brightness adjustment, and detailed parameter settings for light color, lighting effects, effect speed, R/G/B/C/W color order, pixel length, light on/off modes, sensor delay off time, and turn on/off light speed.

5.2.1 Group Control

In the main interface, click "Group" in the upper left corner, select the fixture(s) you want to group, and create a group. The main interface will then show the new group, allowing you to control them together.

5.2.2 Scene Settings

Click "Edit" in the upper right corner of the scene interface to add, edit, or delete scenes.

5.2.3 Profile Selection

Double-click the controller icon to change the profile file through the "Model" in the setting interface. You can switch between 5 kinds of light types. Click "Start Update" to immediately switch the device to the corresponding light type.

5.2.4 Mode Settings / Startup Status / Brightness

  • Mode Settings: Long press "Mode 1/2/3" to edit/clear/cancel the setting mode.
  • Startup Status: Short press "Default Mode" to select power-on startup state.
  • Brightness: Slide the adjustment bar left/right to set the minimum/maximum brightness.
  • RGB-SPI/RGBW-SPI/RGBCCT-SPI Lighting Type: Long press the fixture icon to display the slider bar and color selection box. Adjust brightness, color temperature, RGB color, and color saturation.

5.3 RF Remote Lighting Control

  • Match: Short press the Match key on the controller, then immediately short press the on/off button of the remote. The LED indicator will fast flash, indicating a successful match.
  • Delete: Press and hold the Match key for 5 seconds. The LED indicator will fast flash, indicating all matched remotes were deleted.
  • When matching an RF remote control to control the switch, set the switch light mode to synchronous switch and disable the delayed off time setting in Casambi APP.
  • Supports R9, RTS, and TWS remote controls.

6. Troubleshooting

  • White strip type does not support light color settings: Custom color can be set via Casambi APP or RF remote control. Color multicolor can only be selected through the parameter setting screen.
  • Different light types have different strip chip selection types: When changing the light type, select the correct type of strip chip.
  • Static/dynamic mode color display not consistent with APP interface: Set the correct RGB color sequence of the light strip.
  • Maximum length of light strip is 2000 pixels: For example, a 5-meter strip with 60 pixels/meter can be set to a length of 300 pixels.
  • Set light strip length is less than actual length: The back part of the light strip cannot be controlled.
  • Dynamic mode loop interval time is too long: This may be due to a too large pixel length setting value. Reset the correct pixel length.
  • Dual-channel induction sensors or dual-channel push switches in stair lighting: It is recommended to set the lighting to turn on and off in sequence.
  • Lighting can be operated using a sense probe, push switch, or RF remote control: Automatic delayed off can be achieved by setting a delayed off time.
  • Switch on/off speed setting: This is only used for sequential switching on and off.

7. Maintenance

  • Keep the controller clean and free from dust. Use a soft, dry cloth for cleaning.
  • Avoid exposing the device to direct sunlight or high humidity.
  • Ensure proper ventilation around the controller to prevent overheating.

8. User Tips

  • Always test your wiring with a low voltage power supply before connecting to the LED strips to ensure correct polarity and connections.
  • Familiarize yourself with the Casambi APP interface for optimal control and customization of your lighting setup.
  • When using multiple control methods (APP, RF remote, push switch), ensure settings in the Casambi APP are configured to avoid conflicts.

9. Factory Default Parameter Setting

To restore the controller to factory default parameters, press and hold the Match key at the same time for 10 seconds.

Factory default parameters: Strip chip type TM1809, RGB color sequence, 300 pixels length, sequential light on, sequential light off, 30 seconds delay off time.

10. Warranty and Support

This product comes with a 5-year warranty. For detailed warranty terms and conditions, or for further technical support, please refer to the official user manual PDF available at: User Manual (PDF).

© 2024 SAGE LU MEI. All rights reserved.

Documents and downloads

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.