QIDEWIN H4/H7/H11/H8/H9/9005/9006/9012/5202/H16/881/880/H13/H3

Contents

QIDEWIN LED Projector Headlight Bulb User Manual

Models: H4, H7, H11, H8, H9, 9005, 9006, 9012, 5202, H16, 881, 880, H13, H3

1. Safety & Warnings

  • Installation and debugging should only be performed by professional personnel. Unauthorized modification of internal circuits or light sources is strictly prohibited.
  • For outdoor use, ensure the product's seal is intact to prevent damage from water accumulation. Keep the product away from sources of fire and corrosive environments.
  • Connect the headlight plug directly to the corresponding socket of your vehicle.
  • Caution: Keep the device and its cord out of reach of children under 3 years old.
  • Installation Caution: Avoid touching the LED chip with your bare hands during installation. Fingerprints can affect brightness and reduce the lifespan of the bulb.

2. Setup & Installation

These LED projector headlight bulbs are designed for a wide range of vehicles, including mainstream brands such as Toyota, Honda, Volkswagen, BMW, Mercedes Benz, and Audi. Ensure compatibility with your specific car model and year.

Installation Steps:

  1. Turn off your vehicle's power and open the car engine cover.
  2. Open the original dust cover and move out the original halogen bulb.
  3. Move out the chuck of the LED headlight.
  4. Fix the chuck of the LED headlight into the lamp socket.
  5. Connect the lamp power cord and put the headlight into the chuck, ensuring a firm connection without looseness.
  6. When installation is complete, connect the power and test the light. Adjust the light to achieve the best beam pattern (adjustable left and right).
  7. Organize the power cord/driver adapter neatly.
  8. Check if the cooling fan is working properly.
  9. Close the dust cover.

For visual guidance, refer to the installation diagram below:

Installation Steps for LED Headlight Bulb
Figure 1: Step-by-step visual guide for installing the LED headlight bulb. (1. Turn off power, open engine cover. 2. Open dust cover, remove halogen bulb. 3. Remove LED headlight chuck. 4. Fix LED headlight chuck. 5. Connect power cord, insert headlight. 6. Test and adjust light. 7. Organize power cord. 8. Check fan, close dust cover. 9. Example of adjusted light pattern.)

Product Overview:

QIDEWIN LED Projector Headlight Bulbs
Figure 2: Front and rear view of the QIDEWIN LED Projector Headlight Bulbs.
Video 1: Product demonstration showing the components, assembly, and light output of the LED headlight bulb.

3. Operating Instructions

Light Beam Effect:

These LED headlights provide a perfect cutting beam pattern, ensuring a more concentrated and penetrating light output for improved visibility.

Low Beam and High Beam Light Effect
Figure 3: Diagrams and road views illustrating the perfect cutting beam pattern for both low beam and high beam settings.
Standard Beam Pattern Comparison
Figure 4: Comparison of standard low beam (cut-off line) and high beam (focused) patterns.

Brightness and Visibility:

Experience ultra-high brightness with advanced CSP lamp beads, offering significantly brighter illumination compared to standard halogen bulbs and other LED types.

Brightness Comparison
Figure 5: Comparison showing the superior brightness of QIDEWIN LED (30000LM, 90W, +800% brighter) against halogen and other LED lights.
300% High Brightness
Figure 6: Visual comparison demonstrating 300% higher brightness for better night visibility, making it bright as daytime.

All-Weather Performance:

Equipped with IP67 waterproof technology, these headlights are designed to work reliably in extreme weather conditions, including snowy, rainy, and foggy environments.

IP67 Waterproof Technology
Figure 7: Images depicting the headlights performing well in rainy, snowy, and foggy conditions.

4. Maintenance & Storage

Cleaning:

Always turn off the device before cleaning. Use a soft, lint-free cloth to wipe the surface of the headlights. Avoid using abrasive cleaners or solvents that could damage the lens or housing.

Storage:

Store the headlights in a dry place at room temperature, ideally between 15°C and 35°C (59°F - 95°F). Protect them from direct sunlight and extreme temperatures.

Long-term Storage:

If the headlights will not be used for an extended period, it is recommended to store them in their original packaging or a protective container to prevent dust accumulation and physical damage.

5. Troubleshooting

Canbus Error / Flickering Issues:

These headlights feature an external driver with an intelligent Can-Bus controller designed to prevent error codes and flickering in 98% of vehicles. However, a few vehicles may still encounter error warnings or flicker issues after installation.

External Driver with Intelligent Can-Bus Controller
Figure 8: Illustration of the external intelligent driver that regulates power, eliminates radio interference, flickering, and prevents error codes.
Canbus Error Free Note
Figure 9: Note regarding Canbus error-free operation, stating that a few vehicles might still experience issues.

If you experience these issues:

  • Ensure all connections are secure and properly seated.
  • Verify that the vehicle's electrical system is functioning correctly.
  • In some cases, an additional CANBUS decoder or resistor might be required for specific vehicle models. Consult with a professional auto electrician or contact QIDEWIN customer support for further assistance.

6. Specifications

Product Parameters:

Product Parameters Laser Lens Headlight
Figure 10: Detailed product parameters for the Laser Lens Headlight.
FeatureDetail
Product NameCar light / Car accessories
Model NumbersH4, H7, H11, H8, H9, 9005, 9006, 9012, 5202, H16, 881, 880, H13, H3
Batch Number32778319
Color Temperature6000K (Cool White)
Wattage100W (Per bulb, as per product properties) / 150W (As per product parameter image)
VoltageDC 9V-36V (Fit 12V & 24V vehicles)
Luminous Flux9400LMS (Per bulb, as per product parameter image) / 20000LM (Product Lumen, as per product parameter image)
LED ChipsCSP3570
CoolingEfficient Cooling System: Aluminum Alloy Heat Sink + High Speed Silent Fan
Lifespan50,000 hours (As per product parameter image) / 80,000 hours (As per product description)
Working Temperature-40°C to +115°C
Waterproof LevelIP67
MaterialLED + Aviation 6063 Aluminum
CertificationsCE
Item TypeOther (Headlight, Fog Lamp, DRL)
Dimensions35mm (Width) x 91mm (Height)

7. User Tips

  • Before purchasing, double-check your vehicle's original bulb type to ensure you select the correct model (e.g., H4, H13).
  • When installing, ensure the bulb is fully seated and locked into place to prevent movement and ensure proper beam alignment.
  • After installation, test both low and high beams and adjust the headlight angle if necessary to achieve optimal road illumination without blinding oncoming traffic.
  • Keep the cooling fins clear of debris to ensure efficient heat dissipation and prolong the bulb's lifespan.

8. Disposal & Recycling

This product is marked with the WEEE symbol, indicating that it should not be disposed of with household waste. According to the WEEE Directive 2012/19/EU, this product must be taken to an appropriate electronic waste collection point for recycling. Proper disposal helps prevent potential negative consequences for the environment and human health.

9. Warranty & Support

For any warranty claims, technical support, or inquiries regarding your QIDEWIN LED Projector Headlight Bulbs, please contact the seller directly through your purchase platform. Provide your order details and a clear description of the issue for prompt assistance.

You can also refer to the official user manual PDF for additional details: View User Manual (PDF)

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.