I. Warnings & Safety Information
- Do not use in humid environments.
- Do not disassemble internal components without authorization.
- Ensure adequate ventilation to prevent overheating.
- Avoid high-temperature and high-humidity environments.
- Do not forcibly compress or deform the case.
- Prevent liquids from entering the interior.
II. Product Overview
The Jonsbo X400 Series ATX Case features a stereoscopic skeletal framework design, offering an aesthetic and functional solution for PC builds. It supports back-connect motherboards and provides optimized thermal dissipation with extensive fan and water cooling options. The case is available in X400 Gray, X400 White, and X400 Pro Gray variants.
Figure 1: Jonsbo X400 Series ATX Case models (X400 Gray, X400 White, X400 Pro Gray)
Video 1: Jonsbo X400 Series ATX Case features overview.
III. Setup Instructions
-
Preparation
- Place the PC case on a stable, level surface.
- Ensure adequate space around the case for ventilation.
-
Accessing Internal Components
The top cover, side panels, and base plate are equipped with tool-free snap fasteners for easy opening and closing, simplifying installation and maintenance.
Figure 2: Tool-free panel opening mechanism.
-
Motherboard Installation
- The case supports MINI-ITX, MICRO-ATX, and ATX motherboards, including back-connect designs.
- Install the motherboard and other components into their respective positions.
Figure 3: Motherboard compatibility and installation area.
-
Graphics Card Installation
- The case supports GPUs up to 427mm in length.
- Vertical installation of graphics cards is supported for aesthetic display of lighting effects. This requires purchasing a separate graphics card conversion bracket and PCI-E extension cable.
- When using vertical GPU installation, the bottom fan can be moved to the outer side of the chassis bottom.
Figure 4: Vertical GPU installation option.
Figure 5: GPU length compatibility.
-
Power Supply Installation
- The case supports ATX PS2 power supplies with a maximum length of 180mm.
Figure 6: Power supply installation area and length limit.
-
Drive Installation
- Supports 1x 2.5" SSD and up to 2x 3.5" HDD.
- When using a back-mounted motherboard, the hard drive rack only supports the installation of one 3.5-inch HDD drive.
Figure 7: Drive bay configuration.
-
Cooling System Installation
- The chassis has a total of 13 fan slots for optimized airflow.
- Fan Support: Top: 3x 120mm / 2x 140mm (optional); Side: 3x 120mm (optional); Back: 2x 120mm (optional); Rear: 2x 120mm (optional); Bottom: 3x 120mm (optional).
- Water Cooling Support: Top: 240mm/280mm/360mm radiators; Side: 360mm radiators.
- The total top space is 95mm, supporting cold row sandwich burger mode.
- Top installation of 280mm cold row or 2x 140mm fans requires removal of the motherboard compartment air guide cover.
- When installing the cold exhaust pipe in the middle, it is necessary to remove the motherboard compartment air guide cover.
- Side 360mm cold row does not support adding additional components (hamburgers).
- CPU heatsink height limit: 176mm.
- An auxiliary air-cooling system allows installation of dual 12CM fans in the rear compartment to direct airflow to the motherboard, enhancing stability for high-power hardware.
Figure 8: Cooling system overview.
Figure 9: Detailed fan installation diagram and compatibility notes.
Figure 10: Motherboard auxiliary air-cooling system.
-
Front I/O Connections
- The front panel includes: 2x USB 3.2 Gen 1 Type-A, 1x USB 3.2 Gen 2 Type-C, 1x Audio, and 1x Mic port.
- The front-end IO wiring is designed to be hidden for a more organized build.
Figure 11: Front I/O interface layout.
Figure 12: Hidden front-end I/O wiring.
-
Cable Management
- The case features a removable dual-wire guard plate with a backrest for refreshing computer setup experience and improved cable management.
Figure 13: Removable wire guard plate.
-
Power On
- Connect the power cord to the system and power on.
IV. Operating Instructions
- Once all components are installed and connected, press the power button on the front I/O panel to start your system.
- The IO position features ARGB light strip decoration. Ensure it is inserted into a valid 5V ARGB light effect connector to enable lighting, enhancing the gaming atmosphere.
- The transparent side panels allow for full exposure of internal lighting effects and screen content from compatible components.
Figure 14: Case in operation with internal lighting.
V. Maintenance
- Regularly clean dust from the case interior and fan filters to maintain optimal airflow and cooling performance.
- Use a soft, dry cloth for cleaning exterior surfaces. Avoid abrasive cleaners or solvents.
- Ensure all panels are securely closed after maintenance to prevent dust ingress and maintain structural integrity.
VI. Troubleshooting
- Unit fails to power on: Check all power connections, including the power supply unit, motherboard, and front panel power switch.
- Poor heat dissipation:
- Clean any accumulated dust from fans and radiators.
- Consider adding additional fans or upgrading existing cooling components if temperatures remain high.
- Verify that the motherboard auxiliary air-cooling system (if installed) is functioning correctly.
Figure 15: Temperature comparison with and without back compartment fans, highlighting cooling benefits.
- Excessive noise: Verify that all screws, especially those securing fans and components, are securely tightened. Check for any loose cables or components vibrating against the case.
VII. Specifications
X400 Model
| Feature | Specification |
|---|---|
| Product Model | X400 |
| Chassis Materials | SPCC&SECC, ABS plastic, tempered glass |
| Chassis Size (D/W/H) | 460.2mm * 310.3mm * 476.5mm |
| Compatible Motherboards | MINI-ITX/MICRO-ATX/ATX, compatible with back plug motherboards |
| Drive Bays | 2.5" SSD: 1 unit; 3.5" HDD: up to 2 |
| Front Interface | USB 3.2 Gen 1 Type-A * 2 / USB 3.2 Gen 2 Type-C * 1 / AUDIO * 1 & MIC * 1 |
| Fan Support (Top) | 3 * 120mm / 2 * 140mm (optional) |
| Fan Support (Side) | 3 * 120mm (optional) |
| Fan Support (Back) | 2 * 120mm (optional) |
| Fan Support (Rear) | 2 * 120mm (optional) |
| Fan Support (Bottom) | 3 * 120mm (optional) |
| Water Cooling Support (Top) | 240mm/280mm/360mm specification cold row |
| Water Cooling Support (Side) | 360mm specification cold row |
| ATX PS2 Power Supply Compatibility | ≤ 180mm |
| CPU Heatsink Height Limit | 176mm |
| GPU Compatible Size | Limited to 427mm in length |
| Net Weight | 10.2kg |
| Gross Weight | 12.2kg |
X400 Pro Model
| Feature | Specification |
|---|---|
| Product Model | X400 PRO GRAY |
| Chassis Materials | SPCC&SECC, ABS plastic, tempered glass, aluminum alloy |
| Chassis Size (D/W/H) | 460.7mm * 310.9mm * 476.8mm |
| Compatible Motherboards | MINI-ITX/MICRO-ATX/ATX, compatible with back plug motherboards |
| Drive Bays | 2.5" SSD: 1 unit; 3.5" HDD: up to 2 |
| Front Interface | USB 3.2 Gen 1 Type-A * 2 / USB 3.2 Gen 2 Type-C * 1 / AUDIO * 1 & MIC * 1 |
| Fan Support (Top) | 3 * 120mm / 2 * 140mm (optional) |
| Fan Support (Side) | 3 * 120mm (optional) |
| Fan Support (Back) | 2 * 120mm (optional) |
| Fan Support (Rear) | 2 * 120mm (optional) |
| Fan Support (Bottom) | 3 * 120mm (optional) |
| Water Cooling Support (Top) | 240mm/280mm/360mm specification cold row |
| Water Cooling Support (Side) | 360mm specification cold row |
| ATX PS2 Power Supply Compatibility | ≤ 180mm |
| CPU Heatsink Height Limit | 176mm |
| GPU Compatible Size | Limited to 427mm in length |
| Net Weight | 11.3kg |
| Gross Weight | 13.1kg |
VIII. User Tips
- Fans are Optional: Note that fans are listed as optional in the specifications. If you require cooling fans, ensure to purchase them separately according to your needs.
IX. Warranty & Support
- Warranty Period: 1 year from the date of purchase.
- For detailed instructions and further support, please refer to the official user manual PDF: Jonsbo X400 Series User Manual (PDF).