IRALAN SM-FAN

Contents

IRALAN LED Ceiling Fan with Remote Control

Model: SM-FAN | Brand: IRALAN

1. Introduction and Safety Information

Thank you for purchasing the IRALAN LED Ceiling Fan. Please read this manual carefully before use and keep it for future reference. This manual provides important information for the safe installation, operation, and maintenance of your ceiling fan.

1.1 General Safety Warnings

  • General Warning: This symbol indicates potential hazards. Failure to observe warnings may result in injury or damage.
  • Electrical Safety: Installation must be performed by a qualified electrician. Ensure the main power supply is switched off at the circuit breaker before installation, maintenance, or cleaning. Do not attempt to repair the product yourself.
  • Heat Warning: The lamp and lampshade can become very hot during operation. Avoid touching them directly to prevent burns.
  • Indoor Use Only: This product is suitable for indoor use only.
  • Children: This product is not a toy and is not suitable for children to operate without supervision.
  • Double Insulated: This lamp is double insulated and does not require connection to a protective earth-terminal.
  • Protective Conductor: If applicable, this lamp must be connected with its protective conductor (green-yellow wire) to the protective earth-terminal.

2. Package Contents

Carefully unpack the box and ensure all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

  • 1 x LED Ceiling Fan Light Unit (includes light rings, central motor unit, and fan blades)
  • 1 x Remote Control
  • 1 x Control Box/Receiver
  • 1 x Mounting Bracket (Cross-shaped)
  • 1 x Set of Screws and Wall Plugs
  • 1 x Small Wrench
Exploded view of IRALAN LED Ceiling Fan components

Figure 2.1: Exploded view of fan components.

3. Specifications

FeatureSpecification
Model NumberSM-FAN
Brand NameIRALAN
MaterialABS, Iron, PMMA
Nominal Voltage85-265V (AC)
Power40W
Light SourceLED bulbs
Luminous Flux2000-82000 LM (3020 LM specified in diagram)
Color Temperature3000K (Warm), 4500K (Natural), 6500K (Cold White)
DimmableYes (Stepless Dimming)
Control MethodRemote Control, APP
Wind Speed6 Gears
Application Space10-20㎡
Dimensions (LxWxH)49cm x 30cm x 15cm (18cm height from diagram)
Weight1.89kg
CertificationsCCC, CE, EMC, LVD
Warranty2 years
IRALAN LED Ceiling Fan dimensions diagram

Figure 3.1: Product dimensions.

4. Setup and Installation

Important: Installation must be carried out by a qualified electrician. Ensure power is disconnected at the main circuit breaker before starting.

4.1 Installation Video Guide

Video 4.1: Assembly and installation demonstration of the IRALAN LED Ceiling Fan.

4.2 Step-by-Step Installation

  1. Prepare Mounting Surface:
    • For wooden ceilings, use wood screws with washers to secure the mounting bracket.
    • For concrete ceilings, use expansion screws to secure the mounting bracket.
  2. Assemble Light Rings: Attach the two light rings to the main body of the fan using the provided nuts and bolts. Ensure the wires are properly routed through the designated holes.
  3. Install Fan Blades: Securely attach the fan blade assembly to the central motor shaft. Use the provided cap/nut to fasten it firmly.
  4. Connect Control Box: Connect the wires from the light rings and the fan motor to the control box/receiver. Ensure all connections are secure and match the labels (e.g., motor output, LED link).
  5. Wire to Mains Power: Connect the main power supply wires (Live, Neutral) to the corresponding terminals on the control box. Ensure proper polarity.
  6. Mount Fan to Ceiling: Carefully lift the assembled fan unit and attach it to the pre-installed mounting bracket on the ceiling. Secure it with the appropriate screws.
  7. Final Check: Ensure all connections are tight and the fan is securely mounted. Restore power and test the fan and light functions.

5. Operating Instructions

Your IRALAN LED Ceiling Fan can be controlled via the included remote control or a dedicated smartphone application.

5.1 Remote Control Functions

Remote control layout for IRALAN LED Ceiling Fan
  • 1H/2H (Timer): Sets the fan to turn off automatically after 1 or 2 hours.
  • F/R (Forward/Reverse): Switches between summer (forward) and winter (reverse) modes.
  • Fan On/Off: Turns the fan on or off.
  • Fan Speed (1-6): Adjusts fan speed from 1 (low) to 6 (high).
  • Lamp On/Off: Turns the LED light on or off.
  • Light Brightness (+/-): Adjusts the brightness of the LED light (stepless dimming).
  • Color Temperature (K button): Cycles through 3000K (Warm Light), 4500K (Natural Light), and 6500K (Cold White Light).
  • SETUP: Used for remote control pairing (see Troubleshooting).

Stepless dimmable light and 6-speed wind adjustment

Figure 5.1: Light color temperatures and fan speed settings.

5.2 Fan Modes (Summer/Winter)

Winter and Summer fan modes diagram

Figure 5.2: Winter and Summer modes.

  • Summer Mode (Forward): Fan blades rotate counter-clockwise, creating a downward airflow that provides a cooling effect.
  • Winter Mode (Reverse): Fan blades rotate clockwise, creating an upward airflow that circulates warm air trapped near the ceiling, balancing room temperature.

5.3 APP Control

The fan also supports control via a smartphone application. Please refer to the app's instructions for pairing and usage. (App name not specified, typically found in product listing or QR code on packaging).

6. Maintenance

  • Cleaning: Ensure the power is off before cleaning. Wipe the fan and light with a soft, dry or slightly damp cloth. Do not use abrasive cleaners or solvents.
  • Remote Control Batteries: To change batteries, slide the cover downwards on the back of the remote. Insert 2x AAA batteries, observing polarity. Slide the cover back. (Batteries not included).
  • Bulb Replacement: The LED bulbs are integrated and not user-replaceable. If the light source fails, the entire luminaire must be replaced.

7. Troubleshooting

7.1 Light or Fan Not Responding to Remote Control

  1. Check Batteries: Ensure the AAA batteries in the remote control are inserted correctly and are not depleted. The indicator light on the remote should flicker when buttons are pressed.
  2. Remote Pairing: If the remote is not paired, turn off the main power to the fan for 10 seconds, then turn it back on. Within 5 seconds of restoring power, press and hold the 'SETUP' button on the remote until you hear a beep or see the light flash, indicating successful pairing.
  3. Power Connection: Verify that the fan is correctly connected to the main power supply and that the circuit breaker is on.

7.2 Light Flickers

  • Dimmer Compatibility: This lamp is not suitable for operation with an external dimmer switch. If you have an external dimmer, it must be removed from the supply line.
  • Loose Connection: Check all electrical connections to ensure they are secure.

7.3 Fan Not Working

  • Power Supply: Ensure the fan is receiving power.
  • Remote Control: Check remote batteries and pairing.
  • Obstructions: Ensure nothing is obstructing the fan blades.

8. User Tips

  • Easy Assembly: Users have noted that the fan is very easy to assemble and install, often taking less than 30 minutes.
  • Optimal Comfort: Experiment with the 6-speed settings and the winter/summer modes to find your ideal comfort level throughout the year.
  • Lighting Ambiance: Utilize the stepless dimming and three color temperature options to create the perfect ambiance for any activity, from bright task lighting to soft mood lighting.

9. Warranty and Support

9.1 Warranty Statement

This IRALAN LED Ceiling Fan comes with a 2-year manufacturer's warranty from the date of purchase. This warranty covers the lamp and its integrated light source against malfunctions due to non-human factors.

9.2 Warranty Exclusions

The warranty does not cover:

  • Damage caused by improper use, self-disassembly, modification, or unauthorized repair.
  • Damage caused by force majeure events such as natural disasters or accidents.

9.3 Service Process

If you encounter any product malfunctions within the warranty period, please contact customer service with the following information:

  • Purchase receipts
  • Product model (SM-FAN)
  • Detailed description of the malfunction symptoms
  • Photos or videos of the malfunction (if applicable)

Our customer service team will assess the issue and provide appropriate solutions, which may include repair, replacement, or further assistance.

9.4 Contact Support

For warranty claims or technical support, please contact:

Email: Lightkundservice@hotmail.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.