tungfull 8065, N86, DKB, 8952, 659

Contents

Tungfull Cordless Rotary Tool User Manual

Models: 8065, N86, DKB, 8952, 659

1. Introduction

Welcome to your new Tungfull Cordless Rotary Tool. This versatile mini electric grinder pen is designed for a wide range of DIY projects, including engraving, polishing, drilling, cutting, and rust removal. Its portable, wireless design and USB charging capability make it convenient for use anywhere. This manual provides essential information on safety, setup, operation, and maintenance to ensure optimal performance and longevity of your tool.

2. Safety Instructions

2.1 General Safety

  • Keep your work area clean and well-lit. Cluttered or dark areas invite accidents.
  • Do not operate electrical tools in damp locations or near flammable liquids or gases.
  • Wear appropriate personal protective equipment, including safety glasses to protect your eyes and protective hair covering to prevent entanglement.
  • Ensure proper ventilation when working with materials that produce dust or fumes.
  • Keep children and unauthorized persons away from the work area.
  • Use the correct tool for the job. Do not force small tools or accessories to perform tasks beyond their intended capacity.
  • If the noise level exceeds 70 dB, consider using hearing protection or turning off the device.

2.2 Tool Specific Safety

  • Always ensure the collet nut is securely tightened before operation.
  • When changing accessories, use the spindle lock button to hold the spindle in place.
  • Do not use damaged or worn accessories.

3. Components Overview

The Cordless Rotary Tool typically includes the following main components:

  • 1. Collet Nut: Secures accessories in place.
  • 2. Spindle Lock Button: Engages to hold the spindle for accessory changes.
  • 3. Switch/Power Button: Turns the tool on/off and often controls speed.
  • USB Charging Port: For recharging the internal battery.
  • Speed Control Buttons/Dial: Adjusts the rotational speed.
Tungfull N86 Cordless Rotary Tool with accessories and speed settings
An orange Tungfull N86 Cordless Rotary Tool, highlighting its main body, collet, and control buttons. The image also shows various accessories and speed settings.

4. Setup

4.1 Unboxing

Carefully remove all components from the packaging. Verify that all items listed in your specific model's packaging list are present.

4.2 Charging

  • Before first use, fully charge the tool.
  • Connect the provided USB charging cable to the tool's Type-C port and a suitable USB power source (e.g., wall adapter, computer, power bank).
  • The charging indicator (if present) will show the charging status.

Video demonstrating the unboxing, Type-C quick charge, and accessory installation for the Cordless Rotary Tool.

Lithium-ion battery charging via USB
An illustration of a lithium-ion battery being charged via a USB interface, emphasizing wireless binding, convenience, and fast charging.

4.3 Installing Accessories

  1. Press and hold the spindle lock button.
  2. Unscrew the collet nut.
  3. Select the appropriate collet for your accessory's shank size (0.5-3.2mm clamping range).
  4. Insert the collet into the tool's chuck.
  5. Insert the desired accessory (e.g., grinding bit, cutting disc, drill bit) into the collet.
  6. While still holding the spindle lock button, tighten the collet nut securely. Do not overtighten.
Five replaceable collets for various sizes
An image displaying five replaceable collets compatible with accessories ranging from 0.5mm to 3.2mm, along with the collet nut and the tool's chuck.

5. Operation

5.1 Power On/Off and Speed Adjustment

  • Press the power button to turn the tool on or off.
  • Use the speed control buttons or dial to select the desired RPM. Models may offer 3-speed (e.g., 8500/16500/21000rpm for N86) or 5-speed settings (e.g., 3000-15000rpm for 659).

5.2 Applications

  • Grinding/Polishing: Use appropriate grinding stones or polishing pads for smoothing surfaces, removing rust, or polishing materials like jade or wood.
  • Cutting: Attach a cutting disc for light cutting tasks on materials like wood.
  • Drilling: Use small drill bits for precision drilling.
  • Engraving/Lettering: Utilize engraving bits for detailed work on various surfaces.
Rotary tool used for lettering, cutting, rust removal, drilling, polishing, and grinding
A collage of six images demonstrating various applications of the rotary tool: lettering, cutting, rust removal, drilling, polishing, and grinding.
Rotary tool used for nail art applications
An image illustrating the tool's use for nail art, specifically for removing nail polish, nail art patches, and exfoliating scrub.

5.3 Technique

Apply light, consistent pressure. Let the tool do the work. Avoid excessive force, which can damage the tool or the workpiece.

6. Maintenance

  • Cleaning: After each use, clean the tool and accessories to remove dust and debris. Use a soft cloth.
  • Storage: Store the tool and its accessories in a dry, safe place, away from direct sunlight and extreme temperatures. Keep out of reach of children.
  • Battery Care: For optimal battery life, avoid fully discharging the battery frequently. Charge the tool regularly, even if not in use for extended periods.

7. Troubleshooting

  • Tool not turning on:
    • Check if the battery is charged. Recharge if necessary.
    • Ensure the power button is pressed firmly.
  • Accessory wobbles or falls out:
    • Ensure the correct collet size is used for the accessory shank.
    • Tighten the collet nut securely.
    • Check if the accessory shank is bent or damaged. Replace if needed.
  • Reduced performance/speed:
    • Battery might be low. Recharge the tool.
    • Accessory might be dull or worn. Replace it.
    • Excessive pressure is being applied. Reduce pressure.

8. Specifications

8.1 General Specifications (may vary by model)

  • Power Source: Battery (Lithium-ion)
  • Charging: USB (Type-C Quick Charge)
  • Collet Range: 0.5-3.2 mm (compatible with various accessories)
  • Battery Included: Yes
  • Origin: Mainland China

8.2 Model-Specific Specifications

Comparison of five rotary tool models
A visual comparison of five different rotary tool models (8065, N86, DKB, 8952, 659) with their respective designs.
Model 8065 Specifications
FeatureSpecification
Size30mm * 150mm
No-load Speed16000rpm
Voltage3.7V
Collet MaterialMetal
Charging ModelUSB
Model 8065 specifications table
Detailed specifications for the Model 8065 rotary tool.
Model N86 Specifications
FeatureSpecification
Size36mm * 194mm
Speed8500-21000rpm (3-speed)
Voltage3.7V
Gear3-speed
Charging ModelUSB
High Power35W
Model N86 specifications table
Detailed specifications for the Model N86 rotary tool.
Model DKB Specifications
FeatureSpecification
Size25mm * 203mm
No-load Speed11000rpm
Battery2000mAh
Voltage3.7 Volt
Charging ModelUSB
Model DKB specifications table
Detailed specifications for the Model DKB rotary tool.
Model 8952 Specifications
FeatureSpecification
Size30mm * 150mm
Speed6000-15000rpm (3 gears)
Voltage3.7V
Gear3 gears
Charging ModelUSB
Model 8952 specifications table
Detailed specifications for the Model 8952 rotary tool.
Model 659 Specifications
FeatureSpecification
Size32mm * 179mm
Speed3000-15000rpm (5-speed)
Voltage3.7V
Gear5-speed
Charging ModelUSB
Model 659 specifications table
Detailed specifications for the Model 659 rotary tool.

9. User Tips

  • For delicate work, start with the lowest speed setting and gradually increase as needed.
  • When polishing, use a light touch and consistent motion for best results.
  • Always ensure the workpiece is stable and secured before beginning any operation.
  • Keep a variety of accessories on hand to tackle different materials and tasks effectively.

10. Frequently Asked Questions (FAQ)

Q: How do I change accessories?
A: Press the spindle lock button, unscrew the collet nut, insert the new accessory with the correct collet, and tighten the nut while holding the lock button.
Q: What is the clamping range for accessories?
A: The tool is compatible with accessories having a shank diameter between 0.5mm and 3.2mm.
Q: How long does the battery last?
A: Battery life varies depending on the model and usage intensity. Regular charging is recommended.
Q: Can I use this tool for metalworking?
A: Yes, it can be used for light grinding and rust removal on metals with appropriate accessories.

11. Warranty and Support

For any issues or inquiries, please refer to the seller's contact information or the official Tungfull website for support. Keep your purchase receipt for warranty claims.

A detailed user manual in PDF format is available for download: Download User Manual (PDF).

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.