Cardo Packtalk Neo

Contents

Cardo Packtalk Neo Motorcycle Helmet Bluetooth Headset User Manual

Model: Packtalk Neo

1. Introduction

The Cardo Packtalk Neo is a premium motorcycle helmet Bluetooth headset designed for superior communication and entertainment on the road. Featuring Dynamic Mesh Communication (DMC) 2.0, Bluetooth 5.2, JBL sound quality, and IP67 waterproof rating, it ensures a connected and enjoyable riding experience.

2. Setup

2.1. Package Contents

Before you begin, ensure all items are present in your Packtalk Neo package:

Cardo Packtalk Neo Package Contents
Figure 1: Packtalk Neo Package Contents. Includes the main unit, JBL earphones, various microphones, mounting hardware, and accessories.
  • Cardo Packtalk Neo Unit
  • JBL 40mm Earphones
  • Base (Mounting Cradle)
  • Snap Buckle (Helmet Clamp)
  • Wired Microphone
  • Fixer (Adhesive Plate)
  • Audio Connector
  • Velcro Pads (for speakers and microphone)
  • Boom Microphone

2.2. Mounting to Helmet

The Packtalk Neo can be mounted to most helmets using either the clamp mount or the adhesive plate. Ensure the unit is securely attached and the speakers are positioned correctly inside the helmet for optimal audio quality.

2.3. Charging the Device

The Packtalk Neo features a USB Type-C port for fast charging. Before first use, fully charge the device.

Cardo Packtalk Neo Charging and Battery Life
Figure 2: Charging and Battery Performance. The device supports fast charging via USB Type-C.
  • Charging Time: Approximately 2 hours for a full charge.
  • Fast Charge: 20 minutes of charging provides up to 2 hours of battery life.
  • Continuous Intercom: Up to 13+ hours.
  • Standby Time: Up to 10 days.

2.4. Powering On/Off

To power on or off your Packtalk Neo, locate the Media button (usually the front-most button on the unit).

  • Power On: Press and hold the Media button for approximately 2 seconds until the LED indicator lights up.
  • Power Off: Press and hold the Media button for approximately 2 seconds until the LED indicator turns off.

2.5. Pairing with Your Phone

To connect your Packtalk Neo to your smartphone via Bluetooth:

  1. With the device powered on, press and hold the Phone button (usually the rear-most button) for approximately 5 seconds until the LED flashes red and blue.
  2. On your smartphone, go to Bluetooth settings and search for new devices.
  3. Select

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.